Resume

Sign in

Microsoft Office Engineer

Location:
Riyadh, Riyadh Province, Saudi Arabia
Salary:
500 dollar daily
Posted:
November 13, 2017

Contact this candidate

Sherif Metwalli Hammed Annan

Mailing Address : P.o box 35614, Saint-May, Meet-Ghamr, Ad-Dakahlia governorate, Egypt.

Phone : 0020504844874

mobile : 002 01001148771 or 00966 564776756

E-mail : ac3avj@r.postjobfree.com

Applicable Key Skills:

Dedicated Drilling Fluids specialist and have a good technical, analytical and communication skills demonstrated by 7 years of experience providing well site service in HP-HT, Extended Reach, Overbalance,Under balance, conventional Direction drilling ...inclination up to 90 deg and unconventional operations. Onshore Slim deep gas design and K2 design for shallow wells drilling with the largest operators in Middle East -Saudi Aramco. Under broad direction, responsible for the development and implementation of the drilling fluid formulations, completion fluids and Solids Solutions recommendations. Highly skilled in all standards API drilling fluid test and coincide at interpreting results with applying such data to improve fluid specifications to facilitate well drilling operations. Utilizing the company modeling program to optimize fluid properties for hole cleaning, hydraulics run and submitted final well recap or any required cost analysis reports. Provide primarily remote supervision of the field service representatives or service supervisors assigned to projects. Responsible for delivering to the customer all information relevant to management of the well-bore construction process. Assist in training and mentoring field Service representatives and service supervisors.

Current: Jan2014-till now

EMEC senior drilling fluid engineer-Level III

Haradh and Al ‘Uthmaniyah Field, Eastern KSA

ARAMCO, Deep Gas Drilling Division

Responsibilities:

•Competent and committed to apply optimum fluid properties to ensure best deep gas drilling practice under high temperature up to 300 f & pressure over balance up to 4800 psi, moreover while rotary steering drill for conventional and unconventional wells at inclination up to 90 deg, extended reach to 17800’ft TVD.

•Daily monitor technical requirements and be sure it is concur to operational focal point for deep gas drilling operations.

•Inventory assessment in order to track materials consumption for reporting and billing purposes to ensure there was adequate inventory for use in daily operations.

•Providing and sharing a technical data & experiences internally and externally with other service operators and clients.

•Presenting a training course internally developed for entry level drilling fluid engineers; recently I have been elected to present training course to our client-ARAMCO.

•Liaising with all relevant drilling rig crew and for administrative support service contractors, also drilling fluid technical support service if there are fluids issues.

•Aware to IADC WELLCAP standards as well as specific local requirements.

From February, 2012 to January, 2014

EMEC senior site fluid specialist: level II

Shedgum, Haradh and Al ‘Uthmaniyah Field, Eastern KSA

Aramco, Gas Drilling & Work over Development Division.

Responsibilities:

•Participate in products selection of chemicals applicable with fluid formulations accordance with well plan or as drilling engineer advice.

•Testing drilling fluid for compliance with drilling fluid specifications that are set by advisors, therefore adapt drilling fluid to operation strategies dedicated to achieve drilling targets.

• Reported evaluation & regularly calibrated and ensure that all drilling fluid test equipments maintain well and complete.

•Participate on site management meeting and all relevant drilling crew meeting to implement work orders.

•Recommends on the proper use of solids control equipments and any other drilling fluid relevant equipments to optimize the required fluid specifications and assess their efficiency periodically.

•Responding on operational and technical queries from customers such as: - standard fluid specifications, hydraulics calculations, daily material consumption as well daily inventory reports.

•Possess decision making capacity as well handling fluid in various drilling operations such as milling, wellbore logging, formation coring sample and rotary steering activities.

•Utilize Logistical Planning skills to ensure the well be supplied by material and services in timely manner based on anticipated conditions and maintain accurate inventory records.

•Supervised the hazardous material handling and storage according client environmental regulations.

•Observe and provide drilling crew with applicable materials safety data sheet and chemical hazards book to implement the best handling practice to maximize personal safety.

From February, 2010 to February, 2012 Secondary Drilling Fluid specialist, KSA

Responsibilities:

•Additional support to provide technical field service in various circumstances such as fluid loss prevention, HPHT well drilling; pressure over balance drilling to maximize well values.

•Coordinate all fluid system activities to minimize costs and ensure customers satisfactions.

•Furnished suggestions and solutions to the operator for maximize operation efficiency.

•Utilize Knowledge of company products and services in conjunction with experiences in drilling fluid technology to optimize service quality.

•Comply with health, safety and environmental regulations in all aspects of job performance.

From February, 2010 to January 2011 Drilling Fluid Trainee, Egypt

Drilling & Completion Fluids related Training:-

•Fundamentals and familiarization to all onshore and offshore rigs.

•Formal Basic Mud School training in colloidal and general fluid chemistry, drilling hydraulics calculations, completion fluid engineering.

•Safety induction including H2S awareness’

•Integrated mud school

•Advanced mud school

•Stuck pipe prevention

•Lost circulation prevention

•Chemical & materials hazards.

•Material logistics, work management.

Fluid experiences:

•Mix and run the most applied drilling fluid systems on Middle East as:-

Spud pud mud, high-clay concentration mud, water-diesel direct emulsion mud from 57 pcf / 7.6 ppg up to 61 pcf / 8.2 ppg,low solids no dispersed mud, potassium and sodium polymer mud, high density mud up to 155 pcf-2.48 s.g-20.72 ppg.

•Mix and run most of drill-in and completion fluids such as sodium chloride, potassium chloride, calcium chloride, calcium bromide, sodium format, potassium format and Sodium potassium format blend.

•Contributes as per Saudi aramco regulations to share time and involved with other fluid service providers like Baker, Baroid, MI-swaco to run and implement their fluid systems such as: Hydro-Guard, Max-Bridge & Inhibitive drilling fluid and unconventional loss prevention.

Field Exposure:

I exposed to various drilling challenges and many of fluids contaminants such as:-

Well name

Exposed to

ANDR-604

Partial loses – Wide anhydrite zone -Salt water influx

UTMN-2233

Unconventional direction drilling-well bore instability

UTMN-1940

Unconventional direction drilling-Differential sticking.

UTMN-1928

Pilot hole –highly sensitive shale drilling/sloughing shale -Bit balling

HRDH-1178

Steer drilling– gas influx combine with H2S

UTMN-2058

Unconventional steer drilling-gas influx combine with H2S

HRDH-1187

Directional drilling-complete losses

UTMN-2082

Direction drilling- mechanical stuck-hole geometry

UTMN-2075

Pilot vertical hole-thermal instability

contribute to trial many drilling equipments such as NOV,HIM-DRILL performance motor, Retrievable wire-line core assembly, many of new bits designs, Expandable casing run and materials. Further details available at request.

From December, 2008 to December, 2009 Lab. Chemist, Egypt

From January, 2007 to November, 2008 Scientific Technical Support and QC program specialist, Egypt

Supporting sales pre closing efforts by performing system evaluation at customer sites in addition to performing basic operator training to customer and troubleshooting.

From March, 2005 to January, 2007 Chemicals Sales Representative, Egypt

Promote the company’s products to existing customers and develop a sales strategy with ensure achieving pre-required sales targets and identify new sales .Organizing appointments and meetings with clients. Monitor customer satisfaction, and submitting reports on sales visits.

From December, 2003 to February, 2005 Lab. Chemist, Egypt

Language and Computer skills

•Arabic is mother tongue, excellent command of written and spoken English.

•Proficient knowledge of Microsoft office: word, power point, Excel.

Countries Worked in

•Egypt

•Saud Arabia.

Language and Computer Skills

•Excellent command of written and spoken Arabic, and English and Baisc Comman of French.

•Proficient knowledge of Microsoft Office: MS Word, MS Power Point, and MS Excel.

•Excellent Internet research skills.

Personal information:

•Date of birth: 23 of June 1981

•Nationality: Egyptian

•Marital status: Married

•Military service: Completed

References:

•Hany Beeh, Drilling Engineer, Schlumberger, Norway

E-mail: ac3avj@r.postjobfree.com

•Luani Alfonzo, Senior Drilling Engineer, Saudi Aramco, Saudi Arabia

E-mail: ac3avj@r.postjobfree.com

•Mohamed Abdelazim Abdelhamid, Technical Professional Baroid,Saudi Arabia

E-mail: ac3avj@r.postjobfree.com

•Mohamed Omran Hassan, UDH Fluids support Engineer, Baker Hughes, Saudi Arabia

E-mail: ac3avj@r.postjobfree.com

Achievements:

•Lost Time Injury award for Four years continuously - NABORS 70, 2014.

“LTI awarded for no lost time for injury for four years.”

•Drilling Health & Environments Leader Ship Initiatives certificate -SAIPEM 5969, 2016

"In recognition of SAIPEM 5969 performance DHS &LTI to achieving 3 years without LTI.”



Contact this candidate