Jinfeng Wu PE/Ph.D

**** ******** **

Phone: 832-***-****

Sugar Land, TX 77479

Email: ac2jen@r.postjobfree.com

PROFESSIONAL SUMMARY

Professional Engineer (PE) in Mechanical Engineering, registered in the states of Texas (License No: 111797) and Michigan (License No: 620*******).

Senior Mechanical/Process Engineer with over fourteen years of experience in the design of power plants, refineries, LNG, LPG, Gasification, as well as chemical plants; Specialization in: development of unit design basis and philosophy, Process Flow Diagram (PFD) and Piping and Instrument Diagram (P&ID) development, piping design, design calculations (Hydraulic and pressure relief analysis), process simulation, equipment sizing and datasheet specification, process control and optimization; With deep understanding of Heat and Material Balance, heat exchanger, vessel, tank, pump, compressor, valve, piping;

Over eight years of experience in research in the fields of computational fluid dynamics (CFD) and heat transfer.

A team player with strong problem-solving skills with a desire to learn new technologies.

Working knowledge of ASME, ANSI, API, OSHA, ASHRAE (HVAC&R).

CAREER HISTORY

Bestwater USA, Inc (2017)

Project Manager

Fuyao Automotive North America (FANA) Project – Plymouth, Michigan

oParticipated in the system design of cooling water (CW), soft water (SW). Responsible for on-site piping routing and support/hanger design and installation of CW, SW and compressed air, as well as equipment installation, such as cooling towers, tanks, pumps. In charge of scheduling and monitoring the progress of engineering and construction activities, and coordinating with FANA.

Self Employed (2016)

Consultant

Shenhua Energy Group – Wangqu Power Plant FGD Revamp Project- Shanxi, China

o Reviewed, commented on proposal and provided technical advices, such as spray tower absorber size, O/S ratio, residence time, oxidation method in the Wet FGD system design.

SK E&C, USA Inc. (2010 - 2015)

Sr. Process Engineer

Standard and Procedure Development

o Responsible for establishing the following in-house procedures and templates: process unit design basis, line list, Boil Off Gas (BOG) compressor calculation (LNG / LPG application), storm water sump pump sizing, backwash/filtered water sump and pump sizing, lift station, water storage tank and fuel pressure sphere storage calculation. Participated in the preparation of depressurization philosophy based on API 521 and licensors’ experience.

o Work knowledge of the following practice: process design criteria, gas plant, flare design, waste water treatment, vent

and drain, blow down and pump out, line and pump sizing, pressure relief analysis, vessel sizing.

Light Crude Oil Processing Refinery

oReceived training on Pro/II simulation tool. Developed Process Flow Diagrams (PFD) including distillation column and a series of heaters and pumps to reflect process simulation; accomplished process design basis, process description for Crude Distillation Unit (CDU).

North American Polypropylene Project – Alberta, Canada

oCompiled Project Isolation Philosophy to safeguard the proposed plant, and developed various process equipment datasheets based on licensor’s information, such as cycle gas compressor, vent recovery compressor, raw material purification vessels, and heat exchangers. Prepared waste effluent summary including fugitive emission from

valves and PSVs, spent catalysts.

Pembina Propane Terminal – Portland, Oregon/Prince Rupert, Canada

oResponsible for Basic Engineering Design Data (BEDD) covering site conditions and Design Basis Memorandum including rail car unloading logistics, chilling unit, storage and ship loading facilities.

oAssumed responsibility of utility design including: Instrument Air, Nitrogen, Natural Gas, Potable Water, and Sanitary Waste Treatment. Participated in HAZOP.

o

Jinfeng Wu PE/Ph.D

6810 Dunvegan Ln

Phone: 832-***-****

Sugar Land, TX 77479

Email: ac2jen@r.postjobfree.com

Magnolia LNG Project – Lake Charles, Louisiana

oResponsible for designing the mixed refrigerant makeup system to liquefaction unit: Ethane Storage and Molecular Sieve Dryer, Butane Storage and Molecular Sieve Dryer. Assisted designing Combined Heat and Power unit.

oIn charge of the following systems: Plant and Instrument Air (air compressor, dryer, receiver, distribution system) and Nitrogen with two levels of purities (Nitrogen PSA generator, liquid nitrogen tank, ambient air vaporizer,

receiver, and distribution system). Optimized these systems to reduce air compressor capacity.

o Working knowledge of the overall liquefaction process, gas turbine driven compressor and its auxiliary systems.

Lake Charles Clean Energy Project – Lake Charles, Louisiana

o Participated in the designs of Gasification unit, Power Generation and Steam system.

oResponsible for the designs of Demineralized Water System (ultrafiltration, reverse osmosis, mixed bed ion exchanger), Fuel Gas and Natural Gas System (metering station and pressure reduction package, knock out drum and distribution system), Plant and Instrument Air System (rotary air compressor, dryer, receiver and distribution),

and Nitrogen Distribution System.

Refinery and Petrochemical Complex of the Ecuadorian Pacific – Manabi, Ecuador

oParticipated in the designs of Alkylation and Isomerization Units by developing P&IDs, heat exchanger datasheets, and designing unit utility P&IDs, unit flare system (header sizing, knockout drum, pump). Developed Global

Water Balance, Demineralized Water System, Steam and Condensate System, Boiler Feed Water.

oWorking knowledge of Seawater and brackish water reverse osmosis packages, potable water remineralization system. Exposure to hydrogen plant, naphtha reformer, sulfur recovery units.

Process Lead

PACO Power Plant Project – Minera, Panama

oLed the efforts to review and comment on all the documents related to process, which includes P&ID’s, Heat and Material Balance, equipment layout, piping sizing and thickness calculation, piping routing, major equipment specifications and Technical Bid Evaluations, as well as vendor data (Steam Turbine, Boiler, Condenser, SCR, Flue Gas Desulfurization, Baghouse, Boiler Feedwater Pump, Condensate Pump, Coal/Ash handling, Mechanical Vacuum Compression (MVC) Desalination system, Demineralized Water, Waste Water Treatment,etc.)

oProvided clarification to PMT, vendors, and subcontractor (Sargent & Lundy), and kept PMT to be aware of the critical issues, e.g. heat rate guarantees, subcontractor’s the deviations from Functional Technical Specification. Participated in plot plan and 3D model review meeting, HAZID, etc.

CDI Engineering Solutions (2007 – 2009)

Lead Mechanical System Engineer – Peak Sun Silicon Tribromosilane Pilot Plant – Oregon

Responsible for managing all activities within Mechanical Systems scope including: P&ID development, hydraulic calculations, pressure relief analysis, budget, and schedule.

Mechanical System Engineer – Silfab Trichlorosilane Project / KMYY Trichlorosilane Project / LDK Trichlorosilane Project – Italy, China

Developed Piping and Instrument Diagrams, performed line and pump hydraulic calculations and performed pressure relief analysis.

Consultant Engineer – NHUMO Project – Tamaulipas, Mexico

Provided technical support to high value engineering center for boiler and turbine specifications and heat and material balance calculations

Jinfeng Wu PE/Ph.D

6810 Dunvegan Ln

Phone: 832-***-****

Sugar Land, TX 77479

Email: ac2jen@r.postjobfree.com

Northwest Electric Power Design Institute, Xi’an, China (1992 - 1999)

Mechanical Engineer

On power generation EPC projects, proposed mechanical schemes, heat material balance, and made equipment selections /specifications; prepared piping & instrument drawings; routed piping and performed thermal design and hydraulic calculations; conducted piping thermal stress analysis and designed piping supports for preliminary design and detail design phases.

oSargent & Lundy Engineering Cooperation, Chicago, Illinois (03, 1995 – 11, 1995)

As a joint-venture engineer, participated the project of Ligang Power Plant (2X350 MW). Majored in 3D modeling turbine building, piping & instrument drawing development and piping routing.

oLigang Power Plant (2X350 MW), Jiangsu, China (05, 1996 – 05, 1997)

Prepared and issued mechanical construction drawings on site; Resolved engineering and design issues with Owner’s engineer; Assisted Technique Field Assistant to perform all mechanical discipline activities to facilitate the project.

EDUCATION

Ph.D in Mechanical Engineering - Heat & Mass Transfer, August, 2007 University of California at Los Angeles, Los Angeles, California

Master of Science Degree in Mechanical Engineering, May, 2001 Villanova University, Villanova, Pennsylvania

Bachelor of Engineering in Thermal-Energy Engineering, July, 1992 Wuhan University of Hydraulic and Electric Engineering, Wuhan, China

PUBLICATIONS

Journal Papers:

J. Wu, V. K. Dhir, “Numerical Simulations of Dynamics and Heat Transfer Associated with a Single Bubble in Subcooled Boiling and in the Presence of Noncondensables,” Journal of Heat Transfer, Vol. 133, pp041502-1 – 041502-14, 2011.

J. Wu, V. K. Dhir, “Numerical Simulations of the Dynamics and Heat Transfer Associated with a Single Bubble in Subcooled Pool Boiling,” Journal of Heat Transfer, Vol. 132, pp11501-1 – 11501-15, 2010.

Y. Nam, J. Wu, G. Warrier, S. Ju, “Experimental and Numerical Study of Single Bubble Dynamics on a Hydrophobic Surface,” Journal of Heat Transfer, Transactions of ASME, December, Vol. 131, pp121004-1 – 121004-7, 2009.

J. Wu, V. K. Dhir, J. Qian, “Numerical Simulation of Subcooled Nucleate Boiling by Coupling Level-set Method with Moving Mesh Method,” Numerical Heat Transfer, Part B, Vol. 51, pp535-563, 2007.

OTHERS

Coursera Certificates: Machine Learning (License 5ANXSMR3KYUS); Wind Energy (License ZH9LTC2WLD8K); Organic Solar Cells (License 2CPPHVTUTY7P); Data Processing Using Python (License 3J83LVTNU7PS).

Computer Skills: Hysys, Hysys Heat Exchanger, Pro/II, Microsoft Office Suite, AFT Fathom, AFT Arrow, AutoCAD, FLUENT, Fortran, C++, Python, Mathcad, Matlab, Autodesk Inventor/Simulation CFD, Caesar II.

Contact this candidate