**** ****** **** **. *****: 337-***-****

Houston, Tx. 77095 ac2evg@r.postjobfree.com:ac2evg@r.postjobfree.com

Quality: Inspector/ Supervisor/Coordinator

Summary

●Strong background in manufacturing and third party vendor surveillance.

●Strengths in quickly learning new processes, technologies and machinery.

●Detail-oriented, adept at interpreting blueprints.

●Skilled in final assembly processes, FAT’s (Final Acceptance Test) small & large parts assembly.

●Knowledgeable in ASTM specifications, API specifications, AWS D1.1 procedures, Non Destructive Examination methods

Experience

CB&I From: Mar. 2017- present

(QA Technician)

30103 Sunland Drive

Walker, La 70785

●QA MTR checkout on all pipe verifying that all documented heat numbers on sketches/drawings have a material test reports and the material has been allocated for the proper job.

●Coordinate with QC inspectors when needing assistance correcting MTR’s that may not be searchable on server.

●Update Material Discrepancy log with any discrepancies that may be found with MTRs and emailing proper persons of its added information.

●Place parts on HOLD STATUS in IDOCS Document & Workflow Manager when information is needed for MTR’s or that cannot be accessed on the company server.

●Review the Process Control Points (PCPs) in order to identify witness, monitoring, and documentation review points for all stages of the manufacturing process.

●Vendor surveillance inspection at pipe manufacturers making sure that the pipe and steel, which is being supplied by manufacturer, is in line with the required standards and requirements.

●Coating surveillance assures clients that the application of their coating systems is in compliance with the required specifications, codes, and standards

●Track activities, including the tracking of defects rates and the actions taken for rejected items.

●Assures clients that the pipe or steel being produced for their project is in line with the necessary requirements and standards. Witness, review and document manufacturing and mill inspection and prepare weekly status reports for submittal to the client.

●Material Traceability Verification, Production Surveillance, Hydrostatic Testing Surveillance and Visual & Dimensional

Relevant Solutions From: Feb. 2015 - Dec. 2016

(Quality Manager)

14910 Henry Rd

Houston Texas, 77060

Supervisor (Candace Rodrique)

•Develop, implement, communicate and maintain a quality plan to bring the company's Quality systems

Policies into compliance with quality system requirements

•Evaluated MTR(s) via customer drawings or other noted documented sources, reviewing chemical analysis, tensile strength, hardness, etc. and documenting

•Ensure test and procedures are properly understood, carried out and evaluated and that product modifications are investigated if necessary

• Assign incoming MTR(s) specific numbers for traceability, record information into MTR log. Scan and save MTR(s) in specified folders on Company server

•Setting up and maintaining controls and documentation procedures

•Survey Customer data book(s) documentation for accuracy and organization

•Develop, implement, communicate and maintain a quality plan to bring the company's Quality systems and policies into compliance with quality system requirements.

•Plan, direct or coordinate quality assurance programs and formulate quality control policies

•Responsible for overseeing day-to-day test preparation and execution activities

•Prepare and update quality documentation, basing their processes on a recognized standard such as ISO 9000

•supervise teams of inspectors who carry out the detailed assessment of products and their components at different stages of production

•Attend Pre production meeting to discuss Quality support required testing needed company quality policies and work instruction and review customer’s ITP ( Internal test plans) and meet customer’s third party quality inspectors

•Ensures that incoming components and materials will comply with the manufacturer’s quality standards, minimizes the time and cost of inspection, and contributes to the quality of the finished product.

•Develop and monitor continuous improvement programs, aiming to reduce the number of defects and improve levels of quality

Plasma Coatings Houston From: Apr. 2014 – Dec. 2014

(Quality Supervisor)

14100 Westfair East Dr.

Houston, TX 77041

Supervisor (Kenny Martin)

281-***-****

Data Book review

●Critique data book(s) verifying documentation is accurate and existing.

●Collaborate with ABS (American Bureau of Surveyors) ABS review and approval required for data book(s).

Regulated Non Conformance Report(s) (NCR’s) and parts

●Dispositioning of incoming NCR(s) from Quality Inspectors, Customers, and Vendors.

●Cogitated with Engineering, Quality Inspectors, And Customer Reps. with Deviation Request.

●Generated Rework router(s) commands to correct non conformances, add to company database.

Examined Material Test Reports (MTR’s)

●Evaluated MTR(s) via customer drawings or other noted documented sources, reviewing chemical analysis, tensile strength, hardness, etc. And documenting.

●Assign incoming MTR(s) specific numbers for traceability, record information into MTR log. Scan and save MTR(s) in specified folders on company server.

Control Welding Information

●Prepared Procedure Qualification Records (PQR) and welder information for welding test and delegated welding coupons to testing lab.

●Maintained Welder Qualification Records (WQR), and welder continuity log, and welder test results

●Contact company approved vendors to validate, calibrate all shop tools and document

GE oil and Gas (Contract job) From: Oct. 2013 - Feb. 2014

(Quality Document control specialist)

12221 N. Houston Rosslyn

Houston, TX- 77433

504-***-**** (Kevin Sapp)

Managed and review customer data book(s)

●Survey Customer data book(s) documentation for accuracy and organization.

●Examine NDE reports, for signed reports, part numbers, serial numbers, heat number, PO #’s, ABS, DNV signatures.

●Use Oracle system to find missing or updated documents needed in data books.

●Use ITP (Internal Test Plan) as indicator of which documents are needed for data book.

Baker Hughes Incorporated From: May 2013 - Oct. 2013 (Quality Control Inspector) 1100 Baker Hughes Rd, Broussard, La. 70518 337- 364-2015 (Seth Abshire)

Drill tool Wear Inspection

●Measure, and record the dimensional and visual attribute data of critical components.

●Visually inspect used completions & production rental tools returning from job site for commonly occurring defects and nonconformance items to determine current condition, physical characteristics and its fitness for further service

●Archive records of completed wear inspection in system and/or per local document retention policies

●Initiate new document request, when a wear criteria inspection sheet does not exist for the given product family.

●Ensure all recommended measuring devices are calibrated as necessary.

●Perform wear criteria inspection as per product line testing and inspection requirements.

●Facilitate changes to the wear criteria inspection sheet master templates and wear limits therein

●Thread identification, gauging & inspection

●Photographs of damaged materials taken for recordkeeping purposes.

●Defects reported in the specific product line inspection report.

●Initiate DWR’s (DEVIATION/WAIVER REQUEST) for products that does not meet wear inspection criteria.

TOOLS used for Wear Inspection:

Metric OD Micrometer, Depth gauge, Tri micrometer, Blade type micrometer, Dial calipers, Comparator, Metric Dial Calipers, Imperial OD Micrometer…

Superior Derrick & Equipment From: Oct. 2012 - April 2013

(Quality Control Inspector)

4615 Port Rd, New Iberia, LA 70560

337-***-**** (Tasha Ramisetti)

Verify all specified inspection and test

●Any required upon receipt of material and in-process, have been carried out and the results are acceptable prior to releasing any assembly or product.

●Visually, photographing and noting any design change recommendations. Look for any flaws found that may require revisions of drawings.

●Visually and dimensionally inspect each piece per fabrication drawings, verify material fitting and ready for welding.

Verify welds meet the drawing requirements and acceptable

● API Specification and AWS D1.1 requirements.

●Visually examine, and call out approved NDE service provider.

Detecting non-conformance, identifying the nonconforming item(s)

●Initiating non-conformance reports, maintaining non-conformance log.

●Evaluating non-conformance for proposed dispositions and corrective actions, and verifying final corrective actions and dispositions of non-conformance.

Loadmaster Derrick & Equipment From: Mar. 2007 - Oct. 2012

(Quality Control Consultant/Dimensional Inspector/ Welding Inspector/ Quality project coordinator)

1048 Cruse Ave, Broussard La. 70518 337-***-**** (Nathan Cormier)

Assists project coordinators and customer representatives on all project final acceptance test (FAT's).

●Perform Category 3 & Cat (4) inspections of derricks that required those particular inspections- Making sure all phase are completed according to procedures

●Inspect product visually, photographing and noting any design change recommendations. Look for any flaws found that may require revisions of drawings.

Receiving inspector

●Perform initial inspection of material/prior to allowing shipper to off load- load from truck carrying material.

Ability to use various measurement & test equipment

●Ultra sound thickness gauge to check material thickness, Dry film gauge thickness to check paint mills, hardness tester to check unknown material hardness. Tape measures, Tri-Mics, Dial calipers, Depth Gauge, OD & ID Mics.

●Verify that components inspected and accepted or rejected have the proper acceptance status indicators and/or the associated process control documents showing their inspection status.

Implementing and maintaining the Non-conformance control system (NCR).

●Include detecting non-conformance, identifying the nonconforming item(s)

●Initiating non-conformance reports, maintaining the non-conformance log, evaluating non-conformance for proposed dispositions and corrective actions, and verifying final corrective actions and dispositions of non-conformance.

Fitting inspection

●Visually and dimensionally inspect each piece per fabrication drawings

●Verify material has been fit up and ready for welding

●Ensure that all pieces/ components are cut to correct dimensions(s). Confirm that components have weld symbols, correctly identified with assembly part numbers, job numbers.

Weld Inspection & Welding Procedures

●Verify welds meet the drawing requirements and are acceptable per API Specification and AWS D1.1 requirements.

●Visually examine, and call out approved NDE service provider.

●Set up & monitor welding test, and that all welding is done to approve procedures.

Inspection, Measuring and Test Equipment Procedures

●Responsible for implementing and maintaining the IMTE control system.

●Assigning and controlling identification numbers.

●Collecting and recalibrating IMTE and calibration equipment standards.

●Identifying and documenting non-conformance.

Monitor Third Party NDE Inspection

●Familiar with NDE procedures

●UT, MPI, Dye Penetrant, X-ray, Load testing, Pressure testing, making sure that all equipment used has been calibrated.

Assisted with internal auditing and the writing of ITP’s (Internal Test Plans) and that ITP’s are monitored and carried out to meet customer deadlines.

DATA Book(s)

●Ability to review MTR’s & Cert’s against specifications,

●Interpreting NDE reports, current drawings, purchase orders, etc.

●**NOTE** Very familiar with Documentation and traceability.

PMI (Production Management Industries) From: July 2003 - Oct. 2006

(Environments Specialists)

9761 U.S. 90 Business Morgan City, LA 70380

985-***-**** (Jerry Crowe)

Tank and Vessel Inspection and fluid extraction

●Prepare chemicals and storage tanks for extraction of hazardous material from barges or production lines

●Onshore and offshore facilities decommissioning cleaning for removal.

●Onshore and offshore facilities decommissioning cleaning and pickling for future utility.

●Offshore pipeline decommission flushing and pickling for future utility.

●Land remediation, cleaning land fields that may have NORM present “Natural Occurring Radioactive Material”.

Greene’s Energy Services From: June 2000 - July 2003

(Pressure Testing Operator)

305 Pinehurst St, Lafayette, LA 70508

337-***-**** (Ronald Turner)

Production services

●Hydro Testing & Torqueing of production trees, lubricators, and flow back manifolds, pipe lines.

P & A support services

●Plug and abandonment well testing such as valves and flow lines.

●Pipeline cleaning operating flow support equip, pumps, pipeline pigs, air compressors, flanges ect.

Pipeline services

●Flushing and cleaning pipelines, pipeline pressure testing

●Pipeline flooding, cleaning and drying for future utility.

Education

University of Louisiana, Lafayette yr. 2009

Microsoft word & Excel 2003

Certificate of continuing Education

Lafayette, La.

●Microsoft word 2003 fundamentals.

●Microsoft Excel fundamentals and keystrokes

Louisiana Technical College yr. 2005

Basic Drafting

Certificate

Lafayette, La

●Auto CAD

●Drafting board drawings, 3D and 2D.

●Blue print drawing.

Southern University yr. 1993

Business Administration

Baton Rouge, La

●Business administration

●Business management

Morgan City High yr.1989 - 1993

General education

Morgan City, La

●General College prep classes

●ROTC

●GPA 2.75

Contact this candidate