Ritchie A. Holmes

**** ********** **.

Pittsburgh, Pa. 15201

412-***-**** cell

ac2cvh@r.postjobfree.com

EDUCATION: McKeesport Area Senior High School

Drexel University, Philadelphia,Pa

U.S. Postal Engineering School, Merrifield,Va

CAD Research, Pittsburgh,Pa

CLEARANCE: Level Secret

EXPERIENCE:

5/2017 to 8/2017

Lowes Inc. Hornell,NY

Electrical Sales Associate; This job envolved assisting the sales group to sell electrical parts and products to the customers; most home as well as industrial commerical consumers. I helped the customers to select the correct parts they needed as well as assisted proper installation. I explained to the customers standards such as the (NEC) Nationnal Electrical Codes as it applied to what there project was. I also explained how to properly wire what they wanted. This envolved customer service; face to face, telephone or the internet.

7/2014 to 5/2015

System One Inc., Pittsburgh, Pa.

Electrical/Mechanical Designer – Work done for Alstom Technologies, Hornell, Ny. E/M design and re-design of transportation systems, Light Rail Vehicles (LRV). Work consist of upgrading and adding various electrical and electronic sub-systems on new and used intercity rail cars and the track systems they run on. Work done using Autocad R2013 and wire and cable listing programs using a P.C. based network.

1/2013 to 10/2013

Carnegie Strategic Design Engineers, Pittsburgh, Pa.

Electrical/Mechanical Designer - Work done for CSD Engineering Division, Pittsburgh,Pa.

E/M design and drafting of electrical equipment and facility installations for various types of material manufacturing and handling systems; automated coating and plating systems and material extraction.

Equipment design for the shale oil fracking operations of the Marcellus Shale Oil Coalition. Work done using Autocad version R2012 3D. Software on a P.C. based network.

1/2012 to 11/2012

ALTERNATIVE STAFFING INC., Bridgeville, Pa.

Electrical/Mechanical Designer - Subcontracting work done for CV Engineering, Pittsburgh,Pa.

E/M design and drafting of electrical equipment and facility installations for various types of steel manufacturing; arc and hearth furnaces, high temperature material handling and chemical cleaning. Control panels, embedded and exposed conduit installation. Work done using Autocad version R2009 3D, Autocad Inventor 3D and Autocad Revit 2013. Software on a P.C. based network.

11/2008 to 8/2009

K.A.HAMILTON INC., Pittsburgh, Pa.

Electrical/Mechanical Designer - Subcontracting work done for CV Engineering, Pittsburgh,Pa.

E/M design and drafting of electrical equipment and facility installations for various types of steel manufacturing; arc and hearth furnaces, high temperature material handling and chemical cleaning. Control panels, embedded and exposed conduit installation. Work done using Autocad version R2009. Software on a P.C. based network

.

7/2007 to 11/2008

Electrical/Mechanical Designer - Subcontracting work done for Core Furnace Inc., Coraopolis,Pa.

E/M design and drafting of electrical equipment for various types of steel manufacturing; arc and hearth furnaces, high temperature material handling, smelting and forging. Control panels including PLC's through wiring on the furnaces. Work done using various Autocad versions; R2008, Inventor and Mechanical. Software on a P.C. network.

6/2001 to 1/2004

TECHNICAL SOLUTIONS, Murrysville, Pa.

Electrical/Mechanical Designer - Subcontracting work done for A.E.A. Technologies Inc., Pleasant Hills, Pa. E/M design and drafting of power distribution of light rail transportation systems, primarily E/M packaging. This work is a customer support project. The primary work is for the in-house products of which is nuclear waste handling equipment. The work is primarily mechanical. Work is done using Pro/Engineer Version 20.0 and Autocad R14. with Windows. Software on a P.C. network.

12/2000 to 1/2001

Electrical/ Mechanical Designer - Subcontracting work done for Tollgrade Communications Inc., Cheswick, Pa. E/M design and drafting of communication test equipment for cable television distribution and telephone signal distribution. Work involves design of rack panel mounted electronic equipment for sale to cable television companies. The work is done using Autocad 2000 and Autocad R14.0 with Windows. Software on a P.C. network.

7/99 to 10/99

Electrical/Mechanical Designer - Subcontracting work done for A.E.A. Technologies Inc., Pleasant Hills, Pa.

5/99 to 7/99

Electrical/Mechanical Designer - Subcontracting work done for Robicon Corporation, Monroeville, Pa. E/M design of high voltage drive systems for various power distribution applications. Work consists of rack and panel design. Design is done using Autocad R14.0 with Mechanical Desktop Version 3.0.

10/98 to 5/99

TECH AID CORPORATION, Pittsburgh, Pa.

Electrical/Mechanical Designer - Subcontracting work done for Fore Systems, Inc., Warrendale, Pa. E/M design and drafting of computer networking hard ware. High-speed digital switching equipment used for installation of networks in customer’s work sites. Work consisting of rack and panel design, cable layout, etc. Design is done using Autocad R14.0 with Windows. Software on a P.C. network.

4/97 to 5/98

TECHNICAL SOLUTIONS, Murrysville, Pa.

Electrical/Mechanical Designer - Subcontracting work done for Solid State Measurements Corp., RIDC Park-West, Pittsburgh, Pa. E/M design and drafting on high precision measuring equipment used for design and manufacture of integrated circuitry. Work includes layout of mechanical fixtures, P.C. boards and cabling. Design is done using Autocad R13.0 with Windows on a P.C. network.

3/97 to 4/97

Electrical/Mechanical Designer - Subcontracting work done for Lifecor Inc., RIDC Park-East, Pittsburgh, Pa. E/M design of production, test and support equipment for cardiac monitors and defibulators. Work consists of mechanical and electrical layout of plastic molds, printed circuit boards and cabling. Design is done using Autocad R13.0 with Windows on a P.C. network.

12/96 to 3/97

Electrical/Mechanicl Designer - Subcontracting work done for PPG/Fiberglass Center, RIDC Park-East, Pittsburgh, Pa. E/M design of test and production equipment for support of production centers. Work consists of mechanical and electrical layout of various fixtures and equipment. Design is done using Autocad version R13.0 with Windows on a P.C. network.

2/96 to 11/96

Electrical/Mechanical Designer - Subcontracting work done for Automated Healthcare Inc., RIDC Park-East, Pittsburgh, Pa. E/M design of phamaceuticals. Work consisting of mechanical layout of robot structure and electrical and electronic interface to systems. Control panel design and layout is included. Design is done using Autocad version R13.0 with Windows on a P.C. network including a parts management system.

7/95 to 1/96

Electrical/Mechanical Designer - Subcontracting work done for Aerotech Corporation, RIDC Park-East,Pittsburgh, Pa. E/M design of linear and rotary motion equipment,”X-Y” tables, precision optical equipment and automated assembly line equipment. Work involves standard product line upgrades, custom design equipment and remake of obsolete equipment purchased by clients. All work is done in accordance with ISO-9000, commercial standards and customer’s standards if required. Design is done using Autocad version R13.0 with Windows on a P.C. network including a parts management system.

5/95 to 7/95

Electrical/Mechanical Designer - Subcontracting work done for Redzone Robotics Inc., Pittsburgh, Pa. E/M Design of custom robots and related control equipment; remote and tethered. Robots primarily used for work in hazardous areas or areas with limited or lack of access. Most work at the time was contracted from the U.S.Environmental Protection Agency. Work involved control panel design, support equipment, interchangeable tooling on the robots, manuals, etc. Work is done using Autocad version R12.0 with Windows.

8/94 to 6/95

Electrical/Mechanical Designer - Subcontracting work done for Shandon-Lipshaw, RIDC Park-West, Pittsburgh, Pa. E/M packaging and mechanical design on various equipment used in the medical and pathological fields, including printed circuit boards, cabling, schematics, machining and sheet metal work. Work is customized in accordance with the client’s requirements, commercial standards and ISO-9000 quality requirements. Assembly and test fixture design is done for in-house use. Work is done using Autocad version R12.0 with Windows on a P.C. network including a parts management system.

10/92 to 7/94

Electrical/Mechanical Designer - Subcontracting work done for Extrel Corporation, RIDC Park-East, Pittsburgh, Pa. E/M packaging and mechanical design of mass spectrometer systems including printed circuit boards, vacuum chamber design, cabling and pneumatics. Work is on a new product line from breadboard prototype to production line model, assembly fixtures and test equipment. All work done with commercial standards to receive licensed approval from U/L, C.S.A. and F/M. Design work is done using Autocad version R12.0 on a P.C. network including a parts management system.

9/90 to 9/92

CUSTOM INDUSTRIAL CONTROLS, Glenshaw, Pa.

Electrical/Mechanical Design Engineer - Design engineering of custom control panels primarily electrical and some pneumatic and some hydraulic. Engineering involves design of metal work for custom enclosures, component mounting and installation, wiring and wire harness design. Quality in accordance with customer and industry specifications. Design using Autocad version R10.0 and parts and procurement control using an IBM P.C. network system.

References Furnished Upon Request

Ritchie A. Holmes

5011 Somerville St.

Pittsburgh,Pa 15201

412-***-**** cell

ac2cvh@r.postjobfree.com

Dear Sir:

I am interested in employment opportunities with your company and can be reached at

412-***-**** or at the address above. Thank You in advance for your consideration.

Sincerely,

Ritchie A. Holmes

Contact this candidate