Clint Moore

**** ********* ****

Oakland, Ca ****5

Cell Phone: 760-***-****

Email: ac2y7t@r.postjobfree.com

Career Summary

Electrical Engineer with 20+ years of experience in design, engineering, procurement, project management, and project commissioning, I have supervised, and coordinated various stages Fire System detection and control, (LNG) Liquefied Natural Gas, (CNG) Compressed Natural Gas, Medical Equipment Validation, Wastewater Treatment Plant, Chemical Distillation Systems and Reverse Osmosis Systems. I have provided work breakdown structure of estimates hours, I have submitted engineering proposals, planning and scheduling support for engineering deliverables. My Engineering experienced consists of Electrical Design, engineering procurement, electrical calculation, MV & LV power system, and distribution systems. I understand working knowledge of customer specification, and order requirements with includes equipment datasheets, specifications, material requisitions, technical bid evaluations, customer document review, and customer (FAT) factory acceptance testing. My experience also consists of Electrical layouts, P&ID diagrams, relaying schemes, breaker wiring & schematic diagram and protection logic diagrams, MOV wiring & schematics, EHT and panel schedules. I am experienced in IEEE, NEMA NFPA, NEC, ATEX, CE, and CSA.I have experience in six sigma and CAPA with good verbal and written communication which includes presentation skills.

Objective: To utilizes my skillset as an Electrical Project Manager, Electrical Design Manager,

EDUCATION AND PROFESSIONAL DEVELOPMENT

Bachelor’s Degree in Technical Management, DeVry University (2010)

Associates Degree in Electronics and Computer Technology, DeVry University (2008)

PROFILE

2017- Present Energy Recovery Inc San Leonardo, CA

Electrical Engineer Manager – R&D

•Severing as Electrical Designer / Electrical Project Manager on multiple projects with a $700k budget that in entails installation of Medium Voltage Drive, Multi Stage Switch with Kurd key, 1000 hp motors, with controls.

•Ensured all required updated for electrical designs on R&D test loop, which consist of analog control valve, pressure transmitters and a backup system.

•Standardized on HMI interface design for all product design to reduce programming time.

• Install electrical safety standards according to NEC and OSHA.

•Provided direction on electrical design and control to ensure objectives are met according to narrative functional design.

•Ensure all electrical design are delivered on time, and also ensuring redlines make it back into the system for verification.

•Provide updates in our weekly engineering meeting to determine resource allocation.

•Provide supervision on IQ/OQ to ensure proper operation of the all device.

•Design shutdown table for temperature, pressure, flow failures.

•Design risk mitigations table that align with system PID and Electrical schematic

2014 – 2016 ROC Industries, INC Escondido, CA

Electrical Application Manager – Oil & Gas

•Accomplishing Electrical Engineering human resource objectives by recruiting, selecting, orienting, training, assigning, scheduling, coaching, counselling, and disciplining employees; communicating job expectations; planning, monitoring, appraising, and reviewing job contributions; planning and reviewing compensation actions; enforcing policies and procedures

•Achieves Electrical Engineering operational objectives by contributing electrical engineering information and recommendations to strategic plans and reviews; preparing and completing action plans; implementing production, productivity, quality, and customer-service standards; resolving problems; completing audits; identifying trends; determining administrative system improvements; implementing change.

•Develops strategic for Electrical plans by studying operational plans; this is done by studying existing conditions; determining needs to accomplish operational plans; mapping solutions; updating and modifying requirements and solutions; preparing cost estimates and budgets.

•Review and check all assigned project electrical installation drawings for compliance with all company and project instructions (One-line diagrams, electrical equipment location drawings, plan drawings, details, schematics, wiring diagrams, etc.) of technical vendor submittals for installation requirements

•Providing direction on National Fire Protection Association, which includes NFPA 72, NFPA 12, and NFPA70 are followed through the build process.

•Coordination of activities between the cross-functional team and design team that facilitates creation, review, and release of Product Requirements.

•Directed Electrical ECO and EIR process to ensure completed within required deadlines.

•Ensured the overall procurement process of detection and control devices.

2012 – 2014 GP Strategies Escondido, CA

Senior Electrical Controls Engineer – Oil & Gas

Provided direction on design document for substations projects which includes Elementary diagrams, Wiring Diagrams, Elevations, and Bill of materials with the implementation of AutoCAD Electrical.

Prepared and reviewed detailed single line diagrams, control schematics, protection & control logic diagrams, and AC/DC load calculations to ensure design followed specification.

Provided communication for internal and external designs for NEC code compliance to ensure good work practices design practice.

Lead first article review process on protection & controls, hazardous equipment selection for Class 1 Div. 1 and Zone 0, 1.

Prepare general arrangement plans, conduits, cabling, grounding and control panel layouts using NFPA 52, 70, 72,79, CSA and UL 508A

Lead Engineer on Implementation of LNG dispenser Design of PCB which generated 2.5 million in revenue.

Ensure all (FAT) provided the customer with the required functionality, and ensured all redlines with through ECO process.

Ensure all Power flex 700, 70 and Power flex 525 VFD were install, program for startups.

Ensure all HMI were install and programmed such as Red lion, and Rockwell Panel view plus.

Install and programmed Compact logic, RSlogix 5000, SLC 500, Micro logics, and PC board programming.

I have working knowledge of transformers, high/low voltage breakers, air breakers, CT’s, circuit breakers etc.

I have experience in programming PLC’s HMI monitor VFD motor controllers using Allen Bradley Rsview, Studio 5000, and Rslogix 500

2008 – 2012 Abbott Vascular Temecula, CA

Lead Validation ME (CEP) Compliance Execution Group – Medical

Written, validated Equipment Qualification Protocols (EQP’s), provided direction on functional operation, and tolerance specification by User Requirement Specification (URS).

Assisted in the Equipment Qualification Phase in Clonmel, Ireland which verified the functionality and operation of equipment.

Experience in process equipment, development and validation using (IQ/OQ/PQ).

Identification and implementation of engineering projects to reduce costs, improve yields and efficiencies, while insuring world-class quality.

ECLC Equipment Qualification and Reports, Design, Assessment, and Traceability using the 3 C’s.

Provide statistical reports on downtime, equipment failure by providing diagnostic.

Provide Electrical, Mechanical support to Equipment Development for Production.

Have working knowledge 21 CFR 820.70g- Specified Requirement, 21CFR 820.72a- Measures and Testing and 21 CFR 820.70i – Automation process

I have the understanding of Engineering Change orders, documentation process.

Have a working Knowledge of the (CAPA) Corrective Action and Preventive Action system in which I have lead the initial investigation.

Having a good understanding of Continuous Improvement processes which allows for removal of waste within design process.

Having knowledge of A3 reports using the 5 M’s, Fish bone and Pareto charts.

2000 – 2008 Air Products Chemicals Carlsbad, CA

Controls Engineer / Programmer – Semi- Conductor

Knowledge of National Electrical Code (NEC), National Fire Codes (NFPA).

Control Panel Design,

Installation of Programmable Logic Controllers (PLC), for Distillation process.

Using SAP for procurement of equipment and monitoring engineering projects

Using Human Machine Interface (HMI), Wonderware software for monitoring system process, alone with RS view and Lab View.

Working knowledge of Microsoft SQL 7.0 and SQL 2000 operating system for logging moisture data from the container drying system.

Working Knowledge of Microsoft Windows 2000 and XP operating system.

Working Knowledge of IT Network Design and Network Management.

Draw schematics (AutoCAD Mechanical and AutoCAD Electrical).

Have understanding Analog, Digital Instrumentation Calibration.

Integration of General Monitors MC600 Oxygen and Hydrogen Monitoring system.

Utilization of Ametek 5830, Panametrics MII series analyzer for moisture reference.

Understanding FMEA and Apollo Root Cause Analysis.

Programming SLC 500 PLC using RSlogix, Emulator, Rsview

1995 - 2000 Structural North America Escondido, CA

Project Coordinator / Controls Engineer – Pressure Vessel Manufacture

System Integration with the use of Programmable Multi Axis Card (PMAC).

Working Knowledge of ENTEC Multi Axis Winding Machine.

Experience with Omron’s Touch Screens 600 NTM and 600 NTS interface.

Programming Code with the use of Omron’s CVSS program.

Electrical Documentation with the use of Construct software and Auto Cad 2000.

Coordinating Plant Start-up in Goa, India which increased profits by 1.2 M.

Implementation of control documentation with ISO 9000.

Machine Safety, Protective Measures, Theory, and Legislation.

Plant Utilization with Demand Flow Technology.

Redesigning Internal Heat process to reduce downtime by 15%.

Working Knowledge of Load Cells calibration (tension and compression).

Coordinating plant relocation from Escondido, California to Chardon, Ohio.

Working knowledge positioning devices such as encoders and resolvers.

References: Available upon request

Certifications

Abbott Quality College – CAPA Initiator /investigator, Yellow Belt – Continuous Improvements, Delta Tau Data Center – Programmable Multi Axis Controller, Yaskawa – Sigma Servo, Omron Electronic – C-series, Wonderware Corporation – Intouch - Advanced 7.1, Wonderware – InSQL, Demand flow Area layout.Airco Technical Institute – Computer Aid Drafting, Mechanical and Electrical design,George Washington University – Project Management, American Heart Association – First Aid CPR AED

Naval Citations

Aviation Readiness Evaluation – Upgrading aviation electrical systems

Generators preparedness – Ensuring that ships 400 Hz motor generators electrical safety issues were identified and corrected.

Awards

Business Excellence – For execution and planning 173 Equipment Qualification Protocols in Clonmel, Ireland.

Chicago Museum of Science and Industry – For Craftsmanship design.

Contact this candidate