Power Plant Operations

ABASIAMA BENNETT JAMES

**** ********* ***** *** ***, LANHAM, MARYLAND 20770

Ph: 240**********

***************@*****.***

Summary

PROFILE:I am anexperienced operations technician with over 9 years' experience inengineering practice/ operations of the Niger delta power holdingcompany (NDPHC). My areas of emphasis include operations of the fuelgas station, water treatment plant, diesel oil station, aircompressor, black start diesel generators (BSDG), emergency dieselgenerators (EDG), medium voltage and low voltage switchgearoperations and supervising daily shift operations of 4- no's GEframe 9E gas turbines. In addition, I am also responsible formanaging plant equipment such as water bath heaters, ESD valves,filter separators, burners, pumps, absorbers, cooling fans,condensers, filters and with particular emphasis on preventingconditions that might endanger self or others and the equipmentitselfFor the past 9 years now, Iserved as a control room operator in Ibom Power Company, operatingFrame 9E and 6B GE gas turbine under GE in Nigeria, I alsohave the privilege of working with PIC-Marubeni Group INC in OgorodeElectricity Generation Co. Ltd, as a control room operator. I also work as a shift lead in Ihovbor Power generation Station, Benin City, Nigeria for about 5 years. I was among the operation commission team that common and started up Ibom power plant, Ogorede Power plant and Ihovbor powerplant

Skills

Public Safety and Security

Active Listening

Critical Thinking

Customer and Personal Service Monitoring

Reading Comprehension Operation Monitoring

Judgment and Decision Making Time Management

English Language Computers and Electronics

Coordination Operation and Control

Negotiation Communications and Media

Production and Processing Operations Analysis

Engineering and Technology Installation

Technology Design Equipment Maintenance

Equipment Selection

Experience

Jan 2011-Jan 2013

shift lead turbin operator Mar 2013-Feb 2018 Ihovbor Generation Power Plant - Benin City, ED

To supervises everyone in the shift and reports to the O&M lead

To ensures all logs are properly taken and information documented To makes immediate technical decisions such as what unit to shut down or bring up and if a unit should be shut down

To Ensures permits and isolations are properly done and safety adhered To Supervises periodic run of equipment.

Use computers for various applications, such as database management or word processing.

Create, maintain, and enter information into databases.

Maintain scheduling and event calendars.

Establish work procedures or schedules and keep track of the daily work of clerical staff.

To Supervises running of all plant equipment, water treatment plant and gas stations plant included

Control Room Operator

PIC-Marubeni Group INC.Ogorode Electricity Generation Co. Ltd

Operation & Maintenance of:, Air Compressors, Monitoring/Control of Gas Turbine and GeneratorEmployer National Integrated Power Project(Lot-6, Sapele) Parameters using Distributed Control System (DCS) & Other Control Panels, HVAC Switching & system controls, SCADA System, Gas Metering System, Trouble shooting of RTDs & Thermocouples, Trouble Shooting of Gas Temperature Heater, Control Valves, Emergency Shutdown Valve, Pressure Regulators, Monitoring Normal & Abnormal condition of Combustion Turbine, Piping & Instrumentation Diagram, Inspection/ Running of Positive Displacement Pump, Centrifugal Pump, Rotary Pump Through Local Control Panel, Valves Line up checks, of: P& ID of Diesel Oil System, DM Water Distributed System, Fire Fighting System, Compressed Air System, Fuel Gas System, Industrial waste Water System- Till Date2013 - Till Date.

Respond to emergencies, such as transformer or transmission line failures, and route current around affected areas.

Prepare switching orders that will isolate work areas without causing power outages, referring to drawings of power systems.

Control, monitor, or operate equipment that regulates or distributes electricity or steam, using data obtained from instruments or computers. Coordinate with engineers, planners, field personnel, or other utility workers to provide information such as clearances, switching orders, or distribution process changes.

Direct personnel engaged in controlling or operating distribution equipment or machinery, such as instructing control room operators to start boilers or generators.

Distribute or regulate the flow of power between entities, such as generating stations, substations, distribution lines, or users, keeping track of the status of circuits or connections.

Jan 2008-Jan 2009

Monitor and record switchboard or control board readings to ensure that electrical or steam distribution equipment is operating properly.

Track conditions that could affect power needs, such as changes in the weather, and adjust equipment to meet any anticipated changes.

Manipulate controls to adjust or activate power distribution equipment or machines.

Control Room Operator Jan 2009-Jan 2011 Ibom Power Company Power Plant Simple Cycle Gas Turbine

Operating, Controlling and Monitoring of Gas Balance of Plant and Other Equipment.

Employer Ibom Power Company

Project Power Plant Site Ikot Abasi, Akwa Ibom State, Nigeria Position Attaché / Training Duties Transformer Testing, Fault Detection, Earth Fault Testing, Resistance Test, Installation of Insulators and Cross bars Employer.

Accomplishments

PROFILE: I am an experienced operations technician with over 9 years' experience in engineering practice/operations in power generation

My areas of emphasis include operations of the fuel gas station, water treatment plant, diesel oil station, air compressor, black start diesel generators (BSDG), emergency diesel generators (EDG), medium voltage and low voltage switchgear operations and supervising daily shift operations of 4- no's GE frame 9E gas turbines.

In addition, I am also responsible for managing plant equipment such as water bath heaters, ESD valves, filter separators, burners, pumps, absorbers, cooling fans, condensers, filters and with particular emphasis on preventing conditions that might endanger self or others and the equipment itself For the past 9 years now, i served as a control room operator in Ibom Power Company, operating Frame 9E and 6B GE gas turbine in Ikot Abasi Akwa Ibom state, i also have the privilege of working with PIC-Marubeni Group INC in Ogorode Electricity Generation Co.Ltd, as a control room operator.

I have been working as a shift lead Ihovbor Power Station, Benin City, Edo State for pass 4 years. I was among the operation commission team that started up Ibom power plant, Ogorede Power plant and Ihovbor power plant .

My job description is not limited to Operation & Maintenance of:, Air Compressors, Monitoring/Control of Gas Turbine and Generator Parameters using Distributed Control System (DCS) & Other Control Panels, HVAC Switching & system controls, SCADA System, Gas Metering System, Trouble shooting of RTDs & Thermocouples, Trouble Shooting of Gas Temperature Heater, Control Valves, Emergency Shutdown Valve, Pressure Regulators, Monitoring Normal & Abnormal condition of Combustion Turbine, Piping & Instrumentation Diagram, Inspection/ Running of Positive Displacement Pump, Centrifugal Pump, Rotary Pump Through Local Control Panel, Valves Line up checks, of: P& ID of Diesel Oil System, DM Water Distributed System,

Fire Fighting System, Compressed Air System, Fuel Gas System, Industrial waste Water System Operation & Maintenance of:, Air Compressors, Monitoring/Control of Gas Turbine and Generator Parameters using Distributed Control System (DCS) & Other Control Panels, HVAC Switching & system controls, SCADA System, Gas Metering System, Trouble shooting of RTDs & Thermocouples, Trouble Shooting of Gas Temperature Heater, Control Valves, Emergency Shutdown Valve, Pressure Regulators, Monitoring Normal

&Abnormal condition of Combustion Turbine, Piping & Instrumentation Diagram, Inspection/ Running of Positive Displacement Pump, Centrifugal Pump, Rotary Pump Through Local Control Panel, Valves Line up checks, of: P& ID of Diesel Oil System, DM Water Distributed System, Fire Fighting System, Compressed Air System, Fuel Gas System, Industrial waste Water System. etc. Training Acquired: - Red Cross Society 2010 Courses: - Basic First Aid. Primitives /Traditional First Aid.

Modern / Scientific First Aid. Incidents Management. Management of unconsciousness. Minor Injuries.

Management of Blood Loss. Burns and Scalds.

Spinal Injuries.

Crush Injuries and Chocking.

Training Acquired: - State Fire Service training 2010

Courses: - Fire Prevention. Fire Triangle.

Classes of Fire.

Heat Transfer and Fire. Fire Extinguishing.

Training Acquired: General Electric (GE) Gas Turbine Operation and

Maintenance Technician (OMT) Courses: - POWER PLANT BASICS CURRICULUM.

Valves.

Valves Actuators.

Centrifugal and Positive Displacement Pump. P&ID Symbols and Interpretations.

Heat Exchanger.

Combustion Turbine Theory Component. Normal and Abnormal Operation of Gas Turbine. Environmental Health and Safety.

Courses: - SITE SPECIFIC BALANCE OF PLANT. Raw Water Storage And Supply.

Raw Treatment Plant. Compress Air.

Demineralization Water Plant And Supply. Potable Water System.

Fire Water System.

Cooling Water System.

Fuel Gas System.

Sewage, Oily And Wash Waste system Courses: - GAS TURBINE FUNDAMENTALS.

Gas Turbine Operating Principals.

Major, Minor Components Operations And Maintenance.

Introduction of Controls System.

Fundamental Of Generator.

Generator Operation and Maintenance.

Training Acquired: NATIONAL CONTROL CENTER OSOGBO (PHCN) 2010

Courses: - POWER SYSTEM OPERATIONS.

Power system component.

Power system operations.

The Interconnected Grid system.

Communication.

Operational Procedure on Emergency Action.

Restoration After Collapse.

Restoration Strategy.

Outage Planning.

Forced Outage MGT & report.

Standard protective code, Safety code and Application.

Principles and Philosophy of Relaying protection.

Grid Telecommunication.

Power system frequency control and Generation Dispatch.

Voltage control and Var Dispatch.

Telephone Techniques.

Station Inspection.

Safety Rules and Regulations .

Education

Certificate in Desktop Publishing

Jan 2011

OTHER QUALIFICATION

Bachelor of Science

Sep 2009

University Of Benin - Benin City, ED

Electrical Electronic Engineering

Etinan L,G,A. Akwa Ibom StateNigeria West Africa Secondary School

Jan 2005

Certificate

Jan 2002

Etinan Institute

college

National Diploma : Electrical /Electronic Engineering

Interests

INTREST: Reading,Music,Studying Playing indoors games

Contact this candidate