Dear Sir:

I am attaching my resume for your review.

As you will see, I have a Master’s degree in Mechanical Engineering with good knowledge and background in science and years of hands-on experience, including R and D, new product development, existing product improvement, technical support in manufacturing and quality controls processes, as well as project management in engineering and manufacturing fields, including in medical device industry, aerospace industry and testing equipment manufacturing.

I am U.S. Citizen.

Please feel free to contact me at E-mail: ac2rg2@r.postjobfree.com and/or 845-***-**** should you have any questions.

Thank you very much for your consideration.

Sincerely,

Yan Peng

Yan Peng

E-mail: ac2rg2@r.postjobfree.com Phone: 845-***-****

Education

9/1988 - 6/1991

Master of Science in Mechanical Engineering

College of Engineering, Northeastern University, Boston, MA 02115

- GPA 3.77/4.0

- Thesis: “Analysis of Adhesively Bonded Composite Joints with Voids and Thermal Mismatch” (NASA supported project, the article being published on MD-Vol.29, pp259-268, ASME 1991)

3/1978 - 1/1982

Bachelor of Science in Mechanical Engineering

College of Engineering, Southwestern Jiaotong University, Chengdu, Sichuan, P. R. China

- GPA 3.9/4.0

- Honors: “Outstanding Student” being titled three times in four academic years

Training Certificates/Courses

- Electromagnetic Principles. Magnetic Analysis Corp., Elmsford, NY 10523, April, 2013

- SolidWorks. R and D Technology, Milford, Connecticut 06460. July, 2003

- Plastic and Polymer Extrusion. Plastic Manufacturing Center, Pennsylvania College of Technology (PCT), Williams Port, Pennsylvania 17701. August, 2000

Publication

J. N. Rossettos, Y. Peng and H. Nayed-Hashemi, " Analysis of Adhesively Bonded Composite Joints with Voids and Thermal Mismatch ", Plastics and Plastic Composites: Material Properties, Part Performance and Process simulation, MD-Vol.29, pp259-268, ASME 1991

Work Experience

1/2013 – present

Project Engineer, Magnetic Analysis Corp., Elmsford, NY 10523

ISO 9001-2008 Certified Company

Working for a leading designer and manufacturer of NDT (non-destructive testing) testing equipment industry.

- Involved in multiple new product development projects from concepts to completion, including timeframe control, cost control, design reviews, prototype evaluation, and pre-production run.

- Perform detail 2D and 3D design works with SolidWorks.

- Involved in continuous improvement of redesign and modifications on the existing products to increase product quality, production efficiency and reduce cost.

- Document control of ECOs, BOMs.

- Technical support in manufacturing process, including troubleshooting/problem solving, design mold fixtures, create Working Instructions (WI), oversee assembly works.

- Sourcing multiple domestic and international vendors/suppliers through entire development processes.

9/2004 – 12/2012

Project Engineer, Aktina Medical Corp., Congers, NY 10920

ISO 13485 Certified Medical Device Company

Working for a leading designer and manufacturer of quality medical accessories and treatment systems in the field of radiation oncology for CT Scanner and Linear Accelerator (LINAC).

- In charge of multiple new product development projects from concepts to completion, including cost control, timeframe control, design reviews, oversee First Article and pre-production run per ISO 13485 and QSR (Quality System Regulation).

- Perform detail 2D and 3D design works with SolidWorks.

- Create test procedures/plans of research approaches for new developments, perform verification and validation tests through entire development process per FDA regulations.

- Perform Continuous Improvement to increase product quality, production efficiency and reduce cost.

- Working closely with QA manager in Regulatory Plan, Standard Compliance, SOP (Standard Operation Procedures), Risk Management and document control per FDA regulations. Document control of ECOs, BOMs.

- Oversee quality control and inspection processes. Manage non-conformance activities, review and approve NCR (Non-Conformance Report). Create Working Instructions (WI) for quality control group. Technical training quality control group for knowledge of GD&T. ASME Y14.5, and 3D CMM (Coordinate-Measuring Machine) applications and data analysis.

- Technical support in manufacturing process, including verification and validation tests, design mold fixtures, troubleshooting/problem solving, create Working Instructions (WI) and assembly procedures, oversee assembly works.

- In charge of Failure Analysis Reports to QA manager and company VP per FDA regulatory requirements.

- Sourcing multiple vendors and suppliers through entire development processes.

1/2001 - 9/2004

Project Engineer, Novatronics Pickering Controls, Inc.

200 Terminal Drive, Plainview, NY 11803 (ISO 9001 and AS9100 Certified Company)

Working for a worldwide leading manufacturer of electro-mechanical control devices for aerospace industry.

- In charge of multiple new product development projects from concepts to completion, including timeframe control, cost control, design reviews, oversee First Article and pre-production run.

- Perform detail 2D and 3D design works with SolidWorks.

- Redesign and modify the existing products to increase product quality, production efficiency and reduce cost.

- Technical support in manufacturing process and assembly group, including troubleshooting/problem solving, design mold fixtures, create Working Instructions (WI) and training production technicians, oversee assembly works.

- Document control of BOM and ECN/ECR.

- Sourcing multiple vendors and suppliers through entire development processes.

2/1998 -1/2001

Project Engineer, Engineering Dept., Multiplier Industries Corporation

135 Radio Circle, Mt. Kisco, NY 10549 (ISO 9001 Certified Company)

Working for high-volume electro-mechanical manufacturing environment.

- In charge of multiple new product development projects from concepts to completion, including cost control and timeframe control, review and evaluate First Article and pre-production run in the high volume electromechanical device manufacturing environment.

- Perform detail design works with AutoCAD.

- Redesign and modify the existing products to increase product quality, production efficiency and reduce cost.

- Review and approve design drawings including international venders’ and suppliers’ drawing for accuracy.

- Create product assembly procedures for Production Department. Technical support in manufacturing process. Oversee pre-production runs, troubleshooting/problem solving and training production supervisors, oversee assembly works.

- Document control of BOM and ECN/ECR.

- Sourcing multiple domestic and international vendors and suppliers through entire development processes.

Skills and Abilities

Engineering and Project Management Abilities

- Years’ experience of managing product developments projects and technical support in manufacturing processes.

- Knowledge and experience of machine shop fabrication processes. Familiar with major machining processes and material applications, such as CNC machining, coating, plastic injection, casting, etc.

- Years’ experience in engineering fields including in R&D, new product development, existing product improvement, troubleshooting/problem solving, and technical support in manufacturing and quality control processes, as well as project management.

- Familiarity with the International Standards Organization (ISO) and the American National Standards Institute (ANSI), IEC standards, including Geometric Dimensioning and Tolerancing (GD&T. ASME Y14.5).

- Knowledge of medical device processes under FDA regulations including 510(k) and MDD (Medical Device Derivatives) regulations.

- Knowledge of qualification control in production process (IQ, OQ and PQ).

- Knowledge of Failure Mode and Effects Analysis (FMEA) method in design and development process.

- Knowledge of AMS (Aerospace Material Specifications) standards.

- Years’ experience and capability of problem solving skills.

Mathematics, Science and Computer Skills

- Knowledge of major mathematics including calculus, linear equations, geometry and trigonometry, statistics, etc.

- Knowledge of kinematics, dynamics, material properties, structural analysis and mechanical vibration, etc.

- CAD software: 2D and 3D design with AutoCAD and SolidWorks.

- Proficiency with Microsoft Office Package (Words, Excel, Project, PowerPoint)

References Available upon request

Contact this candidate