Sign in

Engineer Test

Singapore, 159049, Singapore
January 06, 2018

Contact this candidate


Contact No: 82441765

India:0091 897*******.

ACADEMIC QUALIFICATIONS :Bachelor of Mechanical Engineering

Bharathidasan University, Trichy, India-2002.

Welding inspection certification: CSWIP 3.1 renewed -Expiry 07-2021

NDT Certificate: Level 2 of UT, RI, VT, MPI, PT. Renewed on Expiry 07-2021

Computer knowledge & skill: Diploma in MS office, Unigraphics, AutoCAD 2D, 3D.

Company name and work summary for total working experience: 15 Years.

1)(SembCorp Marine Integrated yard) SembCorp Offshore Platforms Pte Ltd. Sembawang, Singapore.(01/02/17 to till now)

Project: North Sea projects - Culzean filed development projects .Client -MAERSK OIL-UK, Class –DNV GL, NORSOK Standard.

Offshore platform –Modules 1) Well Head Platform (WHP), 2) Central processing Flare (CPF),3) Gas compressor Module.

CODE: ASME 31.3, DNV. ASME IX. Norsok Standard.ISO-9001, ASME SEC V, 9.

Position: QA/QC Welding Inspector.


Super Duplex SS

Duplex SS




UNS S32760, S32750

UNS S31803

UNS S31254


A333 GR6


Review drawing, Client specification, DNV rule, P&ID, ISO drawing, quality plan and Procedure, ITP and check lists, Test pack.

Inspection material traceability as per Mill cert. and fit up joint configuration, documentation work reports as per drawing, client spec. ITP.

Monitoring, record/ review welding parameters as per WPS approved.

Review welder performance as per clients, code requirements by RT reports, material in WPS. Monitor witness and review NDT Coordinate as per drawing, projects spec. ITP.

Visual inspection, borescope inspection to pipe internal root heat- tint, documentation of reports and records. Meets requirements of Client and class DNV GL. As per client spec. ITP,ASME B31.3

Inspection/witnessing for Pre-Line-walk to punch list open/close as per drawing, P&ID, Test pack ITR.

Inspection/witness to leak testing flushing test, Hydro testing, AIR testing N2, He as per ASME B31.3.Review pressure/temperature record chart. As per procedure spec., Test pack ITR.

Inspection/Monitoring chemical cleaning pickling, neutralization and passivation, hot oil hot oil flushing as per P&ID, Test pack.Norsok L-004 Specification procedure.

Inspection/witness internal reinstatements punch list open/close, Final reinstatements with clients and DNV as per drawing, P&ID, Test pack ITR.

DAC walk for subsystem line/valve tag inspection to hand over to commissioning team, Client as per P&ID, Test pack.

Inspection/witness flange management checking gasket, spade, spacer, torqueing values and tolerances as per ASME B16.5, B16.20, and B31.3.

Inspection/witness pressure regulator, orifice, flow meter, globe, ball, DBB valves, and Pressure safety valves as per client spec.

Inspect/review PWHT record chart.

To prepare Punch list and close out of end products of hand over projects.

Documents preparation WQT, PQR, WPS, welder performance record, welding WPS

Monitoring record, Material verification Report, Fit up report, Visual inspection report,

Pipe weld summary report, Material inspection traceability summary report, Pipe spool

Release note.

Documents preparation quality action issue record,NCR, Punch list

2)Surbana Jurong Private Limited.

April 2015 to July 2016.

Projects: Mount Faber piping utility water and C7 utility water piping carbon steel

Owner: PUB Government Corporation, Projects Mount Faber &C7.

Piping material

CS – BSEN 10025 S275JR:2004

Dia: 700 &1200 mm & 2200 mm


AWS D 1.1


To final Inspection, Ndt, test package preparation, hydro testing, and insulation for the contractor welding pipe line as per P&ID, ISO AFC drawing, specification & code.

Review ITP, testing procedure, Fit up & welding procedure.

Review/approve contractor welding fit up, final visual inspection, NDT testing and hydro testing repots.

Review drawings, Owner PUB specification, witness contractor PQR, review WPS.

Witness the WQT; review the Ndt report, certification, welder pass.

Inspection of pipe material, insulation coating, and review the mill certificate, review MRIR report.

Inspection/witness CCTV inspection recording video footage review.

Witness the piping third party inspection and coordination Ndt, review records.

Review and approve the inspection reports, testing reports

Witness gas testing, air testing and hydro testing. Review/ approve the reports.

Inspection/witness final punch list open/close, hand over projects and documents.

3)Rotary Engineering Limited. Jurong Island, Singapore. From 2012 to until March 2015.

Project: Me5 piping& structure, C3 metering skid piping, Plant maintenance piping.

Owner - Evonik,

Position: QA/QC Inspector- Piping & structure.

Codes: ASME –IX, ASME B 31.3, AWS D1.1, API.ASME SEC V, 9.

Piping material

SS - 304/304L, 316/316L, 316Ti, 904L,316 Ti,Al,317L,321L, Titanium, Zirconium, Al

CS –A 106 Gr B,A333 & Alloy -16Mo3

Structure Material

S235 JN,JR,J0,S275J0,JR,S355 JR,J0


To review/preparation of Quality plan, ITP, check list, testing procedure, test package.

Review AFC drawing of Isometric, P&ID, PFD drawing and bill of materials.

Review Piping specifications/codes,ITP, check list

Inspection of material as per projects spec/drawing, witness material charpy impact test, tensile test.

Monitor/witness the required welding consumables controls/records by heating procedure, issue/receive. Review reports daily process control.

Controlling workshop fabrication and site work activities of use of materials, wps, welder qualification/performance, and consumables as per AFC drawing, specification/codes.

Conduct, inspection WPQR / destructive bent, tensile, charpy. Macro test, PWHT, preparation of WPS, WQT for client approval, and welder mock up test as per required ASME IX, AWS D1.1.

Conduct final visual inspection, Punch list, coordinate Ndt & Film interpretation. PMI, Ferrite test as per client spec. code ASME 31.3 .ASME SEC V .9

Rise up RFI to client final visual inspection, hydro testing Monitoring welding process during the welder doing as per the WPS and welder performance as per code /company requirement.

Witness/review NDT, PMI & Ferrite testing, review procedure and reports.

Documents preparation is Welding log sheet, fit up & visual inspection report, welder performance record.

Monitoring preheat, Interpass temperature and PWHT as per WPS.

Test pack preparation and witnessing hydro test, air blow & N2 gas test.

Maintain all the reports and records with authorization approval and hand over the documents in proper channel.

Project: Rehabilitation of floating roof Tank

Position: Lead QA/QC Supervisor

Owner: ExxonMobil Asia Pacific Pte ltd.

Code: API650, API 653.

Document preparations are quality plan, testing procedure, ITP, test package

Inspect/prepare document of welding procedure qualification record (WPQR), WPS preparation for 516 GR70, A106 Gr B. ABS Gr A, 283 Gr C and Cortan steel pipe.

Inspect/prepare document of Welder qualification test for the PRiMOS and ASME Sec IX.

Inspect /Prepare document of bottom plate, annular plate, shell and pontoon fabrication welding inspection log sheet, dimensional and diagonal control report, nozzle dimension checking report.

Inspect / controlling welding consumable control procedure, monitoring storage.

Inspect/witness the Ndt inspection.

Review drawings weld map, welding symbol, dimension, and weld geometry designs, testing methods, fittings, paints details, material grade, process and specification, Support jig &fixture, Drawings are AFC, P&ID, ISO, PEFS, FEFS and General specification & assemble drawings and layout drawing.

Review with prepare quality plan, ITP, WPS, PQR, WQT, approved NDT procedures, review approved specification procedures relevant to codes and standards.

4). Nakilat-Keppel offshore and marine ltd. Qatar.

Duration: March 2010 to march 2012.

Designation: QA/QC Engineer – structural, piping/mechanical.


A. Dry Dock gate 1&2 B. Load out/ Recovery Barge

Repair ships. A) LPG, LNG ships Offshore Rigs: Doha, Zikreet.

Code: IACS, DNV, LR, ABS, API shipbuilding and repair standards. ASME 31.3 AWS D1.1, ISO-9001. ASME SEC V, 9.

Prepare ITP, test package, inspection schedule RFI, reports liaise with class and client representative.

Review AFC, ISO, shop fabrication drawing and site assembly drawing for dimensions, weld geometry, weld symbols, joint members, alignment, welding process and specification.

Inspect Consumables controlling process, storage and essential variables trade, prepare report for electrode, and wire inspection with batch no., brands, and oven calibration certificates. And inspect/witness the consumables issue and return records. Check quiver temperature control, welding m/c calibration.

Responsibility for material inspection to detect surface defects, lamination and

Thickness by UT test, heat number, plate number, plate thick, project color code.

Inspect, testing/prepare documents, MRIR.

Preparation/Monitoring and review WPS, WQT, WPQR test report and verify mill certificate. Review material certificate for chemical composition, tensile, yield strength, heat number, Impact ‘V’ notch. Class of approval.

Welding inspection for the panel, panel assembly, block assembly and erection as per Drawing, specification, codes, standards and limits.

Responsibility for final visual inspection for structural and pipe welding to evaluate imperfections and marking defects as customer required specification and requested class codes. To follow inspection procedures as per approved ITP check points. For preparation of RFI (request for final class inspection or owner representatives) by using QRM (Quality record management) or MS office.

Responsibility to monitor welding preparation, welding process and welder certificate according to the WPS. Monitoring preheat, Interpass temperature and PWHT as per WPS, WPQR.

To prepare 2D&3D drawings, punch list, NCR to meet the standard quality requirements.

Monitoring welding process and welder performance as per wps. Controlling welding consumables as WPS for consumable temperature control process before and after welding.

Monitor interprets RT, UT, and MT & PT test results. Review. Monitor the repair weld process, inspect repair weldment and test reports.

Prepare documents and witness the final inspection report, maintain control records of consumables, welder qualification and inspection test report.

Witness the Hydro test, vacuum test and air test .prepare and prepare documents/witness the report.

Review NDT test report, Dimensional Control report after the panel, block assembly, and comportment close out.



Duration: November 2007 to November 2008.

Position: QC Engineer structural /piping.

Projects: 1.Arahura cruise 2. Alaska cruise 3. Jascon25. 4. Jascon29 5.Sunrise 6.

BUE UH-108,109 barges

6). A.G.E.S.Automotive (p) Ltd, Chennai, India.

Duration: November 2004 to October 2007.

Position: QC Engineer

JOB PROFILE: welding inspection for exterior and interior steel body frames and

Design for engine parts.


Duration: March 2003 to October 2004.

QC Engineer for welding of control panel, electrical tower fabrication.


Name : S.Muruganandham

Date of Birth :12/07/1980

Nationality :Indian

Race :Indian

Gender :Male

Marital Status: Married

Pass type : S Pass

Fin no : G7579830Q

Basic salary+OT: S$3600.

Contact this candidate