Project Welding
Resume:
CURRICULUM VITAE
PERSONAL INFORMATION
Name : Suryoko Pasaribu.
Place/ Date of Birth : Duri - Riau,September 1st,1978
Address : Perum Ricci A7 No.12 Sekupang BATAM 29422
Nationality : Indonesian
Gender : Male
Phone Number : +62-822********
Passport Number : A 8729791
Email : ***************@*****.***
*************@*****.***
Hobbies : Traveling, watch a movie
Education : University of North Sumatera, Indonesia.
Majoring in Mechanical Engineering, Medan North Sumatera - Indonesia
SUMMARY OF EXPERIENCES:
QA-QC Inspector with approximately 14 years of experiences in the field of inspection which include construction and fabrication of onshore pressure vessel, Process Modules, piping, Line Pipe, structural, shipbuilding, Substation and other facilities project for offshore and onshore with various material such as Welding for Carbon steel, Galvanized Steel, Stainless steel, Duplex and Super Duplex, Carbon steel with Cladding 309 LMO, ErNiCrMo-3, Brazing for Cu-Ni, Mechanical rivets for Aluminum. Familiar with welding process SMAW for Carbon steel, GTAW (Auto and Manual) For Carbon Steel, Stainless Steel, Duplex, CRA Alloys, Nickel Alloy, Aluminum, Welding Process SAW for Carbon Steel and GMAW for Carbon Steel.
TRAINING & COURSES
No.
Training Name / Courses / Workshop
Description / Location / Certified by:
1
Structural Welding
Conducted by CB&I on August 2015
Date of Expiry: 30 September 2018
2
Stud Welding
Conducted by CB&I on August 2015
Date of Expiry: 30 September 2018
3
ASME NQA-1 / ANSI N45.2.6 level 2
Conducted by CB&I on June 2014
Date of Expiry: 25 June 2017
4
Welding Inspector level 2
CSWIP 3.1
Conducted by : PT. DUJ – Authorized by TWI SEA TWI (The Welding Institute – UK)
Certified by CSWIP http://www.cswip.com
Reg. No : 60734/2 Date of Expiry : December 2020
5
Coating Inspector
Conducted by INDOCOR
Certificate ID no: CCI 010 / IC.I/I-7/VIII/2006
6
Radiographic Interpretation
Level II (ASNT-SNT-TC-1A)
Certified by Training and Certification Program MSS
Cert. No : 380/RI/RE/13 Expiry : 2018
7
Ultrasonic Test
Level II (ASNT-SNT-TC-1A)
Certified by Training and Certification Program MSS
Cert. No : 751/UT/N/13 Expiry : 2018
8
Magnetic Particle Test
Level II (ASNT-SNT-TC-1A)
Certified by Training and Certification Program MSS
Cert. No : 934/MT/N/13 Expiry : 2018
9
Liquid Penetrant Test
Level II (ASNT-SNT-TC-1A)
Certified by Training and Certification Program MSS
Cert. No : 895/PT/N/13 Expiry : 2018
10
Welding Inspector
(Jan 2008-April 2008)
Conducted by: B4T-Bandung
Certified by Education, Examination and Qualification at the centre for material and technical Product ( B4T) Bandung
OTHER SKILLS AND KNOWLEDGE
Computer & Programs
Proficient Computer skills in MS Offices, MS Excels, Windows Work
Welding Process
SMAW, GTAW, SAW, FCAW, GMAW, PAW, Plasma Cutting.
Destructive Testing
Impact testing, Tensile, Bending, Hardness, Shear, Chemical testing, Microstructure Examination, Macro Examination, Corrosion Testing
NDT
MT,PT,UT, RI
Code and Standard
ASTM, AWS D1.1, ASME SECT. II,, ASME Sec III, ASME SECT. V, ASME SEC. VIII, ASME SECT. IX, ASME B31.3, ASME B31.8, AS 1210, AS 1554, DNV OS F101, API 5LD, API 5LC, API 5L, ASME NQA-1 1994, AWS D1.6, AWS D1.4, AWS D1.3
WORKING EXPERIENCE
June 2014 – May 2016
INTERTEK TECHNICAL INSPECTION SERVICES
Position: ASME NQA-1 Inspector / Nuclear Source Inspector representative of WECTEC, LLC a subsidiary company of Westinghouse Formerly CB&I Stone & Webster, Inc. at IHI, Yokohama - Japan
Job No : 132176 & 132178
Material : Carbon Steel, Duplex Stainless Steel
Project : VC Summer EPC Unit 3 & Vogtle EPC Unit 4
Item List :
API 1000 Structural Modules
General Responsibilities:
Attend daily Safety Meeting and project inspection arrangement
Review client spec, material spec, engineering spec, supplier procedure
Verify Material Storage, Material Identification and Ensure that correct identification has been stamped on component as per ASME NQA-1 requirement.
Assists as required in the inspection of materials and equipment received at site and pre-fabrication shop.
Perform visual inspection on bevel and material after cutting performed.
Witnessed Fit up, and Dimensional inspection prior welding
Responsible for inspection and measurement of products and components to ensure performance meets job quality and design requirements in accordance with Company procedures, specifications, code and international standards to monitor the construction process from all aspects.
Monitoring of Welding parameters during welding.
Performed welding visual inspection.
Visual inspection including dimension checks of critical or major dimensions.
Reviews inspection results and witnesses NDT (UT & PT).
Witness Final Dimensional.
Witness Blasting and Painting activity.
Witness Pre shipment inspection and Packaging activity.
Review and monitoring contractor NCR and verify for closure justification.
Reviews Contractor PQRs and WPS.
Ensure all calibrated equipment used within the test and inspection process is within calibration date and rated for the work activities
Performance additional duties as directed by Lead SI
Review Inspection report and final documentation
To assist in QA activities when required
To work at all times to the Company’s Quality management System achieve.
Dec. 2013 – May 2014
INTERTEK TECHNICAL INSPECTION SERVICES
Position: QA/QC Inspector representative of Dockwise Shipping B.V at DryDock World Graha, Batam INDONESIA
Client : Exxon Mobile Malaysia
Project : Reconditioning Grillage and Steel structure secondary steel work
General Responsibilities:
Review the QA/QC documents.
Verify Material Identification (Carbon Steel / Stainless steel )
Witness and Monitoring Welding
Witness Visual and Dimensional Inspection before welding and after welding
Witness and monitoring NDT after welding
Witness Final Inspection
Witness Pre-shipment & Loading Inspection
Apr. 2011 – Nov. 2013
BUREAU VERITAS INDONESIA
Position: Third Party Inspector in various project assignment
Project :
Iraq Crude Oil expansion export project (ICOEEP) Fabrication and Erection of Offshore platforms like Cellar deck (L75MxW81M) Mezzanine Deck (L60MXW63M) Main Deck (L55MX79M) and related piping works and Skid mounted metering system packages.
Location : Saipem Indonesia Karimun Yard
Ras Gas Barzan Project CT-141
Client : Hyundai Heavy Industry
Location : Cladtek Bi-metal, Batam – Indonesia
Gorgon Barrow Island LNG Plant Fabrication and erection of Floating Jetty and Pontoons
Client : Chevron Australia Pty Ltd
Location : Batam & Karimun – Indonesia
General Responsibilities:
Review the QA/QC documents.
Verify Material Identification (Carbon Steel, CRA Material)
Witness and Monitoring Welding (Automatic and Manual GTAW)
Witness Visual and Dimensional Inspection Pipe before Overlaid, After Overlaid and After Machining.
Witness and monitoring NDT after Overlaid and After machining (UT Thickness Gauging, UT Lamination / Disbonding, DPI)
Witness PMI Testing.
Witness Final Inspection
Witness Pre-shipment & Loading Inspection
March 2009 – March 2011
McDERMOTT INDONESIA
Position: QA/QC Inspector
Client : Woodside Australia Energy Limited, Chevron Thailand Pty Ltd, ESSO
Australia
Project : North Rankin Redevelopment Project, Platong Gas II Project, ESSO
Kipper Tuna Turrum
General Responsibilities:
Attend on Pre-Inspection meeting
Review the QA/QC documents.
Verify Material Identification.
Witness of weld procedure qualification and welder/welding operator qualification tests.
Witness of Mechanical Testing, Chemical Testing.
Conduct witness Fit up, Visual, Dimensional inspection & Monitoring of Welding parameters during welding.
Visual inspection including dimension checks of critical or major dimensions.
Witness and monitoring NDT after pass visual inspection (UT, MPT, RT)
To monitor the construction process from all aspects to ensure performance meets job quality and design requirements in accordance with Company procedures, specifications, code and international standards.
Witness Final Inspection
Witness Pre-shipment & Loading Inspection
May 2008 – Nov. 2008
TRUBA JAYA ENGINEERING
Position: QA/QC Engineer
Client : Energy Sengkang
Project : Sengkang Power Plant Expansion Project ( Installation and Erection of
Piping, Structural Mechanical Equipment’s for Gas Turbine Power
Plant 3 x 60 MW.
General Responsibilities:
Attend on Pre-Inspection meeting
Review the QA/QC documents.
Verify Material Identification (Carbon Steel, stainless steel)
Witness and Monitoring Welding (GTAW, SMAW)
Witness of welding procedure qualification and welder/welding operator qualification tests.
Witness of Mechanical Testing, Chemical Testing, Corrosion testing, Macro Examination, Microstructure Examination, Ferrite estimation.
Witness Visual and Dimensional Inspection Pipe before welding, After welding.
Witness and monitoring NDT after welding and After machining (UT Thickness Gauging, UT Lamination / Disbonding, DPI)
Review and Interpret RT Films.
Witness Hydrostatic Testing
Witness PMI Testing.
Witness Final Inspection
Witness Pre-shipment & Loading Inspection
Jan 2007 – Jan 2008
PT. SUPERINTENDING COMPANY OF INDONESIA
Position: Coating and Painting Inspector
Client : Chevron Pacific Indonesia
Projects:
Coating external pipe line underground project
Coating external boiler body for all Steam station project
General Responsibilities:
Preparation procedure and applicable work instruction sheet which applicable for related Purchase order.
Review Subcontractor Painting Procedure
Performing Inspection of receiving materials
Witness and Conduct painting procedure tests for blaster and painter qualification tests.
Witness and conduct holiday test performed by NDT sub-contractor after painting complete
July.2003 - Dec 2006
PT. RIFANSI DAEKYUNG CONSORTIUM
Position: QA/QC Engineer
Client : Chevron Pacific Indonesia
Projects:
Installation of Pipe Line Project consisted oil pipe line from well head up to gathering stations and installation steam pipe line from steam injector well up to steam station
GI and Non GI Project, Steam Distribution Pipe Line Improvement Project
Coating & Insulation GFW Tank at Central Gathering Station – 5
Coating Heat Exchanger at all central gathering station
General Responsibilities:
Performing Inspection of Materials (plate, Pipe, Fitting, and other free issued material)
Conduct Fit up, Visual, Dimensional inspection & Monitoring of Welding parameters during welding.
To monitor the construction process from all aspects to ensure performance meets job quality and design requirements in accordance with Company procedures, specifications, code and international standards.
Preparing the NDT request and co-ordination with NDT sub contractors.
Witness and Conduct painting procedure tests for blaster and painter qualification tests.
Witness and conduct holiday test performed by NDT sub-contractor after painting complete
REFERENCES
Bernie Bridger
Formerly Business Development Manager Intertek Industry Services Japan
Now Business Development Manager Japan Inspection Co. Ltd
Phone : +81 3-3537-3667
Hilmi Ahmad
Inspection Coordinator Intertek Industry Services Singapore
Phone : +659*******
Contact this candidate