Engineer Power Plant

MUHAMMAD IMRAN KHAN

SENIOR INSTRUMENTATION AND CONTROL ENGINEER

********.*****.****@****.*** _Page 1 / 5

More than 12 years of International experience as Senior Instrumentation and Control System Engineer worked for Engineering and Commissioning including Feed Engineering and Detail Design Engineering Projects in Oil and Gas & Power Industries. Familiar with International standards including IEC, ISA, ISO, API, Shell DEP, BP, BS, NFPA, CENELEC and NORSOK followed for design and construction of Instrumentation & Control Systems for offshore/onshore Oil & Gas facilities and Energy Sectors. KEYWORDS IN EXPERIENCE

- Engineering, Construction and Commissioning of Instrumentation and Control System this includes Control and Safety System ESD, DCS, F&G System and attending FAT, SAT, Commissioning at site.

- Familiar with application of IEC61511 & IEC61508 SIL classification, SIL verification.

- Field Instrumentation engineering and commissioning; Preparing data sheet and specification for Flow Measurement, Differential Pressure Flow Meters, Orifice, Level measurement, Tank Gauging System, Guided Wave Radar, Radar type Level transmitters, Thermowell, Thermometers, RTD, Thermocouple.

- Awareness to Hazardous area classification, Explosion Safety and ATEX.

- Engineering and commissioning of F&G Detectors, Flame Detectors, Heat Detectors, Smoke Detectors.

- Preparing engineering documentation related to design, procedures and inspection. EDUCATION

January 2000 – December 2004 (4 years)

WORK EXPERIENCE

Current Employment

Currently working in CB&I Nederland B.V as Senior Instrumentation and Control System Engineer .

(The Hague, Netherlands)

July 2013 – till date

Statoil / Hyundai Heavy Industries, Aasta Hansteen Spar Topside Project, Offshore Norway

(EPC).

Main Responsibilities & Duties

Working as a Lead Process control system engineer for engineering/site support commissioning activities including E&I interfaces and site queries.

Development of PSD C&E, ESD C&E,

PSD Level Hierarchy drawings plus Legends/typical.

Preparations of Control narratives for process and utility systems. M.Sc - Master’s Of Science (Electrical Engineering) Jonkoping University, Sweden August 2006 – December 2007 (1.5 years)

B.E - Bachelor’s Of Engineering (Industrial Electronics Engineering) N.E.D. University, Pakistan MUHAMMAD IMRAN KHAN

SENIOR INSTRUMENTATION AND CONTROL ENGINEER

********.*****.****@****.*** _Page 2 / 5

Development of the SCD’s (System Control Diagrams) according to NORSOK I-005 standard for the ESD, PSD & PCS systems.

Involved in Control system Software FAT’s and punch list clearance.

Quality Check/Approval for Process control documents developed throughout the project.

Discussing the SCD logics with ABB/Statoil and evaluating necessary update of SCDs. Employment # 1

Worked in Ramboll Oil & Gas as Instrumentation and Control System Engineer. (UAE) August 2012 – March 2013

Main Responsibilities & Duties

Detail Engineering, Preparations for Design Basis, Specifications.

Datasheets, Instruments schedule, Cable schedule, Block Diagrams, Scope of Work.

F&G Systems, Location layouts, Cable routing, I/O Lists. Employment # 2

Arabian BEMCO Contracting Co. Ltd – Oil & Gas and Power Projects. As Instrumentation and Control System Engineer. (Saudi Arabia) April 2009 – August 2012

Main Responsibilities & Duties

Preparation of Instrument Data Sheets based on Process package.

Preparation of Instrumentation P & IDs

Preparation of Instrument Block diagrams to define instrumentation scope for project.

Supervise preparation of DCS /ESD interconnection diagrams and Instrument Loop Diagrams.

Reviewing Control philosophy/logics related to different systems

Preparation of Functional Specification for DCS/ESD /PLC. Preparation of Instrument Material list

Coordinate activities with Process /piping /Electrical Disciplines.

Review/Checking of design documents like, Junction box wiring, Loop Diagrams, Interface Wiring, Instrument GA’s, Cable Tray Layout, and Cable Schedule.

MTO, instrument Hook-up, Instrument Installation drawings.

Instruments loop checks and simulations according to the loop diagrams.

All engineering/construction related activities for instruments installation, calibration, termination and tubing.

Employment # 3

Worked in Master Enterprises (Pvt.) Ltd as an Electronics and Automation Engineer/Instrument Engineer. (Pakistan)

March 2005 – August 2006

December 2007 – March 2009

Main Responsibilities & Duties

Reviewing P&ID and PFD

PLC programming, Trouble shooting and commissioning (Siemens, Mitsubishi, Allen Bradley and Omron PLC)

Engineering and design for the Control philosophy/logic implementation for different systems.

Completion of FAT’s and SAT’s

MUHAMMAD IMRAN KHAN

SENIOR INSTRUMENTATION AND CONTROL ENGINEER

********.*****.****@****.*** _Page 3 / 5

Technical Training

Application of Explosion Safety and ATEX

Leadership Training Workshop "Leading Generation C"

Application of IEC61511 & IEC61508 SIL classification, SIL verification

T-BOSIET Valid up to 2016

Hydrogen Sulphide Gas Safety & Protection (H2S) Training Internee # 2 (Civil Aviation Authority) CAA

PROJECTS HANDLED

1. Aasta Hansteen Spar Topside Project, Offshore Norway (EPC). Role: Process Control Engineer

Working as a Lead Process control system engineer for commissioning activities. PSD Level Hierarchy drawings plus Legends/typical, PSD C&E, ESD C&E. Preparations of Control narratives for process and utility systems. Development of the SCD’s (System Control Diagrams). Involved in Control system Software FAT’s and punch list clearance. 2. FEED for Port and Berth Infrastructure Phase 2 for Ras Laffan Port Expansion Project Qatar Petroleum, Qatar

Project Description:

Front End Engineering and Design (FEED) for the development of Container Yard facilities, LP Product Berth LPB28/LPB29, Common Facilities LPB30/LPB31, Port Operation Building, Isolation Valves, Leading Light Towers and Canopy area for Ras Laffan Port Expansion project in Ras Laffan.

Role: Instrumentation and Control Engineer

Design Development of Engineering deliverables, Design Basis, Specifications, Data Sheets, Cable schedule, Junction box schedule, Ensure accuracy and correctness of documents/drawings prior to their formal issue for approval or construction, Review inter-disciplinary design documents/drawings.

3. Riyadh Power Plant # 10 - 4,600 MW, EPC Greenfield Project. Saudi Arabia Project Description:

Scope of work for this project includes detail design, engineering, material procurement, quality management, factory inspection/testing, transport and delivery to site, construction, site inspection, testing and commissioning, and all associated works until final handing over of heavy duty industrial package type simple cycle gas turbine generator plant and combine cycle. Role: Instrumentation and Control Engineer

Design of Engineering deliverables, Specifications, Instrument Data Sheets, I/O List, cable routing, Instrument Installation Drawings.

Ensure accuracy and correctness of documents/drawings prior to their formal issue for approval or construction, Review inter-disciplinary design documents/drawings. Internee # 1 (Pakistan International Airlines Corporation) PIA MUHAMMAD IMRAN KHAN

SENIOR INSTRUMENTATION AND CONTROL ENGINEER

********.*****.****@****.*** _Page 4 / 5

Onsite support for construction, installation and commissioning of instrumentation and control systems. Calibration procedures and commissioning/inspection procedures SAT for instrumentation before final handover to the client. 4. Qurayyah Combined Cycle Power Plant - 3,800 MW, EPC Greenfield Project. KSA Project Description:

Scope of work of this EPC contract includes design, supply, installation, erection, health and safety management, painting, commissioning and putting into operation, performance and reliability testing on completion, instruction/training of SEC personnel, and obligations for the defects liability period for the equipment necessary to convert the existing open cycle gas turbine power plant to a combined cycled gas turbine power plant with the provision of water treatment systems including MSF desalination plant, demineralization plant, and chlorination plant.

Role: Instrumentation and Control Engineer

Design Development of Engineering deliverables, Design Basis, Specifications, Data Sheets, Cable schedule, Junction box schedule, On site Calibration procedures for Instrumentation. Commissioning/inspection procedures SAT for DCS- GE Mark VIe. Hot/Cold loop checks for field instruments including online calibration for Pneumatic control valves and MOV's. Technical training for client operators/engineers related to instrumentation and control system. 5. Engineering/Design and Automation Of PU Moulding Plant :- Pakistan Project Description:

Scope of work of this contract includes design, supply, installation, fabrication and commissioning of Polyol urethane plant for a well known foam producing company in Pakistan. Role: Instrumentation and Control Engineer

Mitsubishi PLC FX-Series (FX-2NC) programming and testing. Preparation of design deliverables like functional design specification, system architecture, functional block diagrams, FAT and SAT Procedures, Loop drawings, Cabinet sizing and General Arrangement drawing. Completed Factory acceptance test, SAT and commissioning of the system.

6. Modification Of Cutting line Machines :- Pakistan Project Description:

Scope of work of this contract includes Modification of cutting line rotating machinery about 30 meters long including design, supply, installation, and fabrication and commissioning of the machine.

Role: Instrumentation and Control Engineer

Mitsubishi PLC Q-Series programming and testing.

Preparation of design deliverables like functional design specification, system architecture, functional block diagrams, FAT and SAT Procedures, Loop drawings. Completed Factory acceptance test, SAT and commissioning of the system. Review of Vendor documents/drawings, Issue design documents and drawings for client approval, Ensure accuracy and correctness of documents/drawings prior to their formal issue for approval or construction. MUHAMMAD IMRAN KHAN

SENIOR INSTRUMENTATION AND CONTROL ENGINEER

********.*****.****@****.*** _Page 5 / 5

7. Automation Of Tensile Testing Machine :- Pakistan Project Description:

Scope of work of this contract includes design, supply, installation, fabrication and commissioning of tensile testing machine for quality measurements. Role: Automation Engineer

Siemens PLC S7-300 programming and testing.

Preparation of design deliverables like functional design specification, system architecture, functional block diagrams, FAT and SAT Procedures. Completed Factory acceptance test, SAT and commissioning of the system.

Selection of instruments like load cells and optical encoders for the machine design. 8. Up gradation of Fiber Plant :- Pakistan

Project Description:

Scope of work of this contract includes up gradation of design of Fiber Production Plant. Includes re-engineering PLC logic modifications and implementations using Siemens S7-300 and servo drives.

Role: Automation Engineer

Siemens PLC S7-300 program modifications and testing. Servo drives selection and programming.

Functional block diagrams, FAT and SAT Procedures. Completed Factory acceptance test, SAT and commissioning of the system. Selection of instruments like optical encoders for length measurements in machine design.

PERSONAL DETAILS

Date of Birth: 12th May 1982

Marital Status: Married

Current Location: The Netherlands (Europe)

Contact Mobile No. 003**********

E-mail: ********.*****.****@****.***

************@*******.***

Language: English, Urdu, Arabic, Dutch beginner

Contact this candidate