Resume

Sign in

senior structural bridge engineer

Location:
Kuwait City, Kuwait
Salary:
0000
Posted:
January 05, 2018

Contact this candidate

KAMEL A. KAMEL

Senior Structural / Bridge Engineer

ac3w03@r.postjobfree.com

TELEPHONE: 009********** - 002***********

BORN: Egypt

NATIONALITY (IES): Egyptian

LANGUAGES: Arabic, English

EDUCATION: Fundamentals of Engineering (NCESS) 28/11/2017 BSc Civil Engineering, Cairo University, Egypt, 2000 MEMBERSHIPS: Egyptian Syndicate of Engineers

SUMMARY OF

CAPABILITIES: Senior Structural / Bridge Engineer with local and international experiences are in bridges, tunnels and residential buildings within multinational environment. Experience in the field of design structural engineering (bridges, tunnels and residential building) more than 17 years includes all activities, lead a team of engineers, planning, cost estimations, price breaking down, subcontractors evaluations, etc. PROFESSIONAL

EXPERIENCE:

4/2016 to persistent Dar Al-Handasah Consultants (Shair and Partners) Kuwait Area Senior Bridge Engineer on the SHEIKH JABER Al-AHMAD Al-SABAH CAUSEWAY PROJECT DOHA LINKE

The sheikh Jabber Al Ahmed al Sabah causeway project comprises the design and construction of a causeway Link across Sulaibikhat bay between Shuwaikh port in Kuwait city and Doha peninsula Offshore marine bridge section 7.7 Km

Approach Bridge west – Main Bridge – Approach Bridge East Responsibilities

1-Check contractor’s shop drawings, method statements and calculation sheet for formwork.

2-Supervise, coordinates and reviews the work of Section Engineer & Assistant Section Engineers.

3-Prepare inspection check lists for work items and perform acceptance inspections for completed works and lead assent section engineer on site

4- Share for Prepare monthly report reports and Prepare technical reports.

5-Review engineering calculations, analysis, and design,

6-Coaching and mentoring technical staff.

4/2015 to 2/2016 PARSONS INTERNATIONAL LIMITED

Senior Bridge/ structural Engineer on the group 9- project 28 Consists of three separate projects involving upgrading roads and intersections in the most congested parts of Doha, Qatar. The three projects within this package will include the construction of 33 km of roads and 29 junction improvements Project 28:

Structures:

- A Ring road tunnel. - B Ring road tunnel.

- C Ring road tunnel. -Ahmed Bin Ali tunnel

KAMEL A. KAMEL Page 2

-Mohmed Bin thani tunnel - Al Istqlal underpass

Responsibilities

Lead the Project team in structural analysis, design, evaluation and preparation of calculation and drawings using AASHTO LRFD method and B.S. code.

Develop structural details, plans and specifications

Lead the Project from initial concept through the planning processes to implementation.

Prepare standard documents, such as technical specifications, in accordance with applicable design codes in Egypt, Kuwait, Saudi Arabia,Algeria and Qatar which are usually based on AASHTO standards, AASHTO LRFD and B.S. code

Supervise, coordinates and reviews the work of Section Engineer & Assistant Section Engineers.

Supervise the construction of temporary bridges.

Coordinate with the contractor for the transportation of bridge girders from Pre-cast yard to the construction site.

Prepare inspection check lists for work items and perform acceptance inspections for completed works

Liaise with relevant authorities regarding the quality of work and final inspection

Ensure that safety measures are taken on site

Check contractor’s shop drawings and method statements 6/2014 to 4/2015 Dar Al-Handasah Consultants (Shair and Partners) Algeria Senior Bridge/ Structural Engineer on the Constantine viaduct crossing over the river transrhumel,Constantine, Algeria

The bridge structures feature

- Main Bridge including a cable- cable-stayed bridge and approach spans

- South Access Bridges (east and west)

- Ramp Bridge South - Ramp Bridges North A to D

Responsibilities

Problem solving

Ensuring that all designs are up to high standards and signed off

Hands on design and analysis

Working closely with clients through continual liaison from conception to completion.

Performing engineering calculations, analysis, and design,

Coaching and mentoring technical staff.

Check contractor’s shop drawings, method statements and calculation sheet for formwork.

Supervise, coordinates and reviews the work of Section Engineer & Assistant Section Engineers.

Prepare inspection check lists for work items and perform acceptance inspections for completed works and lead assent section engineer on site. KAMEL A. KAMEL Page 3

9/2012 to 5/2013 Dar Al-Handasah Consultants (Shair and Partners) saudi arabia Senior Bridge/ Structural Engineer of Haramain High Speed Rail (HHR), Haramain High Speed Rail (HHR), Saudi Arabia. Design review, and project management for a 450 km long electrified rail line from Makkah to Madinah via Jeddah with a commercial operating speed of 300 km/h, and including one cut-and-cover tunnel, 43 rail bridges and 15 wadi bridges (post-tensioned box girders), 2 rail underpasses, 25 vehicular overpasses and 33 vehicular underpasses, 13 camel crossings, drainage system, stations, depots and various roadworks.

Responsibilities

Check contractor’s shop drawings, method statements and calculation sheet for formwork.

Supervise, coordinates and reviews the work of Section Engineer & Assistant Section Engineers.

Prepare inspection check lists for work items and perform acceptance inspections for completed works and lead assent section engineer on site

Share for Prepare monthly report reports

Review engineering calculations, analysis, and design,

Coaching and mentoring technical staff.

2006 to 9/2012 and 6/2013to 6/2014

With Arab Consulting Engineers (Moharam-Bakhoum), Senior Bridge Engineer on the following projects:

- Full structure design and detailing for the project of Bani Mazar Bridge (Egypt). The Project Consists of Three Main Bridges and Two Tunnels. The Nile Bridge consists of (10x40 meters) post-tensioned box girder plus (75+130+75) pre-stressed box girder with cantilever carriage construction method. The Desert Bridge consists of (6x30 meters) Reinforced Box Girders plus on Composite bay. The Railway Bridge consists of (30x40 meters) post- tensioned box girder. Responsibility, design the bridges and prepare the tender documents based Egyptian Code

- Full structure design and detailing for the project of Benha Bridge (Egypt). The Project Consists of Three Main Bridges and Three Tunnels. The Nile Bridge consists of (10x42.5 meters) post-tensioned Box Girder Plus (75+130+75) Prestressed Box Girder with Span by Span Construction Method. Responsibility, Design the Bridges and Prepare the Tender Documents Based on Egyptian code.

- Design Some Bridges for The Municpalties of Jeddah (K.S.A). The Project consists of Seven Bridges in Jeddah, Saudi Arabia: Wadi Wabah, Wadi Ghran, Wadi Shwan, Wadi Rabgha, Wadi Abwaa, Wadi Thtiban, Wadi Adam all of them post-tensioned concrete girders. Responsibility, Design the bridges and prepare the tender documents.

- Construction of Bridges for King Abdulaziz Road With Ismel Abu Dowood Road Intersection Bridges (K.S.A). The structure Comprises of Ten Spans, Seven of them are 25 m Reinforced Concrete Box Girder, Three Spans are Continuous Prestressed Box Girder 45mx80mx45m Between Piers and Abutments Centrelines, The Left Ramp Reinforced Concrete Slab Type, Providing an Overall Length of 436 m Between Centrelines of Abutments, The Abutments and Piers are in-situ Reinforced Concrete Supported on Pile Cap Rested on piles. The Bridge is Constructed over the Main Rain Water Drainage Culvert, Extreme Care should Be KAMEL A. KAMEL Page 4

Taken to Safeguard it During Constructions. Contractor Should Verify the Location and According the Design. Responsibility, Design the bridge and prepare the tender documents Based on (AASHTO) and M.O.T

- Massra Pedestrian Bridge (steel Bridge). The project comprises of Two adjacent span 25m with width is 6.5m, That is Crossing Salh Selam street, the main beam is Arch truss System, it use us supported Steel Flooring system With bracing. Responsibility, Design the bridge and prepare the Tender Documents Based on Egyptian code.

- Azmu Bridge (Bascul bridge). The Project Comprises Detailed Geometrical and Structural Design of Five Span Composite Beams and Orthotropi Girders of Span 20m, 25m The Foundation are pile cap rested on piles. Responsibility, Design the bridge and prepare the Tender Documents Based on Egyptian Code and British standard for steel, concrete and composite bridges BS5400.

- Buna BRIDGE (Swing Bridge). This Extension is of Length 27Ometre-Elevated Roads it Consists of Swing Bridge (Truss Bridge) and Prestressed Beams Girder of span 30m The Foundation are Pile cap Rested on Piles ranging form. Responsibility, a Team Leader and Design Reviewer

- Bridge Intersection For El Madiah Road With Halima El Sadiaa Street Inersection for El Madinah Road. The Bridge Comprises Three Spans 3x30 m With Total Depth 2.00 m including thickness of slab - The deck will be constructed using pre-cast, post-tensioning beams (I girder) and in-situ reinforced concrete deck slab - The abutment and piers are diaphragm walls to facilities the construction on Madinah road. Responsibility, a Team Leader and Design Reviewer.

- Saft El-Laban Corridor. The Project Comprises Detailed Design and Engineering Works for Double Level Highway Bridge (4000 meters). The bridge Deck consists of reinforced Box Girders, Precast Post-Tensioned Concrete Girders, Composite Deck Sections and orthotropic Sections.

- El-Maryotya Corridor. The Project Comprises Detailed Design and Engineering Works for Highway Bridge of 6000 meters. The Bridge Deck Consists of Reinforced Box Girders, Precast Post-Tensioned Concrete Girders, Composite Deck Sections and Orthotropic Sections.

- El Amir Majad Bridge. The Project Comprises Rreview on Design and Engineering Works for One Highway Bridge of 400 meters (Post-Tensioned Box Girders). The bridge consist of

(40x10), with variable width) typical Post Tensioned Box Girder Spans Supported on Columns With deep foundations. Responsibility, Design the bridge and prepare the tender documents Based on (AASHTO) and M.O.T

- Road El Farag Corridor. The Project will connect the existing ring road around Cairo and Shoubra with the Cairo - Alexandria Desert Highway. The project consists of 7 major intersections. The total length of corridor is 35 km. Responsibility, a Design Reviewer for Shoubra intersection.

- .

- Jabal Omar Project in Makka, Kingdom of Saudi Arabia. The project consist of bridge A( this work done to carry traffic loads and the box used as technical gallery and under the technical gallery there is parking and under it there is a water tank.). Tunnel D (a down word ramp) & bridge E (multi span bridge with monolitic columns and bearings on columns). Four overpasses (simple span prestressed slab bridge) two underpasses. Responsibility, a Team Leader and Design Reviewer.

- Ahmad Orabi (Ambaba) Tunnel. Consist of diaphragm walls, closed section, open section. Responsibility, a Team Leader and Design Reviewer

- Giza tunnel. Consist of piles used as retaining structure, closed section, open section - cantilever walls. Responsibility, a Team Leader and Design Reviewer.

- International Costal Road Motoubs link. The Project Comprises Detailed Design and Engineering Works for Highway Bridge of 14.50 kilo meters. The Bridge Deck Consists of Reinforced Box Girders, Precast Post-Tensioned Concrete Girders, Composite Deck Sections. Responsibility, Design the bridge and prepare the tender documents Based on Egyptian Code and British standard for steel, concrete and composite bridges BS5400.

- International Costal Road Tammaly link. The Project Comprises Detailed Design and Engineering Works for Highway Bridge of 12.40 kilo meters. The Bridge Deck Consists of Reinforced Box Girders, Precast Reinforced Concrete Girders, Composite Deck Sections. KAMEL A. KAMEL Page 5

Responsibility, Design the bridge and prepare the tender documents Based on Egyptian Code and British standard for steel, concrete and composite bridges BS5400.

- Moroto- Nakapiripit (Kampala, Uganda). The Project Comprises Detailed Geometrical and Structural Design of Widening a 93.5 km Length Road Including the Detailed Structure Design for The Existing Structures Along The Road such as Bridges and Culverts in addition to a detailed geometrical and Structural Design of a Precast Prestressed Concrete Bridge of 150m Length. Responsibility, Design the bridge and prepare the tender documents Based on British standard for steel, concrete and composite bridges BS5400.

- Berat - Tepelene (Albania). Structure Design and Preparation of Structural Drawings for Sewage Treatment Plant, pumping stations for water network and sewerage network and ten Ground tanks With different Capacity The Cost of Project 16.8 million $.The client is Republic of Albania Responsibility, Design the bridge and prepare the tender documents Based on British standard for steel, concrete and composite bridges BS5400.

- Full structure design and detailing for the project of Semo Bridge (Reinforced concrete box girder).

- Full structure design and detailing for the project of El-RAY Tunnel (Giza Square) (Egypt).

- Magles Al Dawla Project in Egypt. A building (bedroom and ground and 12 replicated floors and the structure was to be on pile foundation.). Responsibility, a Team Leader and Design Reviewer.

2004 - 2006 With El Kafrawy Office for Engineering Consultancy, Egypt, Structural Engineer:

- Structure Design and Preparation of Structural Drawings for many villas of Palm Hills Compound With different statical system more than 25 villas

- Structure Design and Preparation of Structural Drawings for many villas of Alhadba Compound With different statical system more than 10 villa

- Structure Design and Preparation of Structural Drawings for Elyessmain School stage one

- Structure Design and Preparation of Structural Drawings for Gaba Alla mall

- Structure Design and Preparation of Structural Drawings for Abu bake Elsedik Mosque

- Many Different Types of gravity walls (Height 10 m: 28m)

- Structure Design and Preparation of Structural Drawings for Many Residential Buildings

“Basement, ground and nine typical floors)(More than 7 Types R.B) of Palm City Compound.]

- Structure Design and Preparation of Structural Drawings for SPA Building “Taba Resort Batch Company

- Full design and detailing of many steel frames of various spans, heights and crane loads:

• Fine Factory

• Al-Nasr Chemical Factory

• Ashraf Soud Factory

• Algeria Cement Factory

• Steel Sheds “October City”

• Abo-Roash Factory

• Alsbak Factory

• Cairo Factory

• Domiatt Storage

KAMEL A. KAMEL Page 6

2001 - 2004 With ECO Consulting Engineering, Egypt, Structural Engineer:

- Structure Design and Preparation of Structural Drawings for Sheraton Heliopolis Hotel “3 Stories under Ground Car Park and Six Stories above Ground

- Structure Design and Preparation of Structural Drawings for Museum Garden at “Dar El-Kotob El Masria”

- Structure Design and Preparation of Structural Drawings for many villas of Arebla Park Compound With different statical system more than 6 villas

- Repair Works for many Different type buildings as Sohagg Hospital, more Than 25 Villa in Palm Hills, and Television Building

- Structure Design and Preparation of Structural Drawings for Many Swimming pools with tanks and Mech. Rooms

- Full design and detailing of Steel Frame of Wheat Tank at Damietta Port with various spans, heights and crane loads

- Structure Design and Preparation of Structural Drawings for Egyptians Al Gazira Museum

- Full design and detailing of Steel Roof and All Sheds for Sheraton Heliopolis Hotel

- Workshop Drawing for Sheraton Heliopolis Hotel

2000 - 2001 With Dr. Ahmed Sabry Office for Consulting Engineering, Egypt, Structural Engineer. Structure Design and Preparation of Structural Drawings for the following projects:

- Special Building Follow Army Force

- Many Residential Building (Ground & 7 typical floors)

- Many Residential Building (Basement, Ground & 9 Typical Floors)

- Many Administrations and Commercial Buildings.

- Baloza Compound more than 25 villas.

9/2000 – 10/2004 as part time with Cairo Consulting Engineering Office - Dr. Mohamed Rabie, Egypt, Structural Engineer. Structure Design and Preparation of Structural Drawings for the Following Projects:

- Many Administrations and Commercial Buildings

- Many Different Types of gravity walls (Height 4 m: 22m)

- Some Building at Accommodation Facility at Rayaan and Karama

- Qarun Petroleum Company

- Meach. Room and Swimming Pool In Faculty of Engineer - Cairo University

- Structure Evaluation of R.C Structures of The 25 Bridges In Saltanet Oman

- Made As Build Drawing of The 25 Bridges in Oman

- Many Septic Tanks For The “Wasco” Company

- Many Residential Building (Ground & 5 Typical Floors) - Alexandria

- Many drain sump pit

- Structural Evaluation of R.C Dringe Station in El-Fayoum

- Workshop Drawing for Sheraton Heliopolis Hotel

- Workshop Drawing Some Building at Accommodation Facility at Rayaan and Karama Qarun Petroleum Company

- Helwan Mosque

- Workshop for R.C Structures of the 25 Bridges in Oman KAMEL A. KAMEL Page 7

9/2004 to 10/2012 as part time

With PIONEERSFOR CONSULTING ENGINERING as senior structural engineer on the following projects:

- Nad Elsheba Development, Dubai. Bridge 2B: The project comprises detailed design and engineering works for four adjacent bridges with nine span bays and width 17.50 meters, The bridge is post-tensioned box girder with spans varies from 32 to 60 meters. Bridge 2C: The project comprises detailed design and engineering works for four adjacent bridges with nine span bays and width 11 meters, The bridge is post-tensioned box girder with spans varies from 32 to 72 meters. Bridge 2A: The project comprises detailed design and engineering works for eight span curved, skewed bridge and width 13.00 meters, The bridge is post-tensioned box girder with spans varies from 32 to 60 meters. Responsibility, a Team Leader and Design Reviewer

- Full structure design and detailing for Domiatt steel structural storage

- Design Some Bridges for The Municpalties of Jeddah (K.S.A). The Project consists of Seven Bridges in Jeddah, Saudi Arabia: Wadi Wabah, Wadi Ghran, Wadi Shwan, Wadi Rabgha, Wadi Abwaa, Wadi Thtiban, Wadi Adam all of them post-tensioned concrete girders. Responsibility, Design the bridges and prepare the tender documents.

- Construction of Bridges for King Abdulaziz Road With Ismel Abu Dowood Road Intersection Bridges (K.S.A). The structure Comprises of Ten Spans, Seven of them are 25 m Reinforced Concrete Box Girder, Three Spans are Continuous Prestressed Box Girder 45mx80mx45m Between Piers and Abutments Centrelines, The Left Ramp Reinforced Concrete Slab Type, Providing an Overall Length of 436 m Between Centrelines of Abutments, The Abutments and Piers are in-situ Reinforced Concrete Supported on Pile Cap Rested on piles. The Bridge is Constructed over the Main Rain Water Drainage Culvert, Extreme Care should Be Taken to Safeguard it During Constructions. Contractor Should Verify the Location and According the Design. Responsibility, Design the bridge and prepare the tender documents Based on (AASHTO) and M.O.T

- Uganda Pedestrian Bridge (steel Bridge). The project comprises of two adjacent span 30m with width is 6.5m.

- Army buildings for Uganda.



Contact this candidate