KARLA D. GUBBINE

*** ******** ******* ****

Smyrna, DE 19977

Email: ac3m91@r.postjobfree.com 302-***-****

Summary

20+ years’ experience in piping design - White Pigments & Mineral Products (TiO2) as Lead Process Piping Designer. Polymer Products as site Lead Process Piping Designer working directly with engineers & construction. Worked on Nuclear Waste Treatment Facility as Senior Piping Designer. Worked 9 years on various sites producing as built walk-down sketches in preparation for large and small projects. HOKU Materials, Inc. Polysilicon Plant in Idaho created various documents such as P&ID, equipment & piping arrangements to support site requirements. Nuclear Power Project adding new Unit 3 to Calvert Cliffs Unistar Facility in Maryland as Sr. Designer using PDMS. Bechtel/B&W Inc. mPower project building SMR nuclear power plants using Smartplant/Microstation. Participated in site shutdowns to ensure all safety guidelines were followed and oversaw piping installations for project upgrades. I have a TWIC card for work at sites that require having the card.

Education & Software

•3D PDMS - Plant Design Management 3D System & Facet Tools-7 years’ experience

•3D PDMS - Plant Design Management Draft System-1 1/2 years’ experience

•3D PSDS Plant Space Design Series - 1 year experience

•3D SmartPlant (SP3D) modeling-3 years of experience

•2D Microstation 20 years using version 95- 5 years version J, 1 year version 7 & version 8i

•Navisworks used in 3D Modeling for interference with piping, equipment, steel and concrete

•Completed seminar on Pipe Plus which is used throughout the country on chemical plants to monitor thickness of pipe and equipment used for hazardous chemicals.

•Completed seminar on Process Piping Fundamentals and Process Piping Layout at The Center for Professional Advancement.

• Newark High School.

Sabine River Works for Dupont (KBR Engineering, Newark Delaware)

Piping Designer, Oct 2015 to Oct 2015

Traveled to site to walk down piping in the field for verification.

Contracted to prepare isometrics to comply with Mechanical Integrity.

Identified all equipment in order to update equipment arrangements and to meet corrosion thickness of piping and equipment Mechanical Integrity.

Although length of assignment was not long; work was completed in a timely manner to the satisfaction of the client.

Gas & Oil Project for Husky Energy Lima, Ohio & Breathing Air Project for Dupont Chambers

Works Penns Grove, N.J. (KBR Engineering, Newark Delaware)

Piping Designer, December 2014 to July 2015

Working for KBR as a Technical Staffing Resource employee using PDMS software.

Prepared plot plan to replace pumps, filters and piping in Coker Area located Lima, Ohio.

Position requires ability to interpret scans from the site to install new pumps and piping.

Job was put on delay until 2017 due to oil prices too low for Husky to make a profit.

After I had only been on the job for 1 month.

After the delay on the Husky Energy project I moved on to the DuPont Black Hawk project where I worked with the lead designer updating isometrics where the design had changed after it had been issued to construction. Below were the types of changes that needed to be fixed in the model:

Isometrics that had missing information such as continuation changes, graphic changes where components were not connected properly in the 3D PDMS software.

Isometrics that did not match P&ID; wrong insulation, electric traced that was not shown properly.

Equipment that did not have all the nozzles located in the model.

P&ID changes where tie-ins were in the wrong place.

Instrumentation added to hold spacing while model components were created in the 3D model.

After approval of all the changes isometrics were sent to the lead designer for final approval before issued for fabrication and construction.

The next assignment with KBR was to install new Breathing Air System for Chambers Works site in New Jersey.

Created equipment arrangements that consisted of a plan view and sections using draft in PDMS for estimating.

Routed pipe in the PDMS model for the equipment as well as tie-ins on the pipe bridge.

Created piping isometrics for estimating.

Traveled to site to walk down pipe rack for routing of pipe from equipment building housing the Compressor, Purifiers and Receivers for 70% review.

Continued walk downs at the site to take measurement to complete the tie-ins from the Compressor building.

Navisworks was used for interference.

LNG Project in Cove Point, MD. (Kiewit Engineer/Construction Inc, Lenexa Kansas)

Piping Designer, November 2014 to December 2014

• Returned to contract my design experience in SmartPlant to route small bore pipe to meet schedules on other projects. Making sure 3D SmartPlant model matches 2D SmartPlant P&IDs which ensures the isometrics for construction are complete.

• Routed piping per the pipe specifications set forth on the P&I diagrams and the guidelines supplied

by the client.

Small Projects for Dupont Delisle Site, Pass Christian, MS

Piping Designer, March 2014 to October 2014

Working at the Delisle Site as a Technical Staffing Resource employee using PDMS software.

Using 2D Microstation V8i to incorporate the PDMS design before and after installation.

Position requires walk downs with R&D engineers to understand where and what needs to be installed. Retro fitting small/large pipe for site projects.

Model reviews are required to bring construction and R&D engineer together to discuss the design and make comments. After comments are incorporated the package is created to issue to engineers,

construction and area supervisors.

Package includes isometrics, P&ID and any cut sheets of equipment, control valves and other instrumentation as required. Prepare tie-in list for construction.

Used Navisworks for 3D interferences.

LNG Project in Cove Point, MD. (Kiewit Engineer/Construction Inc., Lenexa Kansas)

Piping Designer, Sept 2013 to March 2014

• Contracted my design experience using SmartPlant to route pipe. Correlation which is the process where the 3D SmartPlant model assures the SmartPlant P&ID match the model. If the model does not match an error will occur. The error will show on the P&ID and will not correct itself until the model is fixed.

• Routed piping per the pipe specifications on the P&I diagrams and the guidelines supplied by the client.

• Kiewit require using Lisega support system for piping shown in the model. The supports are shown on the isometrics so that the Pipe Stress engineers can load them into a pipe stress model for analysis. Create shop isometrics using Bluebeam for released drawings.

Dupont Victoria Project to Replace Boiler (Day & Zimmerman in Greenville, SC)

Piping Designer, April 2013 to August 2013

• Contracted my design experience using the new version 12.1 in PDMS to route pipe, verify equipment nozzle locations match piping specifications on the P&I diagrams and the guidelines supplied by the client.

• This position requires my skills in pipe supports for stress analysis if needed. The client also uses Quad Point which uses photos and scans of the existing site to route pipe. This process is beneficial in that the scans prevent interferences when routing new piping as well as new pipe tie-ins to existing lines.

• Working with Day & Zimmermann piping designers and lead designer to install new pipe for a facility in Victoria, Texas

Lauren Engineering in Knoxville, TN

Piping Designer, June 2012 to April 2013

• Contracted my design experience in SmartPlant to route pipe, verify equipment nozzle locations & match piping specifications on the P&I diagrams and the guidelines supplied by Lauren Engineering.

West Fargo, ND Amec Engineering in Greenville, SC

Piping Designer, Jan 2012 to May 2012

• Contracted my design experience using PDMS to route pipe, verify equipment nozzle locations match piping specifications on the P&I diagrams and the guidelines supplied by the client.

• Created draft plans & sections, labeled equipment and piping using the PDMS Draft software.

• After routing pipe my responsibility was to add supports for stress analysis.

• Worked with AMEC engineers and supervising designers to design an expansion facility to be built in West Fargo, ND.

• Traveled to the AMEC office in Minneapolis Minnesota to assist in getting the project back on track. Fixed & checked and updated the model so the isometrics could be issued for construction. Updated the draft drawings with labels to identify the equipment and piping shown in the 3D PDMS Model.

Navisworks was used to fix the interferences shown in the model.

Olin Chlorine Alkali site Charleston, TN(Allstates Technical Services in Birmingham, AL.)

Piping Designer, June 2011 to January 2012

•Contracted my design experience using PDMS to route pipe, orient & verify equipment nozzles to

ensure routing of pipe in the model met all specifications and guidelines.

•After routing pipe, my responsibilities turned to add supports for stress analysis.

•Worked with KBR engineers and supervising designers to design a chlorine process expansion at Olin Chlorine Alkali site in Charleston, TN.

US EPR Project Bechtel Corporation in Frederick, MD.

Piping Designer, Jan. 2009 to June 2011

• As an employee with Bechtel Corp. worked on US EPR project designing new process to existing Calvert Cliffs Nuclear Facility (Unistar) in Maryland. Utilizing my experience in PDMS version 12.1.

•Bechtel and Babcock & Wilcox Inc. joined in a partnership to engineer/design to build SMR (Small Modular Reactors) in the nuclear power industry. The 3D software of choice is Smartplant and 2D Microstation software.

•Worked with engineers to design the SMR nuclear power plants using 3D SmartPlant & 2D Microstation.

•Worked with engineers & designers to support existing nuclear power plants run by the Southern Power Company.

Polysilicon Plant in Idaho (Shaw Group Cambridge, Ma.)

Piping Designer, Apr. 2008 to Nov. 2008

• Contracted my expertise in piping using 2D Microstation design system to assist the piping and equipment layout for HOKU Materials, Inc. Polysilicon Plant in Idaho.

• Worked with engineers and designers from Shaw Group Inc. to ensure piping design meets the guidelines and specifications supplied by Shaw Group Inc. and its client.

Vitification project Hanford, WA (Bechtel National, Inc. Richland, Washington)

Piping Designer, Jan. 2007 to March 2008

• Contracted my expertise in piping using (PSDS) Plant design system for a nuclear waste treatment plant to be built at the Hanford site in Hanford, Washington.

• Position requires training in nuclear procedures mandated by Department of Energy via Bechtel National, Inc.

Polymer Products Plant BE&K Engineering & Construction, Raleigh North Carolina

Piping Designer, Dupont Fayetteville Works Jan. 2001 to Jan. 2007

• Responsible for site wide process design, continuous effort to meet ISO9000 Regulations along with OSHA compliance required by the government.

• Led process design for Polymer Products plant work orders valued up to $250,000, daily support of operation and maintenance personnel to maximize plant up time.

• Assisted in SAP work order process used for plant upgrades, maintain history of equipment, piping, as well as all other site engineering and office needs.

• Supervised of up to 9 piping designers, whose duties were to update drawings, drawing schedules,

Material & Equipment schedules and document control for the site.

• Used 3D PDMS created construction packages containing isometrics with MTO, equipment layouts, specifications, equipment details, calculations, tie-in list with locations, etc.

TiO2 Project sites, E.I. DuPont de Nemours & Co., Wilmington, DE

Piping Designer, Ti02 Pigments Plant 1973 to 2000

• Responsible for contract designer workload continuous effort to meet ISO 9000 regulations along with

OSHA compliance required by the government, using 2D Microstation version 9

• Led project designs ranging from $100M to $200MM, daily support of operation, maintenance and personnel to maximize plant operation using 2D Microstation version 95.

Design Capabilities

•Process Designer for large project responsible for preparing all types of drawings such as Flow Sheets, Process & Instrument Diagrams, Equipment & Piping Arrangements, Details and Isometrics used in production design phase by outside contractor.

• Identified space constraints for installation of equipment to keep costs down by 20%. Identified pipe run and other support constraints to help maintain and operate process after construction.

• Field experience identified equipment and pipe boundaries to prevent cost increases by 20%, which also updated drawings, used for ISO 9000 certification and OSHA regulations.

• Maintained ongoing schedule agreed upon with state and federal government to complete ISO 9000 certification and prevent environmental incidents.

• Knowledge of all engineering and design standards required by Process Safety Management and Environmental codes keeps maintenance and operations online and down time to a minimum, which results in low costs.

• Created designer manual used by contractors and other plant sites as a tool to prepare complete and consistent documentation in bid packages.

Computer Skills

• Certified in the use of Microstation which create the Computer Aided Design files(CAD) needed for project design work. Capable of translating drawings from AutoCAD to Microstation.

Certified in the use of Plant Design Management 3D System (PDMS) used in modeling plant site expansions and small projects for construction.

Certificate Process Piping Fundamentals at The Center for Professonal Advancement.

Certificate Process Piping Layout at The Center for Professonal Advancement.

Certificate of Excellence by DuPont WP&MP Engineering.

Certificate of Excellence for my extra efforts in FEL.

Certificate of Excellence for Planning & teamwork allowed the Edge Moor Designers to continue to do their job during power outage.

Trained in 3D SmartPlant software.

• Used PSDS (Bentley 3D system) to design and engineer a Nuclear waste facility in Washington State.

• Experience in Microsoft Office applications such as: Access, Excel, PowerPoint, and Word.

Contact this candidate