Design Engineering

*

A. YESU BALAN

Male/**years/Married/Can Travel

Email: ****.*******@*****.***

Date of Birth: 15 May 1987

Ind Mob: +91-959*******, QAR Mob: +974-********

Objective:

Intend to build a career with leading corporate of hi-tech environment with committed & dedicated People, which will help me to explore myself fully and realize my potential, willing to work as a key player in challenging

& creative environment.

I Hope to Achieve this by Working Hard and Contributing to The Growth of The Company. Job Objective : Senior Electrical Designer (Substation & U/G Cabling). Total Experience : 9+ Years

Now Working at : 4A Design and Engineering Pvt. Ltd, Chennai. Technical Qualification:

Educational Qualification:

Company Name : M/s. 4A Design and Engineering Pvt, Ltd, Chennai Address : Chennai

Designation : Senior Electrical Designer (Substation & U/G Cabling). Period : 12/02/2014 up to Still Now

Organization : National Construction Company, Doha, QATAR.

(On Deputation From 4A Design & engineering Pvt. Ltd, Chennai) Company Profile: 4A Design & Engineering Private Limited is one of the group companies of Rezayat - Kingdom of Saudi Arabia. 4A Design is the 'State of the Art' Design Engineering Centre for Power & Transmission and Building Industry. An ISO 9001:2008 Certified Company, located at Chennai, the capital of State of Tamil Nadu, in the southern part of India.

Diploma in Mechanical (D.M.E) with In Control of Directorate of Technical Education (DOTE), Institute from Morning Star Polytechnic College Chunkankadai, in 2005-2008.

HSC (+2) with an control of state board, from Ringle Doube Hr. Sec. School, Myladi, in 2004 – 2005.

SSLC with in control of state board, from Govt. Hr. Sec. School, Agesteeswaram, in 2002 – 2003. I, Job Profile – CAD Engineer Electrical (S/S Primary Design, Incoming and Outgoing EHV U/G Cabling)

2

Job Responsibilities:

Substation

Key Single Line Diagram (Overall, HV & MV SLD’S).

Conceptual Equipment Layout Plan & Sections.

S/S Inside Power Cable Routing for 220/132/33kV,220/66Kv,132/33kV & 66/11kV.

S/S Inside Cable Try Routing.

Coordination of General Arrangement Drawing for different manufactures.

Preparation of Outdoor & Indoor Earthing Layout.

Preparation of Ground Floor Slab Opening Layout.

Preparation of Panel Cutout & Mounting details.

Cable Tray Layout & Complete BMO.

HVAC Coordination.

Input for life Safety Drawing.

U/G Cabling

Preparation of Key Plan Drawing.

Preparation of Detail Cable Route Drawing.

Preparation of Common Drawing & Cable Route Profile Drawing.

Preparation of Phase Sequence & Bonding Schematic

Preparation of Cable Pulling Calculation.

Co-ordination with Client and Other Contractors. Project Handling:

GTC-643H-2014 (S/S & PRIMARY DESIGN)

(cont. NCC – Construction – Client - KAHRAMAA)

132/33kv 132/33kV AL BIDDA METRO s/s and MULTI-STOREY CAR PARK BUILDING GTC/450I/2011 (UG CABLING)

(cont. NCC – Construction – Client - KAHRAMAA)

U/G Cable Route Design for EHV Cable.

GTC/488G/2012 (66/11kV S/S PRIMARY DESIGN)

(cont. NCC – Construction – Client - KAHRAMAA)

GTC/488B/2012 (66/11kV S/S PRIMARY DESIGN)

(cont. NCC – Construction – Client - KAHRAMAA)

Company Name : M/s. Power Links Qatar L.L.C,

Address : Doha, Qatar,

Designation : Electrical U/G Cable Draughtsman

Period: 21/11/2011 up to 05/10/2014

Company profile : Qatar Electricity Transmission & Distribution Network. Power Links Qatar in State of Qatar, Specializing in The Field of Providing Design, Infrastructure Support Services in the Electrical High Voltage Power Transmission & Distribution Sector. (Specifically equipment Installation, Cable Laying, Jointing, Termination, Testing, Cable Fault locations services.) Job Responsibilities:

Substation Inside Cable Route Design.

Detail Cable Route Design.

Preparation Common Drawing & Cable Route Profile Drawing. 11 Job Profile – Electrical Draughtsman (S/S Incoming and Outgoing EHV U/G Cable Design) 3

Preparation of Phase Sequence, Bonding Schematic & Cable Pulling Calculation.

Co-ordination with Client and Other Contractors. Project Handling:

GTC/372C/2010 (UG CABLING)

(cont. L&T – Construction – Client - KAHRAMAA)

220kv Cable Route – Saliya Super s/s to Doha Industrial s/s.

220kv Cable Route – Jarian Jenihat s/s to Duhail super s/s.

220kv Cable Route – Thumama s/s to RAF-B s/s.

GTC/372F/2010 (UG CABLING)

(cont. N.C.C – Consultant – lahmeyer int – client - KAHRAMAA)

66kv Cable Route – Ain khalid super s/s to Ain khalid north s/s.

66kv Cable Route – Ain khalid super s/s to Ain wadi west s/s.

66kv Cable Route – Al wajbah super s/s to Al wajbah south s/s.

66kv Cable Route – Al khissa west s/s to Al kissa central s/s.

132kv Cable Route – Umm salal mohammad super s/s to Al khissa west s/s.

132kv Cable Route – Saliya primary s/s(ODSE) to al wajbha super s/s. GTC/372B/2010 (UG CABLING)

(cont. N.C.C – Consultant – lahmeyer int – client - KAHRAMAA)

66kv Cable Route – Doha Central s/s to MOI s/s.

66kv Cable Route – MOI s/s to Feriq Bin Omran s/s (ODSE).

66kv Cable Route – Doha Industrial Super s/s Doha Industial-f.

66kv Cable Route – Dohaland-1 s/s to Dohaland-2 s/s.

66kv Cable Route – SED s/s to Dohaland-2 s/s.

66kv Cable Route – ISF Camp North s/s to Duhail Super s/s.

66kv Cable Route – Duhail Super s/s to ISF CampSsouth s/s

66kv Cable Route – West bay super s/s to Sheration park s/s LUSAIL DEVELOPMENT PROJECT (UG CABLING)

(cont. N.C.C – Consultant – lahmeyer int – client - KAHRAMAA)

66kv Cable Route – LDS-2 s/s to GOULF-1 s/s.

11kv Inside Cable Route – LDS-2 s/s.

11kv Inside Cable Route – LDS-3 s/s.

QS/01/2012 (UG CABLING)

(cont. Siemens – Contractor – Qatar steel company – client - KAHRAMAA)

66kv Inside Cable Route – Qatar Steel Company-1 s/s.

220kv Cable Route – MID s/s to QSC-1 s/s.

GTC/371D/2010 (UG CABLING)

(cont. Siemens W.L.L – Contractor – client - KAHRAMAA)

66kv Cable Route – Doha Industrial-C s/s (loo-in & lopout) Al Baraha-C s/s to doha industrial-E s/s Company Name: M/s. Right Mech Engineering,

Address: No-97, periyar padai, choolaimedu, Chennai – 600 094, TN Designation: Mechanical Piping Draughtsman

Period : 08/05/2010 up to 16/11/2011

Company profile : This Company has Handled the Power Boiler Industry & Process Piping Design, Fire Fighting System, Industrial Chimney, Duct & Tank Design and Site Fabrication. II1 Job Profile – Draughtsman (Steam Line Piping, Fire fight, Duct, Tank & Chimney) 4

Job Responsibilities:

Preparation of General Arrangement of Piping Layout & Isometric drawings.

IBR & NIBR Support Drawing Preparation.

Auto Claw, Industrial Chimney & Duct Drawing Preparation.

Bill of Material Preparation & Purchase.

Co-Ordination with Client and Other Contractor.

Clients:

Soluble Cilicate - Erode.

Sheenlac Paint Corporation - Chennai.

Foods & Inns - Chitture.

Shrivari Cilicate - Erode.

Company Name : M/s. Hyundai motors india private ltd, Address : H-1, Sipoct industrial sriperumbudur, Chennai – 602 105, TN Designation : Technical Apprentice

Period : 21/05/2008 up to 10/03/2010

Company profile : This company has handled the car manufacturing. Soft skills:

1. Application : MS - Office

2. Application for field : Auto CAD -2017.

3. Plat form : Windows 98/20XX/XP

Personal Informations

Father’s Name R.Ariraman

Nationality Indian

Languages Known Tamil & English

Marital Status Married

Passport Number H7250139

Countries Visited Qatar

Permanent Address

Plot No: 7, 1st floor Makeswari Nagar 1st Street, Nesavalar Salai, Jalladayan Pet, Medavakkam Chennai-100.

DECLARATION

I hereby declare that the information and facts stated above are true and correct to the best of my knowledge and belief.

Date: Yours Truly,

Place: Qatar YESUBALAN.A

IV Job Profile – Technical Apprentice

Contact this candidate