JASON L. LAPINSKI ac2ct3@r.postjobfree.com

***** ******* ******** ***., ******** 48125 313-***-****

OBJECTIVE

To obtain a position utilizing 18 plus years of technical design and CAD experience in a progressive, positive environment. Manual Drawing, CATIA V5 5000 hrs +.

SUMMARY OF QUALIFICATIONS

Technical Drafting and Technical Writing in Aerospace, Engineering and Architecture

Able to read and use blue prints and manufacturing specifications

Experienced with the Air Transport codes (ATA-100) in locating the area of Structural Repair on the aircraft.

Experienced with Microsoft Windows, Microsoft Word, Microsoft Excel, and Microsoft Power point.

PRESTIGE GROUP, Clinton Twp., Michigan

CATIA V5 NC Programmer – April 2016 to May 2017

-Worked offsite at FCA US LLC in Auburn Hills on various projects for NC programming.

-Programmed for 3 and 5 axis machines using Advanced Machining Workbench.

-Utilized VeriCut software to check for violations, and cutter path flow to maximize milling capabilities with proper speeds and feed rate.

-Worked with mill operators on job set up, programming, and to resolve any milling issues that may have arisen.

-Programmed for various densities of foam and clay.

-Programmed for parts, molds for parts, and parts that needed to be milled on a fixture in order to mill the other side.

DUNCAN AVIATION, Battle Creek, Michigan

CATIA V5 Designer – March 2010 to January 2016

-Responsible for reviewing customer data for any missing data, check for form, fit, and function on interior monuments of the 7X business jet.

-Worked on private high end business jets. Designed and or modified cabins to interior layout of the aircraft per the customer’s request. All modifications and changes must meet FAA compliance, stress analysis, and flammability testing.

TECHNIGRAPHICS, Southfield, Michigan

CATIA V5 Designer – October 2007 to March 2010

Worked on the following projects:

PLM Data Conversion on the Boeing Chinook C-47 Helicopter

-Responsible for converting CATIA V4 data, and Mylar drawings to CATIA V5 CAD Data.

-Responsible for checking CAD files for data integrity and proper format structure as per the

-Boeing drafting standards.

CATIA V5 Manufacturing - NC Programming

-Worked on various projects for NC programming supervised by Clyde Hatfield.

-Programmed for 3 & 5 axis machines using Advanced Machining Workbench.

-Utilized VeriCut software to check for violations and to maximize milling with proper set ups.

CATIA V5 Designer for Duncan Aviation off-site in Lincoln, Nebraska

-Responsible for reviewing customer data for any missing data, check for form, fit, and function on interior monuments of the 7X business jet.

-Worked with Duncan’s engineers to make design changes on the jet’s Interior monuments.

-Compiled CAD guidelines and relayed the information to the Design Group.

QUALITY METALCRAFT Inc, Livonia, Michigan

General Helper – August 2004 to September 2007

Worked on small assemblies, and packing parts. Lo Hi-Low driver, and loaded and unloaded trucks. Also shipping and receiving. I have been awarded for my contributions to the suggestion program with time saving jigs and fixtures to aid in the packaging process, and part assembly process. (Note: The top award I received for my Ideas and designs was $1500.00)

JASON L. LAPINSKI Page 2

ROUSH INDUSTRIES, Allen Park, Michigan

A Tier 1 Supplier that took over Carron Ind. Contracts

CAD Senior Designer - May 2002 to March, 2003

CARRON INDUSTRIES LLC, Inkster, Michigan

A Tier 1 Supplier for Ford Motor Company

CAD Senior Designer, and Data Integrity Manager - June 1999 to May, 2002

ISO-9000: 2000 Internal Auditor – January 2001 to May, 2002

Worked on the following projects:

Ford H215 Program, the Ford Medium Duty F650 and F750 Truck Line

-Designed and detailed a verity of chassis parts on the H215 Blue Bird Bus Chassis Program.

-Responsible for checking parts for design, fit, and function

-Developed and implemented data integrity for the H215 program

-Responsible for checking CAD files for organization and structure as per Ford Motor Drafting Standards

-Compiled CAD guidelines and relayed the information to the Design Group.

Ford U 207 & P 207 Program, The Ford 2001 Explorer Sport and the Ford Explorer Sport Trac

-Supervised employees on releasing details and layouts for the 2001 Ford Explorer Chassis package.

-Responsible for minor design changes and detailed a verity of chassis parts on the P 207 Explorer Program

-Responsible for assessing, tracking and assigning jobs to the group.

-Performed a preliminary check on the drawings for data integrity and proper format structure.

-Contacted engineers and suppliers on getting drawings out in a timely matter.

BUTLER SERVICE GROUP, Redmond, Washington

A Contract Service Group for Boeing Commercial Airplane Group

Technical Designer and Technical Writer – January 1997 to December 1998

Worked on the following projects:

Technical Writer of Repair Documents

-Supervised employees on writing and publishing technical repair documents for the 747, 767, and 777 Airplane Models.

-Responsible for writing and publishing technical repair documents for the Airline Customer.

-Trained rotation Engineers in the technical repair process and how to write a technical repair letter.

-Developed and wrote technical repair guidelines that are now being used by the company on a web site.

-Used the Air Transport codes (ATA-100) in locating the area of Structural Repair on the aircraft.

Engineering Liaison Group

-Worked with the Engineers and the shop to correct drawings and parts list.

-Made structural and mechanical drawing changes manually and electronically on CATIA.

CARRON & COMPANY TOTAL PROTOTYPE TECHNOLOGY, Inkster, Michigan

A Tier 1 Supplier for Ford Motor Company

CAD Designer – June 1995 to January 1997

Worked on the following projects:

Ford PHN 131 CP Hybrid Program, The Ford 1999 Super Duty F-Series Pick up Truck

-Designed and detailed parts and patch panels on the PHN 131 program from a SP level to a CP level, such as the frame and cross-members, the exhaust system routing, heat shields, motor and transmission mounts.

-Involved in working with the shop personnel in overseeing the installation of the parts.

A.O. Smith, A frame supplier for Ford Motor Company

-Supervised employees on detailing and design changes for the 1998 Ford Ranger frame package.

-Responsible for transferring CAD data to and from the customer.

-Performed a preliminary check on the drawings, and returned them to the design detailer for checker changes.

- Assured proper data integrity in the CAD files before they were released to the customer.

JASON L. LAPINSKI Page 3

LIVERNOIS ENGINEERING COMPANY, Dearborn, Michigan

A Tier 1 Supplier for the Big 3 Automotive Companies

CAD Designer – May 1993 to June 1995

Worked on the following projects:

Ford Heavy Truck Division HN80 on PDGS

-Detailed parts for Ford Heavy Truck Division, attended Ford checker meetings to be informed of the latest and revised Ford drawing procedures. This Information was then relay to the design group

Chrysler Electric Van Battery Cases

-Designed and detailed battery cases for Chrysler’s electric minivan project, also was exposed to the aspects of packaging.

FREELANCE (Jason Lapinski freelance woodworker)

Woodworker, Carpenter, and Cabinetmaker - 1992 to Present

-Drew up plans with proposals and presented them to clients.

-Designed, bid, constructed and installed various woodworking and carpentry projects for both commercial and residential.

D.F.P., INC., Detroit, Michigan

Working Foreman - 1991 to 1992

-Was a working foreman that oversaw the employees, and assigned work schedules.

-Designed, and drew up plans for various cabinet projects.

-Broke down blue prints to a cut list for production, and yielded the most from material with minimum waste.

CONCEPTS IN LAMINATE, INC., Dearborn Heights, Michigan

Working Foreman of Cabinet Production - 1990 to 1991

-Was a working foreman in charge of the cabinet department that oversaw work from start to finish, along with staff supervision and quality control.

-Designed, and drew up plans for various cabinet projects.

-Broke down blue prints to a cut list for production, and yielded the most from material with minimum waste.

FREELANCE

Woodworker, Carpenter, and Set Builder - 1987 to 1990

-Drew up plans with proposals and presented them to clients.

-Designed, bid, constructed and installed various woodworking and carpentry projects for both commercial and residential.

-Built commercial backdrop sets for the automotive industry for photo shoots for the new car catalogs.

METROPOLITAN FRANCHISE CORPORATION, Southfield, Michigan

General Contractor and Maintenance Person - 1985 to 1987

-Designed and drew up plans with proposals for building reconstruction with a cut list and a list of materials used to remodel 13 Bonanza restaurants.

Responsible for general repair, and maintenance including electrical, plumbing, cabinets, drop ceilings, and

carpentry.

DeGUILIO INDUSTRIES, INC., Dearborn, Michigan

Cabinetmaker and Machinist - 1981 to 1985

-Responsible for setting up and maintaining various woodworking machines.

-Supervised and trained shop staff in the cabinet department.

JASON L. LAPINSKI Page 4

EDUCATION AND TRAINING

Kellogg Community College, Battle Creek, Michigan

Certificate of Completion, Communication Skills Training .25 Credits December 3, 2015

3DVision Technologies, Wooster, Ohio

Certificate of Completion, SolidWorks 2010 Essentials Training January 29, 2010

PTC University, Southfield, Michigan

Certificate of Completion, Pro Engineering Wildfire 4.0 5-Day Course, September 18, 2009

Henry Ford Community College, Dearborn, Michigan

Certificate of Completion, CATIA V5, Three, 2 Credit Hour Class, Grade A March 01, 2007

EDS PLM Solutions, Henry Ford Community College, Dearborn, Michigan

Certificate of Completion, IDEAS/SDRC C3P 3D Drafting and Master Notation, November 2002

Certificate of Completion, IDEAS/SDRC C3P Basic Part Modeling, C3P 9, September 2002

PRESTIGE ENGINEERING TECHNICAL TRAINING GROUP, Inkster, Michigan

Certificate of Completion, Unigraphics Version 17 Training, October 2001

(Basic User I, Assembly, Drafting & Modeling)

ISO 9000: 2000 TRAINING FOR PERFORMING INTERNAL AUDITS, Inkster, Michigan

Certificate of Completion, Version ISO/FDIS 9000: 2000, December 2000

GEOMETRIC DIMENSIONING AND TOLERANCING, Inkster, Michigan

Certificate of Completion, Level ASME Y14.5M-1994, July 2000

ROBERT McNEEL AND ASSOCIATES, Seattle, Washington

Certificate of Achievement - Level I AutoCAD R14 Training, January 1999

THE SEVEN HABITS OF HIGHLY EFFECTIVE PEOPLE, Everett, Washington

Certificate of Completion, April 1997

CENTER FOR PROFESSIONAL STUDIES, Troy, Michigan

Certificate of Completion - Basic CATIA Design, October 1996

HENRY FORD COMMUNITY COLLEGE, Dearborn, Michigan

Associate of Science Degree in Architecture, May 1993

(Courses in Industrial and Architectural Drafting)

LIVERNOIS ENGINEERING COMPANY, Dearborn, Michigan

Certificate of Achievement - Team Training Level I, 1994

Certificate of Completion - Geometric Dimensioning and Tolerance, 1994

Certificate of Completion - TQI Training, 1994

Certificate of Completion - PDGS Surface Construction Design Course, 1993 by Computervision

Certificate of Completion - Basic PDGS Design, April 1993

DALE CARNEGIE COURSE, Southfield, Michigan

Certificate of Completion, May 1992

STATE OF MICHIGAN DEPARTMENT OF CONSUMER & INDUSTRY SERVICES, Lansing, Michigan

Residential Builder License for the State of Michigan - May 1987

(Residential builders and maintenance and alteration contractors' board)

EDSEL FORD HIGH SCHOOL, Dearborn, Michigan

Majored in Art and Woodworking / Graduated with Art and Woodworking Awards, June 1981

References upon Request

Contact this candidate