Resume

Sign in

Instrument Technician

Location:
CALABARZON, Philippines
Posted:
November 30, 2017

Contact this candidate

Resume:

Profile

Passport Number: EC******* valid until: January 19, 2020

Oman Vehicle Driving License: 85875992 valid until: March 20, 2024

More than 20 years of work experience in the field of Instrumentation in various industries across the

globe

Skillful and a very resourceful individual

Self – motivated and is willing to accept challenges

Dynamic team player but can work alone if needed

Ability to be multi – tasked

Summary of Work Experience

Instrument Commissioning Technician

Target Oilfield Services LLC

Secondary to Occidental Petroleum (OXY) July 31, 2015 – April 15, 2016

Oxy Wadi Latham Field

Sultanate of Oman

Perform calibration and commissioning required on all control system input and output devices. Example: transmitters, control valves, etc.

Commissioning of Fire and Gas Detection systems to include Toxic and Flammable gases, Heat, Smoke, UV & IR detection.

Configuration, installation and startup of PLC, field devices, valves, sensor and monitoring vibrating system and other instrumentation.

Pre- commissioning, commissioning, logic testing, functional testing of different process instrument from field to DCS confirmation of feedback / status in respect to the instrument process flow specification and instrument loop diagram.

Install, maintain, inspect, troubleshoot, repair and perform preventative maintenance on all plant instrumentation, control systems, analyzers and electrical equipment.

Conduct evaluation tests on valves, motors, instruments, electronics, DCS (distributed control systems), and analyzers.

Calibration and function check of both electronic and pneumatic fire and gas instruments..

Function testing and repair of Suppression systems to include Deluge, Sprinkler, Foam and CO2 to ensure they meet set performance standards..

Assist field engineer to perform analysis and diagnosis to provide solutions to instrumentation problems.

Carry out installation of equipment, re-wiring and testing of instrumentation control panels to incorporate design modifications.

Secures necessary tools, material and equipment before starting any task and maintain in good working condition.

Follow appropriate safety procedures and permit to work system of the customer during work at site

Must understand and comply with all safety rules and company policies.

Rationalized alarms so that there are critical, high, moderate and low level alarms to assist operators.

Maintain protection of the environment and the health and safety of our employees, customers, and the communities in which we operate and/or transport our products, as our highest priority.

Maintain and repair all electrical, instrumentation and control systems on site.

Instrument Commissioning Technician

Ras Al-Hamra LLC April 16, 2011 – June 01, 2015

Secondary to Occidental Petroleum (OXY)

Oxy Mukhaizna Field

Sultanate of Oman

Calibrate and repair all types of instrumentation used for measurement and control of all process variables ( flow, pressure, temperature and level ).

Pre- commissioning, commissioning, logic testing, functional testing of different process instrument from field to DCS confirmation of feedback / status in respect to the instrument process flow specification and instrument loop diagram.

Prepare work pack dossiers outlining the commissioning work scope of each systems and subsystems prior to field execution.

Performs instrument calibration, field checks, troubleshooting and maintenance on control equipment

or other equipment as assigned.

Perform calibration as required on all control system input and output devices. Example: transmitters, control valves, etc.

Commissioning of Fire and Gas Detection systems to include Toxic and Flammable gases, Heat, Smoke, UV & IR detection.

Function testing and repair of Suppression systems to include Deluge, Sprinkler, Foam and CO2 to ensure they meet set performance standards.

Calibration, servicing and overhauling of Control valves of Different types and different makers [Fisher, Rosemount, Honeywell, Siemens, ABB, and Masoneillan.

Observe safe working practices within the facility and workshop areas and ensure that applicable safety procedures and regulations are observed.

Handling calibration of field bus foundation transmitters and control valves using 475 hart communicator.

Configuration, installation and startup of PLC, field devices, valves, sensor and monitoring vibrating system and other instrumentation.

Ensures that all installation, isolation and repair work is carried our according to the applicable codes of practice and Company’s Operating Management System.

Instrument Commissioning Technician

Prosafe Production Services Pte. Ltd. April 2, 2008 – Feb. 21, 2009

FPSO Cidade De Sao Mateus

Keppel Shipyard, Singapore

Loop checking of all kinds of instrument from fields to DCS.

Pre- commissioning, commissioning, logic testing, functional testing of different process instrument from field to DCS confirmation of feedback / status in respect to the instrument process flow specification and instrument loop diagram.

Calibration of instruments involved in an onshore oil & gas environment to include level measurement by displacement, pressure differential & capacitance.

Commissioning of Fire and Gas Detection systems to include Toxic and Flammable gases, Heat, Smoke, UV & IR detection.

Perform various duties associated with installation, maintenance, troubleshooting, upgrading and calibration of pneumatic and electronics instrumentation;

Configuration, installation and startup of PLC, field devices, valves, sensor and monitoring vibrating system and other instrumentation.

Assist with development and conduct training with operational crews in preventative maintenance, checks and services, including how to properly conduct basic and intermediate repairs.

Assist installation and termination of instrumentation / control cables from main control cabinet to field device / motors.

To execute all activities safely and efficiently to agreed work plans, safety management system requirements and best working practices.

Instrument Commissioning Technician

Total Automation Middle East LLC (Offshore) August 1, 2007 – Feb. 21, 2008

Secondary to Saipem

FPSO Cidade De Vitoria

Vitoria, Brasil

Pre- commissioning, commissioning, logic testing, functional testing of different process instrument from field to DCS confirmation of feedback / status in respect to the instrument process flow specification and instrument loop diagram. .

Carry out connection, disconnection and overhauling of instruments associated in mixed refrigerant and prophane mixed refrigerant compressors As an AB, work includes steering the ship and sounding of ballast tank. Loop checking of all kinds of instrument from fields to DCS.

Perform for safely maintaining the integrity of the facility systems within the Company integrity management framework and Operating Management System which includes Fire and Gas Systems, Safety Systems, Emergency Shutdown Systems and production system.

Carry out installation of equipment, re-wiring and testing of instrumentation control panels to incorporate design modifications.

Calibration of instruments involved in an onshore oil & gas environment to include level measurement by displacement, pressure differential & capacitance.

Instrument Commissioning Technician

Total Automation Middle East LLC (Onshore) April 1, 2007 – June 21, 2007

Secondary to Saipem

FPSO Cidade De Vitoria

Dubai Drydock, U.A.E.

Field and bench calibration of all process instrument, pressure and differential pressure switch, pressure and differential transmitters, pressure and differential pressure indicator, temperature indicator.

Configuration, installation and startup of PLC, field devices, valves, sensor and monitoring vibrating system and other instrumentation.

Prepare and maintain record of instruments installed in field and support operations supervisor for inventory count in yard.

Perform for safely maintaining the integrity of the facility systems within the Company integrity management framework and Operating Management System which includes Fire and Gas Systems, Safety Systems, Emergency Shutdown Systems and production system.

To execute all activities safely and efficiently to agreed work plans, safety management system requirements and best working practices.

Instrument Commissioning Technician

Total Automation Pte. Ltd Dec. 15, 2006 – March 30, 2007

FPSO Polvo

Keppel Shipyard, Singapore

Field and bench calibration of all process instrument, pressure and differential pressure switch, pressure and differential transmitters, pressure and differential pressure indicator, temperature indicators.

Perform loop checks and function check on field sensing instruments to HVAC Control Panel.

Calibration of instruments involved in an onshore oil & gas environment to include level measurement by displacement, pressure differential & capacitance.

Loop check of Fire and Gas shutdown to system and indication from DCS.

Calibration and function check of both electronic and pneumatic fire and gas instruments.

Instrument Commissioning Technician

Sepam Specialist China Feb. 26, 2006 – Nov. 01, 2006

Secondary to Bayer Material Science

Shanghai Chemical Industrial Park

Shanghai 201507 P.R. China

Loop checking of field instruments such as PT, LT, FT, PDT & TE to DCS & PLC including its final control elements.

Calibration and function check of both electronic and pneumatic fire and gas instruments.

Supported the Pre commissioning and Commissioning of Infrastructure Phase II project.

Supported the Pre commissioning and Commissioning of a world-scale plant for the production of our high tech polycarbonate Makrolon with an initial capacity of 100,000 tones per year.

Loop check, documentation checkout, visual inspection, function check, tuning of loops, instruments and control schemes.

Calibrating of level transmitters, verification of complex control schemes, tuning of continuous control schemes and troubleshooting of all PCT equipment.

Monitoring of actual field injection process and the calibrated instrumentation output.

Documentation of any instrument subject for pre commissioning for acceptable by doing instrument and Test Record for future references.

Bench calibration of instrument and loop checking and commissioning of instrument prior to start up.

Comply with all applicable environmental, health, and safety policies to maintain a safe working environment.

Instrument Commissioning Technician

Single Boy Mooring ( SBM ) Sept.15, 2005 – Jan. 30, 2006

FPSO Capixaba

Keppel Shipyard, Singapore

Calibration of all transmitter, adjust zero and span using hart communicator.

Bench calibration of instrument and loop checking and commissioning of instrument prior to start up.

Loop checking and function testing of field control instruments from field box module to field instruments.

Monitoring of actual field injection process and the calibrated instrumentation output.

Calibration and function check of both electronic and pneumatic fire and gas instruments.

Instrument Technician

Sepam Arabia Specialist Feb. 01, 2003 – July 06, 2005

Petrokemya

Jubail, K.S.A.

Assigned in bench and field calibration of different kinds of valve either modulating or on-off valve (solenoid type).

Commissioning works of different systems such as Process Control System and Process Shutdown System and Fire and Gas System.

Calibrates Field Instruments; on-line & or bench calibration, if necessary.

Prepare and maintain record of instruments installed in field and support operations supervisor for inventory.

Calibration and function check of both electronic and pneumatic fire and gas instruments.

Documentation of any instrument subject for pre commissioning for acceptable by doing instrument and Test Record for future references.

Merging of power and control cables from marshalling cabinet to junction box through instrument side.

Perform loop checks and function check on field sensing instruments.

Instrument Commissioning Technician

Siemens - Cerberus Chittik Corporation Sept. 09, 2002 – Jan. 31, 2003

Philip Morris Greenfield

Sto. Tomas, Batangas Philippines 4200

Perform continuity checking of instrument cable from field instrument to DCS.

Calibration of all transmitter, adjust zero and span using hart communicator.

Bench calibration of instrument and loop checking and commissioning of instrument prior to start up.

Calibration and function check of both electronic and pneumatic fire and gas instruments.

Instrument /Analyzer Technician

JG Summit Petrochemical Corporation Mar. 03, 1999 – Dec. 20, 2001

Petrochemical Plant

Simlong, Batangas City Philippines 4200

Operation and maintenance of Elsag-Bailey Optichrom Advance Gas Chromatogram Analyzers.

Includes regular Preventive Maintenance and Calibration of on line GC Analyzers

Performs daily monitoring and checking of parameters and data if it has the same reading with the DCS, updating of parameters and factors, setting of flow, pressure, temperature, cycle time parameters and Peak Gating and valve switching of the sample conditioning boxes for the GC Analyzers.

Operation, Maintenance and Calibration of OHMART Radiation and Chuck Detectors.

Maintenance and Calibration of Delta-F and Magnus Oxygen Analyzers

Maintenance and Calibration of on-line Moisture and Oxygen Analyzers.

Maintenance and Calibration of Gas, Smoke and Heat Detectors and Maintenance of Plant deluge system.

Regular check-up and inventory of UHP Nitrogen, Hydrogen carrier gasses and Calibration Gasses (Air Liquid).

Participate in Loop Checking of Plant wide instruments during Turn Around Maintenance.

Instrument Technician

Atlantic Gulp and Pacific Oct. 01, 1994 – June 06, 1998

Secondary to Bechtel

Sonatrach – LNG 03

Division Liquefaction Complexe GL1/Z

Beathioua, Algeria

Test accuracy of flowmeters, pressure gauges, temperature indicators, controllers, radiation counters or detectors.

Reassembles instruments and replaces instruments in system using hand tools.

Have ability to read P&I Diagram, Functional Logic Diagram, Gate Logic, Relay Logic, Loop Diagram, Ladder Diagram & Loop Schematic..

Calibration of Pneumatic, Electronic and SMART Transmitters of different makers (Rosemount, Fuji, MTL, Honeywell, Foxboro, Endess+Hauser, Baily Fisher, Yokogawa etc.) for the measurement of Pressure, Differential Pressure, Flow, Temperature, Level, Interface Level and Density.

Calibration and Configuration using different SMART Transmitter’s Communicators and Configurators: - HART - &, HHT, HHC and SFC.

Calibration and repairing of Pressure, Temperature, Flow and Level Switches and Gauges, I/P and P/I Converters.

Trainings

Basic Purification Training

Basic Reaction Training

Basic Recovery Vent Training

Symposium On Pneumatic Control Technology

Process Logic Control Training

Radiation Safety Training

Values and Attitude Enhancement Values Training

Applied Automation Advance Optichrom Gas Chromatograph

Basic Operation & Maintenance Course

Basic Offshore Safety Inspection Emergency Training

FAC HES Training

Permit To Work Training

H2S & SCBA Training

Education

Certificate in Instrumentation Technology August 31, 1993

Process Control and Instrumentation

Don Bosco Technical College

Industrial Technician Center

Mandaluyong City, Metro Manila, Philippines

Reference

Available upon request



Contact this candidate