Mr. MANOJ KUMAR

Contact No. : +917*********/+919*********

E-mail : ac2dgf@r.postjobfree.com

OBJECTIVE :

To secure a challenging position within a goal oriented organization that provides an opportunity to utilize my previous experience and provides sufficient challenges and satisfies my desire for continuous professional improvement.

CAREER SUMMARY:

Strong background in electrical and instrumentation control system, combined with more than 11 yearsof experience in field of automation, control systems, instrumentation maintenance. . Currently working as SR. Instrument Technician in V Tech Offshore PVT Ltd. Mumbai India at BHS Production Platform Mumbai High Offshore.

Extensive experience in routine, preventive, breakdown and shutdown maintenance work on a range of electronic and pneumatic field instruments in Power Generation, Desalination, Oil and gas, Petrochemical, Refinery and offshore crude oil processing facilities. Major equipment to be maintained are Instruments on LP-HP Gas Compressors, Oil and Gas fired Heaters, Instrument for High and Low pressure separators, Boilers, Gas and Steam Turbines, Instrument Air System, Fire and Gas detection system, Wellhead control system Instrument Workshop activities of repairing and testing Control Valves, SDV, SOV, ON/ Off, PSVs Valves, and all field Instruments etc. Background in Construction, PreCommissioning, Commissioning, Maintenance and Shut-down jobs. Knowledge and experienced on PLC,DCS,SCADA, ESD and F&G system. PROFESSIONAL WORK EXPERIENCE

(INSTRUMENT MAINTENANCE):

Responsible for Instrumentation daily activities that include Preventive, Corrective & Breakdown Maintenance, troubleshooting and repairing, equipment checklist & inspection verification.

Receive instructions from Supervisor /Engineer about the job including details about the instruments, withsketches, wiring etc. Select, prepare and assemble tools, measuring equipment and materials for specific job.

Be able to carry out work under minimum supervisor per work permit procedure as in an industry.

Select and inform Supervisor requirement of spare parts, materials and correct tools and equipment needed for the job.

Able search required information from Vendor documents and prepare required work permits.

Carry out preventive and routine maintenance schedule on all units as directed and in accordance with maintenance procedures. Prepare Work Report for job performed.

Carry out other similar or related duties, such as observing Company fire and safety regulations, maintaining the work site in a clean and tidy condition and recording details of the repair or maintenance carried out in the maintenance log.

Checking, calibrating, repairing, installation of different kinds of pneumatics and electronics instrument applied in plant such as orifices, smart transmitters, flow meters, switches, converters, controllers, control valves, Shut off Valve, Gauges and Solenoid valves and Control Damper.

Assigned in calibrating and maintenance of analytical instruments such as gas detectors, oxygen analyzer, carbon monoxide analyzer, ph meter, conductivity meter, and vibration monitoring switch as well.

Hands on experience Instruments supplied by : Foxboro, Kents, Mansoneilan, Enkard, Bently Nevada, Nagano Keiki, Fisher and Porter, Honeywell,Yokogawa, Rosemount, ABB, Endress-Hauser .

Assigned in removal, reinstallation and testing of all Bently-Nevada VMS in HP/LP gas/steam turbines, compressors, motors, blowers and pumps.

Assigned in Removal, Testing,Calibration and installation and of temperature and vibration probes for GE, Rolls- Royce, MHI and Alstom Gas and Steam turbines during overhauling and repair.

Prepares maintenance and inspection report for instruments and equipment found non-conforming.

Responsible in maintenance of the utility Boilers (T&I ) including its Fuel System, Water Treatment Plant, the Process Water System, Portable Water Unit, Steam Generation and Distribution System, Condensate System and the Plant Instrument’s air Control System.

Responsible in testing calibration and configuration of magnetic, vortex & mass flow meters.

Performs calibration, testing and installation of pneumatic and electronics Instrumentation which includes installation of tubing.

Service, repair, test and calibrate different kind of control valves and its accessories, this includes changing valves action and packing, seat and plug replacements

Repair,overhauling and fabricate some of non-critical electrical / instrument mechanical part as needed.

Hands-on by using some of fabrication tools including welding, gas cutting, grinder, drill machine, pipe threader,gasket maker,etc.

Performed bending of different size of impulse line tubing which is in standard slope and knowledge all compression fittings.

Can read well and understand Piping and Instrument Diagram (P&ID), and loop drawing .

(CONSTRUCTION & COMMISSIONING):

Inspection, testing, and calibrating of all instrument before installation.

Installation and mounting of all electrical and pneumatics instrument as per drawing and accordance to client standard/ NEC/IEC Standard and Intrinsically Safe Standard.

Good Knowledge and Experienced in tube bending and installation of all instrument impulse line such as: copper tubing, Stainless Steel tubing, flexible tubing with standard slope.

Good Knowledge and Experienced in all compression fittings, cable glanding, rack and panel mounting.

Assigned in all termination/connection from field to control room including Cross Board, Emergency Shutdown cabinet, Marshalling cabinet and DCS which include continuity testing and loop checking .

Involved in mounting of all vibration switches for all Steam and Gas Turbine, Motor Blower, Air Compressor which include laying of extension lead and proximator.

Good Knowledge and Experienced in fabrication and installation of all required support, hanger, based mounting.

Involved in loop cheking, Pre Commissioning and commissioning until start-up of the project.

Experienced in Troubleshooting for all Fields Instruments during Loop Check,and Commissioning.

. WORK HIERACHY:

Designation: SENIOR INSTRUMENT TECHNICIAN

Company/ Client: V Tech Offshore PVT Ltd India /Greenray Turbines Ltd / ONGC

Project/ Location: BHS Offshore Process Platform Mumbai High, Offshore India

Period of employment: 20/05/2017 to Present

Designation: INSTRUMENT & CONTROL TECHNICIAN

Company / Client: Babcock Borsig Sevice Arabia Ltd /Saudi Electricity Company

Project/ Location QURRAYAH COMBINE CYCLE POWER PLANT # 2 – KSA

Period of employment: 17/12/2015 To 19/04/2017

Designation: SENIOR INSTRUMENT TECHNICIAN

Company / Client: The Oman Construction Company (TOCO) / Oman LNG

Project/ Location: OLNG Train – 2 Turnaround, Oman

Period of employment: Oct-2015 to Nov-2015 (Shutdown)

Designation: INSTRUMENT TECHNICIAN

Company /Client: KENTECH QATAR / Air Liquide Middle East / Dolphin Energy

Project/ Location: QSTec H2 Plant / Dolphin Energy Ras laffan, Doha Qatar

Period of employment: 17/01/2013 TO 20/02/2014

Designation: SENIOR INSTRUMENT TECHNICIAN

Company / Client: The Oman Construction Company (TOCO) / Oman LNG

Project/ Location: OLNG Train – 1 Turnaround, Oman

Period of employment: Sep-2012 to Oct-2012 (Shutdown)

Designation: INSTRUMENT FOREMAN

Company /Client: CCIC / ADCO/ NPCC

Project/ Location: Phase 1Thamama G & Habshan– 2,Abu Dhabi

Period of employment: 25/09/2011 to 25/07/2012

Designation: INSTRUMENT TECHNICIAN

Company /Client: Qatar Kentz W.L.L / JGC / KBR

Project/ Location: Shell Pearl GTL Ras laffan, Doha Qatar

Period of employment: 25/05/2008 TO 30/05/2010

Designation: INSTRUMENT TECHNICIAN

Company /Client: CCIC / GASCO/ BECHTLE

Project/ Location: ASAB Gas Separation Project, AGD 2, Abu Dhabi

Period of employment: 13/03/2007 to 19/04/2008

Designation: ELECTRICAL AND INSTRUMENT SUPERVISOR

Company /Client: V Tech Offshore PVT Ltd India /Greenray Turbines Ltd / ONGC

Project/ Location: Win Process Platform Mumbai High, Offshore India

Period of employment: 01/04/2014 to 01/09/2015

Designation: INSTRUMENT TECHNICIAN

Company / Client: Dolphin Offshore Enterprises Pvt. Ltd / ONGC

Project/Location : BHS & ICP Process Platform Mumbai High, Offshore India

Period of employment : 04/04/2003 to 12/06/2006

HSE courses & awareness:

H2S & BA Awareness Course

Offshore Survival Trainings

Firefighting Course

Educational Background:

Diploma in Instrumentation from M P Polytechnic, India in 2003. Personal Information:

Date of Birth : 10/08/1983

Gender : Male

Religion : Hindu

Nationality : Indian

Marital Status : Married

Languages known : English,Hindi

Passport details : K-3461671, Valid till 07-10-2022

ECNR : OK

Contact this candidate