Senior Well Test/DAQ Operator

ODILI IFEANYI ISAAC

Nationality : Nigerian

Date of Birth/Age : 15th July, 1990 / 27yrs

Total years of experience : 5 years

Highest educational qualification : B. Tech in Petroleum Engineering.

Designation : DAQ/Well Test Snr. Operator.

Passport Number : A07451967

Mobile Number : +234**********.

Email : ***************@*****.***.

Address : Block 127, Chris Otulana Crescent, Lekki

Phase 1, Lagos, Nigeria.

PROFILE

With a university degree in Petroleum Engineering, I have been involved in all stages and aspects of well test operations, including Testing Data Acquisition, Test Design & Planning (Test Well On Paper - TWOP). I have significant amount of onshore and offshore experiences, working with producing and service companies, and engineering consultancy firms.

I can adapt to new environments, work facilities and Softwares easily.

SKILLS

Testing Data Acquisition (TDA)

Ability to prepare the DAQ system as per job requirement.

Excellent at rigging up all DAQ sensing units, with great attention to weather and hazardous areas.

I can set up & check all channels, interface units, computer system and printers.

Excellent at monitoring the whole testing operation on the DAQ computer.

Prepare test reports from acquired data.

I am well acquainted with the basic formulas and requirements for rate (Oil, Gas, and Water) calculations.

Softwares used include: iPro 1000 wireless system, HALLIBURTON’S RPT6,

and SCHLUMBERGER’S HAND WELLTEST SOFTWARE.

Well Testing

Excellent at Spotting and rigging up all well test equipment.

Ability to operate surface testing equipments such as Choke Manifolds, Test Separators, ESD system, Sand Traps Surge Tanks etc.

Sampling and measuring Oil Shrinkage, Oil & Gas gravity, Produced water Salinity etc.

Ability to rig-up well test instrumentation.

General Equipment Maintenance after rig-down.

Computer/Well Test Design skills

Ability to produce Process Flow Diagrams (PFDs) and P&IDs for a well test operations.

Adept at using AutoCAD and MS Visio for Well Test PFDs.

ICT competent (MS WORD, MS EXCEL, MS OUTLOOK, MS POWERPOINT, & MS PROJECT).

Excellent Presentation Skill.

WORK EXPERIENCE

Company: Sterling Energy Exploration and Producing Company.

Period: January 2016 – Till Date.

Position: DAQ/ Senior Well Test Operator.

Location: Lagos, Nigeria

Company: Well Fluid Services Nigeria Limited.

Period: August 2012 – October 2015.

Position: Well test Operator

Senior Well test / TDA Operator

Location: Port-Harcourt, Nigeria.

WORK EXPERIENCE DETAILS

Experience in DAQ operation

1.Well Fluid Services Nigeria Limited.

Prepared iPro 1000 wireless data acquisition (DAQ) system for mobilization to site.

Rigged-up wireless pressure and temperature sensors (field units) on well test/production equipments and other required locations.

Launched & Set up the DataPORT monitor software prior to well opening.

Monitored well test data using the DataPORT monitor software.

Exported the acquired well test data from the Data monitor software to HALLIBURTON’S RPT6 for processing and preparation of test reports.

Sampled and measured well effluent properties such as: Specific Gravity of oil, BS&W, Gas S.G etc.

Prepared well test/production reports and Sequence of events.

I used iPro 1000 DAQ system for the following well test jobs

CLIENT

JOB

SEPLAT PETROLEUM, NIGERIA

Well testing of

OKPORHURHU 8LS & 8SS

SAPELE 28 WEST

OROGBO 5

CONOIL, NIGERIA

Drill Stem Test

2.Sterling Energy Exploration and Producing Company, Nigeria

Rigged-up pressure and temperature gauges (based on rating specification) on the wellhead, separator, data-header, Surge tanks and other required positions.

Rigged-up Separator instrumentation: Differential Barton Recorder (1500psi/400InchH2O), Digital Differential meter, 1” & 2” Turbine meter/totalizer (for both Oil and Water lines) etc.

Manually acquired well test & production data during well testing and extended testing (EPF).

With the aid of other well test personnel, I carried out Combined Meter Factor (CMF) for meter proving and Oil shrinkage.

Sampled and measured well effluent properties; BS&W, Salinity, Specific gravity of oil & gas, API gravity.

Logged-in sequence of events, and acquired well test data into SCHLUMBERGER HAND WELL TEST SOFTWARE (EXCEL based software for calculation of Oil, Water and Gas rates, GOR)

Prepared Well test Reports containing well effluent (Oil, Gas & Water) rates and ratios, fluid properties, and testing conditions (pressures and temperatures).

I was the data operator in the activation (gas lifting) & testing of the following wells:

LOCATION

WELLS

OKWA

5LS, 5SS, 17ST, 56ST, 54ST, 52LS, 52SS, 51SS, 51LS, 50ST, 49ST, 45ST, 43ST, 29ST.

OKWB

11ST, 9ST, 6ST, 10ST, 37ST, 21ST, 33ST, 32ST, 20ST, 19ST.

OKWC

15ST, 26ST, 27ST, 28ST, 30ST, 31ST, 25ST, 23ST, 22ST, 24ST.

OKWE

58SS, 58LS, 48SS, 48SS, 38LS, 38SS, 34SS, 34LS, 35SS, 35LS

OKWF

39SS, 39LS, 46SS, 46LS, 36LS, 36SS, 42SS, 42LS, 55ST, 57ST, 60ST,

61ST (upper reservoir layer), 62ST.

OKWG

41SS, 41LS

ANZA

7SS, 7LS, 8ST, 9LS, 9LS, 10SS, 10LS.

ANZB

11SS, 11LS, 12SS, 12LS, 13LS, 13SS, 14SS, 14LS, 15LS, 15SS, 16SS,

16LS, 17ST.

ANZC

18ST(lower reservoir layer), 22ST, 23ST, 21ST, 24ST, 20LS, 20SS.

Testing of ANZC-18ST after zone changing

Testing of the commingled flow of OKWF-61ST

Experience in Well Testing Operation

1.Sterling Energy Exploration and Producing Company, Nigeria

Attended pre-job and post-job meetings.

Accompany the well test supervisor on rig-visits.

Prepared rig-up process flow diagram (PFD) for well test/production operations in Anieze (ANZ) & Okuibome (OKW) fields, using AutoCAD

Spot and rigged-up well test/production equipment according to a defined PFD for well testing.

Participated in gas-lifting/Activation of newly completed wells in Anieze and Okuibome fields, based on well test programme.

Operated surface well test/production equipment such as: Flow Heads, Choke Manifold, Separator, Surge Tanks, Pumps, Compressors, Oil and Gas Diverter Manifolds, ESD Panel & Stations, Gas Scrubbers etc.

Set and managed Separator Pressure and level to suit the operation.

Ensured all safety rules are adhered to during operations.

Rigged-down the well test equipment at the end of the test.

General equipment maintenance.

I was involved in the testing of the wells as shown in the table above.

2.Well fluid Services Limited, Nigeria

Assisted the Well Test Supervisor on a rig visit and Pre-job planning.

Prepared spotting & rig-up process flow diagram (PFD) using AutoCAD.

Spot, rigged-up and rigged-down of surface well test equipment.

Pressure-tested of surface rig-up prior to commencing test.

Operated surface equipment competently during testing.

Sampled and measured of well effluent properties such as Specific Gravity of oil, BS&W, Computation of oil API, determination of Gas S.G.

Carried out general equipment maintenance after rig-down.

I worked as a well test operator, Senior Well test operator in the following jobs.

CLIENT

JOB

PRIME EXPLORATION AND ENERGY PRODUCING COMPANY, NIGERIA

Drill Stem Test (DST) at Asarama-toru field

PRIME 1 (Long String LS & Short String SS)

PRIME 2

NATIONAL PETROLEUM DEVELOPMENT COMPANY, NIGERIA

Maximum Efficiency Rate (MER) test at Ogini field.

MILLENIUM OIL AND GAS, NIGERIA

Well testing at Oza field.

WALTER SMITH PETROMAN

Well testing at Ibigwe field.

Experience in Early Production Facility (Extended Well Testing)

1.Sterling Energy Exploration and Producing Company, Nigeria

Rigged-up well test equipment for Early Production Facility (EPF).

Measured well effluent BS&W regularly to monitor water and sand production.

Drained Knock-Out-Drum (KOD) on the flare line to check for liquid.

Drained Separator gas-scrubber and Daniel Box to check for condensed liquid.

Monitored Storage Tanks level.

Acquired production data and prepared daily production reports.

I worked on four (4) wells as shown below.

LOCATION

WELLS

ANZB

13LS, 15LS, 16LS, 14LS

2.Well Fluid Services Limited, Nigeria

Rigged-up well test equipment for Early Production Facility (EPF).

Measured well effluent BS&W regularly to monitor water and sand production.

Injection of Pour-Point Depressant (PPD) & defoamer into the effluent stream.

Drained Knock-Out-Drum (KOD) on the flare line to check for liquid.

Drained Separator gas-scrubber and Daniel Box to check for condensed liquid.

Monitored Storage barge levels

Pumped produced oil from storage barge to loading ships.

Acquired production data and prepared daily production reports.

CLIENT

JOB

CENTURY ENERGY SERVICES

Extended Well Testing of wells 01 & 04, in

Atala field

PRIME EXPLORATION AND ENERGY PRODUCING COMPANY

Extended well Testing of

PRIME 1 & PRIME 2.

TRAINING HISTORY

Well Test 1 (Well Fluid Services Limited).

Well Test 2 (Well Fluid Services Limited).

Data Acquisition and Processing (iPro 1000 & RPT6)

Project Management

SAFETY COURSES

Certificate in Oil and Gas Safety and Health Management System.

Basic Offshore Safety Induction & Emergency Training (BOSIET).

EDUCATION

2013 B. Tech. Petroleum Engineering (Second Class Upper) Rivers State University of Science and Technology (RSUST).

2007 West African Senior School Certification Examination.

First Baptist Church High School (FBCHS).

2001 First School Leaving Certificate (FSLC) Spring Nursery and Primary School (SNPS).

ACHIEVEMENTS

2013 Vice-Chancellor’s Research Award.

INNOVATION

Design of a Flare Manifold for maneuvering Separator Effluents (Oil and gas), Air and Water; to the burners (Starboard and portside) during Production (Well) Testing.

HOBBIES

Reading and Travelling.

REFERENCES

Available on Request

Contact this candidate