Resume

Sign in

Safety Officer

Location:
Philippines
Posted:
April 03, 2018

Contact this candidate

Resume:

Curriculum Vitae

OBJECTIVE:

Continue working in the field of safety profession thus willingly to share my experience in contributing HSE Goals and objectives in the projects.

HIGHLIGHTS OF QUALIFICATION:

6 total years of experience as a Safety Practitioner in the field of Construction and Infrastructure.

Strong leadership, management and motivational skills

Proficient on Risk Assessment, Job Hazard Analysis, Documentation and Recordkeeping

Proficient in Capacity, Headcount, Audit & Statistical Analysis, Project Management, Work Simplification, System Design; Process, Layout and Procedure Improvement; and Time Study

Proficient in MS Office Application such as Word, PowerPoint, Excel and Visual Basic for Application and technical.

Strong commitment to the goals of the project teams along with an energetic and upbeat attitude.

WORK EXPERIENCE:

Employer : IMCO Engineering & Construction Company W. L. L.

Messaieed, Doha Qatar

Designation : Safety Officer

Client : NPPQ-TCC/CCC

Project : Electrical EHV cable jointing, ELV cable termination, Installation of steel support

Inclusive Date : February 02 ‘2016 to April 29 2017

Duties and Responsibilities:

Complete daily reporting for project.

Coordinate with dispatcher to assign workers to construction sites.

Responsible for implementing and overseeing Company Site Specific Safety Plan

Be at the work site at all times when work is being performed to perform safety and occupational health management, surveillance, inspections, and safety enforcement.

Perform daily safety and health inspections and maintain a written log which includes area/ operation inspected, date of inspection, identified hazards, recommended corrective actions, estimated and actual dates of corrections. Co-ordination and provision of safety training and safety induction to all staff.

Assist to supervisor and foreman to conduct daily toolbox meeting concerning hazard and accident preventions.

Performing risk assessment of each of area company activity and making recommendation on actions to be taken to reduce risks.

Conduct weekly safety meetings for all workers.

Conduct monthly supervisory safety meetings and participate in monthly client safety meetings.

Responsible for primary documentation and reporting of any job site injuries for workers compensation.

Employer : IMCO Engineering & Construction Company W. L. L.

Messaieed, Doha Qatar

Designation : Safety Officer

Client : Sixco/FLSmidth

Project : Electrical and ELV Works for Secondary Substation, Primary Substation, Stacker and Conveyors Project

Inclusive Date : June 10 ‘2015 to January 30, 2016

Duties and Responsibilities:

Coordinate with the Project staff and subcontractors to plan, organize and direct activities concerned with the construction project.

Ensure all Electrical and ELV Works for Secondary Substation, Primary Substation, Stacker and Conveyors Project training is completed and safety programs are administered including regular safety inspections.

Review project objectives, policies and procedures and performance standards within the boundaries of company policy and contract specifications.

Perform duties as liaison with construction client, sub-contractors and other contacts to facilitate project objectives.

Maintain current project schedule and project completion documentation and communicate this information to the HSE Manager on a regular basis.

Complete daily reporting for project.

Coordinate with dispatcher to assign workers to construction sites.

Responsible for implementing and overseeing Company Site Specific Safety Plan

Develop, update, and maintain a Project-Specific Accident Prevention Plan (subject to client approval).

Be at the work site at all times when work is being performed to perform safety and occupational health management, surveillance, inspections, and safety enforcement.

Perform daily safety and health inspections and maintain a written log which includes area/ operation inspected, date of inspection, identified hazards, recommended corrective actions, estimated and actual dates of corrections.

Maintain a safety and health bulletin board that will include emergency contact information and the route to the nearest hospital and/ or emergency healthcare facility.

Maintain a safety and health deficiency tracking system that monitors outstanding deficiencies until resolution. Post a list of unresolved safety and health deficiencies on the safety bulletin board.

Ensure subcontractor compliance with safety and health requirements.

Conduct weekly safety meetings for all workers.

Conduct monthly supervisory safety meetings and participate in monthly client safety meetings.

Keep records of job personnel safety training.

Responsible for primary documentation and reporting of any job site injuries for workers compensation.

Employer : Sumisetsu Philippines Inc.

Designation : Health and Safety Officer

Project : Epson Precision Philippines Employees Welfare Expansion Project

Inclusive Date : November 8, 2013 to December 19, 2014

Duties and Responsibilities:

Ensure that all operating project are up to date with all Sumisetsu safety work regulation and rules

Audit various safety programs and real work requirements for compliance

Complete all required forms and documents for safety compliance

Ensuring that all non-routine and potentially hazardous routine jobs are carried out under Permit to Work System with associated complimentary certificates and Job Hazards Analysis (JHA).

Ensure that the company safety program is dully followed by the workers and duly inform at the construction site through Daily Toolbox Meeting before start the work.

Supervise and maintain inventory of safety equipment.

Leading the investigation of any accidents or incidents and making recommendation on modified procedures to avoid recurrences.

Dissemination monitoring and enforcing of safety policies and procedure.

Conducts incident/accident investigations, reports, records and evaluates, develops and review the company safety policies.

Conducted regular inspections of facilities, work areas, tools and equipment of the company and observing work methods and procedures of employees to determine unsafe working condition and procedures.

Strictly implemented the company safe system of work.

Continuously monitor workers for exposure to safety or health hazardous condition.

Reporting of all unsafe conditions and unsafe acts and provides counsel for safe procedures and requirements.

Co-ordination and provision of safety training and safety induction to all staff.

Assist to supervisor and foreman to conduct daily toolbox meeting concerning hazard and accident preventions.

Performing risk assessment of each of area company activity and making recommendation on actions to be taken to reduce risks.

Employer : Dreamwork Construction Inc.

Pasay City, Philippines

Designation : Safety Officer

Project : GSIS Building Renovation

Inclusive Date : January 06, 2013 to September 10, 2013

Duties and Responsibilities:

Strictly implemented the company safe system of work to the project.

Develop implement and monitor Occupational Safety & Health Policy, Program and Procedures.

Assist in complying with current health and safety legislation and/or regulations of all employees.

To increase health and safety awareness at all level within the organization.

Investigate and report all serious/critical personal injuries accident.

Respond to all employees’ safety concern.

Conduct safety inspection in the area.

HSE coordination with other sub-contractors.

Coordinate registration and removal of hazardous waste

To assume other duties as may be assigned.

Employer : Global Professional Services Agency

Doha Qatar

Designation : Safety Officer

Client : Qatar Aircraft Company

Project : Construction of Catering Building

Inclusive Date : October 12, 2012 to November 08, 2012

Duties and Responsibilities:

Ensure that the company safety program is duly followed by the workers and duly inform at the construction site through Daily Toolbox Meeting before to start the work.

Investigated all incidents and near misses and provide immediate follow-up with corrective action

Ensure the availability of permit to work prior to start of any work.

Ensure followed Health & Safety and Environment related documentation to ensure compliance with established standards.

Provides safety signage at all places in the construction site.

Reporting of all unsafe condition and unsafe acts.

Planned and directed regular program of safety inspection.

Inspected equipment, structures and work progress for compliance with applicable health and safety standards and specification.

Ensure that the worker wear appropriate PPE’s depending on the nature of work being done.

Ensure preparedness of all workers of emergency procedures and conduct fire drills.

Employer : SEPAM

Doha Qatar

Designation : Asst.Safety Officer

Client : BECHTEL International

Project : NDIA CP-19

Inclusive Date : January 03, 2011 to August 10, 2012

Duties and Responsibilities:

Conduct daily monitoring of project site’s if HSE policies and work procedures are properly implemented by worksite supervisors.

Conduct Safety Orientation to all newly hired workers.

Prepares Job Hazard Analysis (JHA) and distributes recommendations to Construction Site Managers for their proper implementation at the job site.

Assist the Supervisors/Foreman in conducting daily toolbox talks and weekly general Safety Meeting with all workers together with the concerned site Supervisors.

Assist the Safety Engineer in gathering information related to accident/incident investigations.

Ensure that all Safety and First Aid equipments are available on Site when necessary.

Ensure the issuance and use of appropriate personal protective equipments on Site.

Inspect worksite daily and report unsafe conditions to worksite Supervisors and Foreman for rectification.

Conducts HSE Weekly Walk through Inspection with our Site Manager.

Attend Weekly Safety Coordination Meeting and Monthly Safety Committee Meeting.

Conducts inspection of the company’s Fire Fighting Equipment at the project site’s and offices.

Conduct inspection of Welfare Facilities in the job site and living quarters of the workers at the project camp.

Interact with client and company representative.

Employer : Hyundai Engineering

Doha Qatar

Designation : Industrial Electrician

Client : QAFCO

Inclusive Date : September 10, 2010 to December 26, 2011

Duties and Responsibilities:

Laying out electrical conduit, cable pulling and installation of electrical fixtures and receptacles.

Installation and laying out of grounding wires and grounding rods.

installation of cable trays and cable tray brackets; and

Installation of the following: switch gear, motor control centers, lighting panels.

installation of conduits

observe safety rules and procedure.

Installation and termination of main feeder of 2500 KVA generator synchronize panel, to sub-main distribution panel and to distribution panel

conduct high-pot and meager test of all high voltage rated cables before termination

Installation of street light, security light, sports facilities lighting.

TRAINING & SEMINARS:

OSHA 30 Hours Construction Industry

November 14 – 16, 2015

Thru OHSEC Consultancy

IOSH Managing Safely V.4

October 9 – 23, 2015

Thru OHSEC Consultancy

Diploma in Fire and safety Engineering Course

August 1, 2014 – February 1, 2015

Thru OHSEC Consultancy

Basic Principle and Practice of Risk Assessment & Control

August 31, 2012

Topics: Safe Work Method Statement, Hazard Identification, Legal Requirement of Risk Assessment, Principle of Risk Assessment including Hazards, Risk and Control Measures, The Five Steps of Risk Assessment, Hierarchy of Control Measures, Risk Assessment Review and Recordkeeping, Practical Exercises on Risk Assessment

Thru Philippine Association of Safety Engineers – Qatar

Commissioning Safety in Oil and Gas Industry

July 22, 2011

Topics: Piping Safety, Simultaneous Operation (SIMOPS), Introduction to Process Plant Start Up and Commissioning Safety and Transition to Pre Mechanical Completion (PMC)

Thru Philippine Association of Safety Engineers – Qatar

Industrial Hygiene for Non Hygienist

July 15, 2011

Topics: Understanding to Industrial Hygiene for Non Hygienist, Noise and Hearing Conservation, Hand & Arm Vibration and Construction Ergonomics

Thru Philippine Association of Safety Engineers – Qatar

HSE Essential to Oil and Gas Industry

July 8, 2011

Topics: Introduction to Safety In Oil & Gas, Permit To Work System(PTW), Vessel Entry Confined Space, Painting and Sandblasting Safety, Hot Topping &Plugging, Safety in Hydro & Pneumatic Testing, Hydrogen Sulfide/Breathing Apparatus (H2S/BA), NDT/Radiography Test Safety

Thru Philippine Association of Safety Engineers – Qatar

Setting Up Safety in the Workplace

June 24, 2011

Topics: Introduction to Setting Up Safety in a Work place, Write a Policy that demonstrate your program, Toolbox Talks, Health & Safety Policy Program, Identifying and Control Hazards and Emergency, Identify people and resources required to deal with Emergencies, Prepare a Statement of Responsibilities, Schedule of Inspection, Recordkeeping and Safety Statistic Reporting

Thru Philippine Association of Safety Engineers – Qatar

Highway Construction Work Zone & Traffic Control Hazards

June17, 2011

Topics: Work Zone Traffic Control, Safe Operation and Internal Traffic Control in the Work Space, Heavy Equipment in Road Construction Work Zone Safety, Overhead Power lines and Underground Utilities, Power and Pneumatic Tools in Road Construction Work Zone Safety

Thru Philippine Association of Safety Engineers – Qatar

Identifying and Controlling Hazard (Hazard Management Course)

May 27, 2011

Topics: Hazard Management Basic Concept, Session I (Hazards, Incident & Near-Misses), Session II (Cost of Accident and Hazards S.H.E.D), Session III (Unsafe Acts/Unsafe Conditions & Controls), Session IV (ABC of Behavior, Communication & Site Photo Identification)

Thru Philippine Association of Safety Engineers – Qatar

Safety Officer Refresher Course

May 20, 2011

Topics: Advance Electrical Safety, Control of Hazardous Energy Lock-Out/ Tag-Out (LOTO), Construction Environmental Awareness, OSH Leadership and Behavioral Base Safety (BBS)

Thru Philippine Association of Safety Engineers – Qatar

Basic Occupational Safety & Health in Construction Industry

May 13, 2011

Topics: Signage’s Barricading, Mobile Plant Equipment & Machinery, Job Hazard Analysis (JHA), Site Safety Programming, Incident Report & Investigation and Banksman, Lifting & Rigging

Thru Philippine Association of Safety Engineers – Qatar

Basic Occupational Safety & Health in Construction Industry

April 29, 2011

Topics: Basic Electrical Safety, Tool-Hand & Power, Confined Space Entry, Manual Material Handling, Welding & Cutting Safety, Fire Safety & Prevention

Thru Philippine Association of Safety Engineers – Qatar

Basic Occupational Safety & Health in Construction Industry

April 22, 2011

Topics: Introduction to OSHA, Fall Protection and Prevention, Scaffolding and Ladder Safety, Excavation Safety, Personal Protective Equipment

Thru Philippine Association of Safety Engineers – Qatar

PERSONAL PROFILE:

Citizenship : Filipino

Civil status : Single

Date of Birth : October 17, 1981

Height : 5’6

Weight : 61 kls.

Religion : Roman Catholic

Mobile No : 093********

SAFETY ORGANIZATION MEMBER:

PHILIPPINE ASSOCIATION OF SAFETY ENGINEERS (PHASE)

April 08, 2011 till present

PHASE ID Nos. 2011-2452

SPECIAL SKILLS

Computer literate especially on MS WORD & EXCEL.

Can operate both manual & electrical office machine.

Possess good communication and writing skills.

Reliable, hardworking and trustworthy

CHARACTER REFERENCE UPON REQUEST

I hereby declare that the above information are true and correct to the best of my knowledge and belief.

Mariano B. Bernales Jr.



Contact this candidate