CURRICULUM VITAE

Yenugutala Anil Kumar

Welding Inspector & QA / QC ac3i0x@r.postjobfree.com

Total Experience: 6.6 Years. Contact no.+91-950*******. Total shutdown Experience (gulf & India): 6 Months.

CAREER OBJECTIVE:

Seeking a challenging assignment in the field of Welding and Quality Control. This utilizes my technical qualification and strength in these areas, In line with the corporate objectives of the company.

STRENTH:

Ability to manage change with ease, hard and smart working, Time and schedule management Efficiency Productivity enhancement, Quality assurance quick learner, good at multi-tasking and team work, Implementation of advanced quality techno, get along well with people of all nationalities and age groups.

EDUCATIONAL QUALIFICATION:

Four years engineering course “Mechanical Engineering” passing from JNTU Kakinada, (India)

TECHNICAL QUALIFICATION:

Certified “Welding Inspector” CSWIP 3.1 as per TWI U.K,

CSWIP Certificate No.: 80766

Certified in ASNT Level II as per SNT-TC-1A at the American Society

1)Ultrasonic Testing.

2)Liquid Penetrant Testing.

3)Magnetic Particle Testing.

4)Radiographic Testing (Interpretation).

Working Experience : Total Work Experience 7 Years.

Gulf and India Shutdown Experience 6 Months.

Currently in Cr asia ( India )

Client : HMEL (Bhatinda).

Designation : Qa/Qc / Welding Inspector.

Project Title : Dcu.

Location : Bhatinda(Panjap).

Period : From May 16.04.2017 To 15.06.2017.

Reporting To : Qa/ Qc Sr Engineer.

Responsibilities :

Monitor, witness and review project Inspection & Test Plans activities in line with approved contractual requirements approving stage inspections.

Review of Inspection & Test Plan, Material verification, all stages of inspection,

Review of material test reports.

Witnessing welder's performance qualifications.

Witnessing NDE and performing visual examinations.

Review of Radiographic films, PT and MPT & UT.

Welder Qualification test witness.

Verification of welding consumables (property, type, storage etc as per the WPS.

Study and interpretation of fabrication drawings, shop drawings, Weld map and symbols

Evaluation of pre & post weld heat treatment (PWHT) charts.

Surveillance during welding to ensure the use of approved welding parameters.

Ensures that all the measurement instruments are correctly managed and calibrated.

Inspection of spool joints fit up, alignment and dimensional accuracy as per drawing requirements.

Maintaining welding inspection/NDT reports and record tracking.

Preparation of welding inspection summary/Joint tracking log.

Prepare inspection Release reports,

Verification of quantities shipped, including proper packing and identification marking.

Preparation of Weekly and monthly welder Welder Performance reports.

Currently in Al Hoty Analytical Services ( Bahrain )

Client : Banagas.

Designation : Qa/Qc / Welding Inspector.

Project Title : Cgp-ll.

Location : Banagas.

Period : From May 05.03.2017 To 25.03.2017.

Reporting To : Qa/ Qc Sr Engineer.

Responsibilities :

Inspection carried out all vessel internal and external.

Material inspection when issued to ensure correct material is issued.

Correct welding procedure is followed.

Welder is qualified for the procedure.

Witnessing welder's performance qualifications.

Correct measurements are taken to suit the site conditions.

Flange and other fittings, including stud bolts,nuts mach the piping specification(Rateing/Schedule).

Sequence of testing carried out in the correct order (Visual,Ndt,Testing,Painting)

Final inspection carried out before releasing for installation.

Review the operations worklist and follow up on every item related to inspection.

Write in detail the work carryout in the inspection log book daily.

Use level gauge to ensure alignment and other relevant inspection tools to ensure fabrication carried out as per the code and procedure requirement for any fabrication job.

Esteem projects Pvt Ltd.

Client : Reliance Industries Ltd.(Hazira).

Designation : Qa/Qc / piping Inspector.

Project Title : Cracker unit.

Location : Surat(India).

Period : From Jan 01.01.2017 To 04.03.2017.

Reporting To : Qa/ Qc Manager.

Responsibilities :

Review of Inspection & Test Plan, Material verification, all stages of inspection,

Review of material test reports.

Witnessing welder's performance qualifications.

Witnessing NDE and performing visual examinations.

Review of Radiographic films, PT and MPT & UT.

WPS, PQR Review and Approval, Welder Qualification test witness.

Verification of welding consumables (property, type, storage etc as per the WPS.

Study and interpretation of fabrication drawings, shop drawings, Weld map and symbols

Evaluation of pre & post weld heat treatment (PWHT) charts.

Surveillance during welding to ensure the use of approved welding parameters.

Ensures that all the measurement instruments are correctly managed and calibrated.

Raising Non Conformity (NCR) Report for all defective materials. and resolving the same.

Inspection of pmi spool joints fit up, alignment and dimensional accuracy as per drawing requirements.

Maintaining welding inspection/NDT reports and record tracking.

Preparation of welding inspection summary/Joint tracking log.

Prepare inspection Release reports,

Verification of quantities shipped, including proper packing and identification marking.

Preparation of Weekly and monthly welder Welder Performance reports.

Gulf Experience.

Galfar engineering & contracting saog ( Oman )

Client : Petroleum Development Oman L.L.C(PDO).

Designation : Qa/Qc / Welding Inspector.

Project Title : Off Plot Delivery contract.

Location : Lekhwair (Oman).

Period : From May 18.05.2016 To 23.08.2016.

Reporting To : Qa/ Qc Manager.

Responsibilities :

Co-ordination: Coordinating inspection activities at site, keeping a track at progress and updating the same to client along with suggestion for improvement. Handling a team of Jr. Engineers & Technicians.

Monitor, witness and review project Inspection & Test Plans activities in line with approved contractual requirements approving stage inspections.

Review of Inspection & Test Plan, Material verification, all stages of inspection,

Review of material test reports.

Witnessing welder's performance qualifications.

Witnessing NDE and performing visual examinations.

Review of Radiographic films, PT and MPT & UT.

WPS, PQR Review and Approval, Welder Qualification test witness.

Verification of welding consumables (property, type, storage etc as per the WPS.

Study and interpretation of fabrication drawings, shop drawings, Weld map and symbols

Evaluation of pre & post weld heat treatment (PWHT) charts.

Surveillance during welding to ensure the use of approved welding parameters.

Ensures that all the measurement instruments are correctly managed and calibrated.

Raising Non Conformity (NCR) Report for all defective materials. and resolving the same.

Inspection of spool joints fit up, alignment and dimensional accuracy as per drawing requirements.

Maintaining welding inspection/NDT reports and record tracking.

Preparation of welding inspection summary/Joint tracking log.

Prepare inspection Release reports,

Verification of quantities shipped, including proper packing and identification marking.

Preparation of Weekly and monthly welder Welder Performance reports.

Experience In INDIA

Megha engineering and infrastructures ( India )

Client : Oil and Natural Gas Ltd (ONGC).

Designation : Qa/Qc / Welding Inspector.

Project Title : Assam Renewal Project Group A(ARP Group A) .

Location : Assam(India).

Period : From May 25.05.2011 To 02.05.2016.

Reporting To : Qa/ Qc Manager.

Demonstrated Expertise In Assam Renewal Project Group A:

Inspection of pipe joints, Structural joints, HP,LP,MP & Heater Treaters, Bath Heaters Lines and Skid connection.

ASME codes, ASW and BS Codes, NDT, Hydro testing, Welder Qualification, WPS, Documentation.

NDT.

Welding of different materials like cs,ss etc.

Thermal Treatment of material pre heating, Stress reliving, Inter-pass temperature & post heat treatment witness.

Fabrication procedure, erection sequence, quality procedure, inspection method, reading drawing isometric, GAD, P&ID.

Maintaining the records of calibration and testing equipment as per the quality.

Knowledge of Code

ASME Sec – V, ASME Sec VIII Div 1, ASME Sec IX, ASME Sec. II C, API 1104, ASME B 31.1, ASME B 31.3, AWS D1.1

Method: - As Per Client Procedure.

ADDITIONAL QUALIFICATION & SKILLS:

Window Vista, XP, Win 7.

Planning software:-Ms Office.

Designing software:-Auto cad2010.

PERSONAL INFORMATION:

Full Name: Yenugutala Anil Kumar

Date of Birth: 25th Aug 1990

Religion: Hindu

Sex: Male

Nationality: Indian

Marital Status: Unmarried

Languages Known: English and Hindi and Telugu

Passport No.: L6731229

Skype id: anil14371

Passport date of issue: 09th Jan 2014

Passport date of expiry: 08th Jan 2024

Home Address : S/o Krishnarao,

3-85, jaganadhapuram(Vill),Burja(m/p),Srikakulam,

Andhrapradesh,India,Pin-532445.

Declaration :

I assure your good selves that the information furnished above is true and fair to the best of my knowledge and if am selected, I assure that I will discharges my duties diligently, methodically and to the entire satisfaction of my superiors.

Date:

Place: Y.Anil Kumar.

Contact this candidate