Engineer Manager

MOHAMED NIYAS.H

No.**,North ayyapuram street,

kadayanallur-627751,

Tirunelveli district

Tamilnadu

.

Contact no: +91-814*******. +91-878*******,

Email ID: *******.******@*****.***

Skype ID: mdniyazs

Objective:

Seeking a position in an organization where my design and testing engineering skills would help to promote the goals and success of organization and make my organization and myself successful.

Academic Qualifications:

Degree

Institution

Board

Year of passing

Percentage

M.E-Mechanical Design

D.Y.Patil College of Engineering,

Pune

Pune University

2013

CGPA=

7.23

B.E.- Mechanical Engineering

B.S.A Crescent Engineering College, Vandalur,Chennai.

Anna University

2008

69%

12th

Masood thaika Hr. sec.school

Tamilnadu State Board

2004

87.4%

10th

Masood thaika Hr. sec.school

Tamilnadu State Board

2002

87.2%

Software Exposure:

CAD Packages:-

Auto CAD

PRO/ENGINEER Creo

CATIA V5

Engine Calibration Software:-

Sparrow Watch A36, A34 and A33

For CNG engine calibration, performance & emission tuning software

Simulation package:-

AVL fire

AVL boost

Pro/Mechanica

ANSYS Fluent

DMU & PLM:-

Teamcenter (Data management)

Vis mockup (JT Visualization, DMU management)

SAP

Experience Summary: Total years of experience- 9.5 Years

9.5 years of core experiences in engineering design & development at Automobile OEM, Engine design, Engine assembly, Engine testing, Vehicle testing and Service. (Break-up as follows);

Nov’2014- till date, 3.5 years, as an Asst.Manager, at Force Motors Limited, (R&D- Engine design, development and Testing, Akurdi, Pune)

May’ 2010 – Nov’2014, 4.5 years, as an Asst.Manager,

at Tata Motors Limited, (ERC, Tata Motors Ltd, Pimpri, Pune).

May’2008 – Oct’2009, 1.5 years, as a Service Engineer,

At George Major (P) Ltd, YAMAHA OBM distributor India

Present Organization:

Currently working in FORCE MOTORS LTD, Pune, Maharashtra, OEM for Auto Manufacture in India, for period of 3.5 years to till date working as a Asst. Manager at Engine Design, development and testing department in RESEARCH AND DEVELOPMENT CENTER (R&D)

Job responsibilities:

Concept planning, Design and developing of components using CATIA V-5.0 and part development and production support for new component development

Concept design of air intake system(Air filter and intake manifold calculation, Turbocharger selection, cylinder head port swirl analysis by using AVL fire software), Crank shaft and flywheel design and crank shaft balancing calculation

Fuel injection design concept and detail design for BS-IV emission norms( injector selection, injector location and injection angle finalization and validation on test bench

Cylinder block, Oil sump, Auxiliary drive (FEAD-AC, PS and alternator belt drive) system structural design and analysis. Validation of these parts on engine test bench and vehicle endurance

Concept design of After-treatment system, DOC,POC,DPF and SCR pressure drop calculation, SCR mixture design of experiment and flow analysis

Proprietary components like water pump, oil pump, thermostat, Air filter, radiator, spark plug, oil filter, EGR cooler, oil separator, chain tensioner, piston. Connecting rod, cylinder head gasket and cylinder liner components were carried out 1000 hrs endurance cycle as per IS10000 in engine test bed and 1lakh kms vehicle endurance.

Interrogates with various department to validate design against the failure mode, DFMEA preparation for sub aggregates. Identify the issues and necessary action taken on design modification on time to full fill the technical requirement.

Supplier drawing and components approval process, DVP(Design validation plan), technical part lists release, Design release (DMN)

CFT (DMU review, CAE feedback, Production support, field visits, Benchmarking) to do a complete product development for engine aggregate.

Engine calibration, performance(MAPS) tuning, fuel economy, emission tuning(ignition, injection timing, after treatment calibration) to meet BS-III,BS-IV, BS-VI norms

Speed limitation calibration, IOBD-II calibration in vehicle level activities to confirm the type approval in ARAI. Support activity for production vehicle in COP (conformance to production) to pass MIDC and ETC(European transient cycle) emission cycle and IOBD-II test for CD and ED route vehicles.

Trouble shooting the DTC(engine diagnostic code) and identify the problems related to sensors(All Temperature,pressure, boost, MAP, oxygen sensors), actuators, throttle body, spark plug, injectors, CATCON (catalytic converter) to meet regular performance and emissions.

Projects handled

5 cylinder Turbo CNG BS-IV engine (TG3250 TCIC) for Tempo traveler (T2) vehicle

4 cylinder natural aspirated (NA) BS-IV engine for tempo traveler (T1), Trax and Trump vehicles

4 cylinder NA diesel BS-III engine converting to Turbo diesel engine for Trax vehicle variants

3 cylinder Turbo tractor diesel TRIM-IIIA engine design and development for premium tractor variant models

Previous Organization-1:

Work experience in TATA MOTORS INDIA LTD, Pune, Maharashtra, OEM for Auto Manufacture in India, for period of 4.5 years to till date working as a Asst. Manager at Engine Design department in ENGINEERING RESEARCH AND DEVELOPMENT CENTER (R&D)

Job responsibilities:

Various engine aggregate component design and development like intake system, exhaust system, cooling system, auxiliary drive system

Involvement in concept planning, Design and developing of 3D models using Pro/engineer-5.0 and prepare Detailed 2D-drawings as per GD & T for respective CAD models

Packaging work for engine components with other vehicle aggregates. Proto part development and production support for new component development

Interrogates with various department to validate design against the failure mode, DFMEA preparation for sub aggregates. Identify the issues and necessary action taken on design modification on time to full fill the technical requirement.

Assemble drawing, clients drawing DVP, technical part lists update in PLM, Design release (DML) in PLM team center.

CFT (DMU review, CAE feedback, Production support, field visits, Benchmarking) to do a complete product development for engine aggregate.

Simulation work for engine aggregate components. Model analysis for engine components by using Pro/Mechanica and CFD simulation of coolant passage and exhaust gas flow for pressure drop optimization by using AVL fire & Ansys fluent.

Projects handled:

New Safari Storme with 2.2l DICOR engine project which improves Safari into major face lift to meet high performance and better outlook .

Integration of 2.2l DICOR engine with Winger vehicle to meet BS4 emission norms.

2.2L DICOR engine on Xenon vehicle With SCR exhaust system to meet EURO-VI emission norms. Pressure drop prediction across the SCR system using AVL- Fire.

Performed 3D CFD study of Intake port Swirl for finding effect of different Turbulence models on Swirling flow. Also, performed correlation between CFD model and measured data of Swirl and Flow

2.2L DICOR Stallion engine integration on Aria vehicle as cost & weight reduction program.

Previous Organization-2:

Work experience in M/s. GEORGE MAIJO INDUSTRIES (P) LTD, Sole Distributer of YAMAHA Outboard Motor, Chennai, for a period of 1.5 Years working as an ASST. SERVICE ENGINEER.

Previous job responsibilities:

Problem identification and rectification of YAMAHA outboard motor.

Sending and receiving market information to and from JAPAN through mail, gathering the evidence and information of Parts Failure Identification.

Participate in technical training, conducted by YAMAHA and provide training to junior mechanics. And organize service campaign twice in a year.

Designing of workshop in various capacity by most efficient and economic way, Attending customer complaints in person or over telephone

Inventory maintains of YAMAHA OBM’s (OEM) spare parts, special service tools and maintaining stock register as well as sales register.

Execution and maintains of workshop in a proper and profitable manner.

Distributing works to the mechanics according to their work capability.

Area of interest:

Automobile engineering

Engine calibration, Engine and vehicle testing

1D & 3D simulation for engine component optimization

and development .

Computer aided design

General skills:

Team Player

Determination

Hard Works

Personal Profile:

Father name : Haja Mohamed sait.A.

Mother name : Mumtaj.M

Date of birth : 17-02-1987

Gender : Male

Permanent address : 51,North ayyapuram street,

Kadayanallur-627751

Tirunelveli (dt)

Languages known : English, Tamil, Malayalam, Hindi, Marathi

Nationality : Indian

Hobbies : Driving car, Cricket

Place: Pune (H.MOHAMED NIYAS)

Contact this candidate