Resume

Sign in

Engineer Project

Location:
Abu Dhabi, United Arab Emirates
Posted:
November 12, 2017

Contact this candidate

OSAMA HASSAN MOHAMED

Carrier Summary

Responsibility: Project Manager for Telecommunication and SCADA for Installation and Commissioning for Project Power Plant and reporting to Power Plant Project Manager.

Senior Telecommunication SCADA Consultant Engineer with responsibilities for the conceptual, FEED and detailed design engineering of all telecom system, integration of the new digital system/network to the existing system

Telecom systems: SDH system, Fiber Optical Network, CCTV system, PABX Network, Public Address/General Alarm System, Radio system, SCADA System, DCS System.AC/DC Voltage .

Telecommunication & SCADA Expert with extensive experience in Consultancy, Planning, Design, Engineering and Project Management activities for industrial projects in Power Plant the functional areas include:

SCADA System:-

Familiar with Siemens and ABB RTU System.

Familiar with Siemens and ABB and Alstom SAS System.

Development of PLC and SCADA System.

Commissioning and Start-up for several projects using PLC and SCADA systems.

PLC maintenance, optimize, modify of PLC software, hardware and SCADA/HMI.

Support various protocol standards such as Modbus, IEC 60870, IEC101/104, DNP3 making it possible to interface with 3rd party software.

Using serial ports (RS232, RS482, and RS422) or Ethernet to communicate with the central stations.

Testing of power transformer on load tap changer.

Review and Testing of all signals going from field to SAS system

Testing of HVAC signal appearing in SAS system

Carry out HMI modification on SCADA packages.

Ethernet Network concept for Routers, Switches and Firewalls.

Ethernet Network concept according to IEC61850, IEC62439-3

PRP. Carry out point to point test.

Carry out system tests according to approved test forms and ITPs.

Testing of 13.8 KV switchgear (CT, VT, Vacuum circuit Breaker, isolator and earthling switch).

Testing of 132 KV GIS system (CT, VT, GIS breaker, isolator and earthling switch).

Scheme checking of 34.5kv switchgear including incomer feeder, outgoing feeder, capacitor bank feeder and Bus coupler.

Testing of OC/EF relay REF 620, BCU relay REFF620, Bus bar protection Relay REB611, MultiMate’s, MCCB, MCB, Auxiliary transformers, Power Transformers, NER, RMU and Power cables.

Telecommunication System:-

Telecommunication Switching & Transmission Systems, Digital PABX, Plant Communication Systems, Industrial Paging / Public Address Systems, Integration, Networking and Interplant Cabling.

PAGA Systems

PTS Systems (Personnel Tracking System)

TSAM Systems

Tetra Radio Systems

Industrial CCTV Systems for Monitoring, Process Control and General Surveillance.

VHF, Radio Communication Systems

OFC system and SDH/SONET technologies

PAGA System Installation & Cable Termination

PTS System Installation& Cable Termination

External Analog Telephone Unit Installation& Cable Termination

CCTV System Installation &Cable Termination

Flash Becon System Installation & Cable Termination

GPS Antenna Installation& Commissioning

SDH Installation& Commissioning

VHF Radio WorkStation Installation

UHF TETRA Radio Installation &Commissioning

LAN/IT Services and Data Network System

PABX Telephones and Hotline System

Video Conferencing System

Radio Paging System

Voice Recording System

Meteorological System

GPS Clock System

Telecommunication System Alarm Management

Electronic Security Control Systems comprising Access Control Systems, Intruder Detection, Fence and Perimeter Security, CCTV Surveillance Systems, Metal Detectors, etc.

Fire Detection & Alarm Systems - Automatic & Manual Break Glass type.

Supervisory Control & Data Acquisition Systems (SCADA) for Power Supply Distribution, Water Supply Distribution.

Ability to work under pressure and team work.

Ability to supervise and lead the group.

Ability to supervise & manage Quality Dep.

Ability to organize the training process.

Ability to lead sites Construction project

Ability to lead sites O&M project

Self-motivated and hard worker

Seek to work in different fields

Ability to work independently and team work

Easy and fast to learn

Ability to solve problems and troubleshoot in RF systems.

Ability to control and manage the ware house.

Ability to instruct the transmitter, receiver, antenna, radio frequencies and any communication systems.

Ability to work in GSM&CDMA network

Training at installation and management of ZTE CDMA network.

PHONE

+971565377956

+971566616156

EMAIL

ac29u7@r.postjobfree.com

ac29u7@r.postjobfree.com

SKYPE

Mohamed.yousef123

ADDRESS

UAE/Abu Dhabi

Permanent Address:

Egypt

Suez

Current Employment

ZADCO Project - EPC2, Island Surface Facilities Project

Petrofac Onshore Engineering & Construction (OEC)

Lead Telecom Construction & Commissioning Engineer-WEST Island:-

Supervise all activity with contractor for Installation and Commissioning it with Client .

Review drawing, contact with Vendor, review procedure, Loop checking Pre Commissioning, commissioning and test start up.

Commissioning Focal point with Client;

Commissioning Engineering Development and Coordination

Maintenance Subcontractor Coordination

Check all construction and follow up jobs till ITRs closed.

Check all Telecom equipment, LAN . Fiber Optic, Patch Panel, Distribution switches

Follow Telecom technician team and scheduling task for all project.

Meeting for Reporting progress with client and Management further change order with subcontractor and/or Vendor.

Familiar with the latest Federal Communication Commission rules and regulations related to telecommunications.

Skilled in using advanced telecommunication equipment

Skilled in preparing and maintaining communication records, and logs

Ability to develop integration between computers and telephones

Expert in analyzing and fixing technical problems in telephone systems

Knowledge of fiber, copper, and other materials used in communication systems

Proficient in CAD systems and MS Office suite

Troubleshooting skills

Good communication both Verbal and written.

Managing and guiding the Installation, pre commissioning and commissioning manpower / team.

Fiber Optic cables Pulling and Installing and Testing.

PAGA System Installation & Cable Termination

PTS System Installation& Cable Termination

External Analog Telephone Unit Installation& Cable Termination

CCTV System Installation &Cable Termination

Flash Becon System Installation & Cable Termination

GPS Antenna Installation& Commissioning

SDH Installation& Commissioning

VHF Radio WorkStation Installation

UHF TETRA Radio Installation &Commissioning

LAN/IT Services and Data Network System

PABX Telephones and Hotline System

Video Conferencing System

Radio Paging System

Voice Recording System

Meteorological System

GPS Clock System

Telecommunication System Alarm Management

Previous Employment

Saudi Electric Company, KSA

Western Region-JEDDAH - Palace Consultant Engineers

Mar 2013 – Jan 2017

Telecommunication Engineer/ Senior SCADA Testing& Commissioning Engineer

PCC Project- S/S JNE-ABN-ANH

SEC EHV Project Department - WOA

Saudi Electric Company, KSA

Central Region- Palace Consultant Engineers

EHV Substation Projects Closing Committee-SEC EHV Projects Department-WOA-Jeddah Jan/2016 up to Present.

Overview of the Project:

Wadi Al-Dawasir-9701-380/132/13.8 KV SUBSTATION

Project Key Responsibilities:

SAS System ALSTOM-DIS Agile (SUBSTATION AUTOMATION SYSTEM) Witnessing and supervise for the following Activities:-

Installing Configuration for Bay Controller Unit (BCU).

Installing System and Database Download.

Configuration of ICD files in SAS System.

Testing for Fiber Optic Cable for SAS Interfacing.

Installing Configuration for SAS System.

Supervise the Installation for communication Panels.

Installing Configuration for SAS gate ways.

Configuration for PDH & SDH equipment; SDH-STM 1; PDH; MUX; DVM; DDF

Local test with SEC Witnessing for:-

SDH

MUX (NSN)-

PSE

Media Converter

TEE Protection

Fiber Optic cables testing from field to SAS systems.

OPGW test by OTDR

PLC Communication network

End to end test for PSE (Protection Signal Equipment) with checking all alarms and inter trip signals.

Configuration of System 1& 2 for local annunciation for alarms and signals.

Configuration of gate ways 1&2 for SCADA interfaces alarms and signals.

Saudi Electric Company, KSA

Central Region Palace Consultant Engineers.

Overview of the Project:

New QASSIM-4-Hail-2 (9032/9031) 380/132/13.8 KV SUBSTATION.

Project Key Responsibilities:

SAS System SIEMENS-SICAM (SUBSTATION AUTOMATION SYSTEM) Witnessing and supervise for the following Activities:-

Installing Configuration for Bay Controller Unit (BCU).

Installing System and Database Download.

Configuration of ICD files in SAS System.

Testing for Fiber Optic Cable for SAS Interfacing.

Installing Configuration for SAS System.

Supervise the Installation for communication Panels.

Installing Configuration for SAS gate ways.

Configuration for PDH & SDH equipment; SDH-STM 1; PDH; MUX; DVM; DDF

Local test with SEC Witnessing for:-

SDH

MUX (NSN)-

PSE

Media Converter

TEE Protection

Fiber Optic cables testing from field to SAS systems.

OPGW test by OTDR

PLC Communication network

End to end test for PSE (Protection Signal Equipment) with checking all alarms and inter trip signals.

Configuration of System 1& 2 for local annunciation for alarms and signals.

Configuration of gate ways 1&2 for SCADA interfaces alarms and signals.

Close loop test checking all alarms and signals from S/S to LDC (Load dispatch center of Makah) with testing telecommunication systems Routes.

Interface Partners of the Project:

Saudi Electric Company (SEC), SSEM, ALSTOM

Saudi Electric Company, KSA

Western Palace Consultant Engineers

Jan 2012 – Feb 2013

Telecommunication Engineer

Senior SCADA Testing& Commissioning Engineer

Overview of the Project:

Makah Project for New Substation 110/13.8 KV.

S/S (BATHAA QURAISH) – Remote end is SOUTH AZIZIAH S/S 380/110/13.8 KV and SHOQIYAH S/S 110 KV.

Project Key Responsibilities:

SAS System ABB (SUBSTATION AUTOMATION SYSTEM) witnessing and supervise for the following activities:-

Testing of IP address from SAS to Relays.

Installing / Configuration for SAS System

Testing of Fiber optic cables between SAS SW and Relay’s

Supervising the Installation, commissioning and testing for the following:-

MDF Panel; SDH-STM 1-Hit 7070; PDH; MUX; DVM; DDF

Cables Pulling and connected AC/DC power.

PSE Tele protection System (Analog & Digital).

P2P Test between Substations and LDC

Configuration for PDH & SDH equipment

Fiber Optic cables testing from field to SAS systems.

OPGW test by OTDR.

PLC Communication network

End to end test for PSE (Protection Signal Equipment) with checking all alarms and inter trip signals.

Configuration of System 1& 2 for local annunciation for alarms and signals.

Configuration of gate ways 1&2 for SCADA interface alarms and signals.

Close loop test checking all alarms and signals from S/S to LDC (Load dispatch center of Makah) with testing telecommunication systems Routes.

Supervise with another Contractors Allogamy contractor in Transmissions line for testing of OPGW:-

Testing and Splicing of OPGW in Transmissions Line with another Contractor to Connect this Cables from Remote End to our Substation.

Testing R.L and attenuation for OPGW and connect it to FOMR Panel and to ODF Panel as Scope of work for SEC.

Testing the length of OPGW as Built in.

Also checking the length of OPGW

Check the connection from S/S to LDC

Interface Partners of the Project:

Saudi Electric Company (SEC), ABB

Saudi Electric Company, KSA

Western Region

Palace Consultant Engineers

Mar 2011 – Jan 2012

Telecommunication Engineer

Senior SCADA Testing& Commissioning Engineer

Overview of the Project:

Makah Project for New Substation 100/13.8 KV.

Substation (Shamiyah-1&2) -Makah LDC - Makah West – JARWAL - JABAL QUBAIS – AJYAD

Project Key Responsibilities:

Supervising the Installation, commissioning and testing for the following:-

Panel erection; Cables Pulling and connected AC/DC power for below:

oMDF; FOX515; NSD570 Tele protection System (Analog & Digital).

oSDH & PDH & MUX

48VDC System

SCADA System

RTU 560:- testing and commissioning for Alarms/ Commands/ Indications/ Status/ Measuring.

SMK Panels; FMK Panels; Interposing Relay Panel; Transducer Panel – erection, Cables Pulling and connected AC/DC power, Pre Checking, End to End Testing.

LAN/FOMR Panel: Erection, Fiber Connection from SDH

WAN PANEL: Erection, Installation and cables Pulling from DDF

Optical Fiber Cable (STM) to SDH Pre Checking, Local testing, End to End Testing

OLS DDF Cabinet:-ALCATEL TRU Erection, Installation and cables Pulling, Pre Checking, Local testing, End to End Testing

SCADA System: - 110/13.8 KV SCADA

1-FMK&SMK:-

oInstallation and Cable Pulling

oCable from Field to FMK Panels

oConnection between SMK and FMK

2-Interposing Relay Panel: - Erection*Cable from SMK to Interposing Relay Panel.

3-Transducer Panel: Erection*Cable from Field to Transducer Panel

4-RTU Panel:

oErection*Cable from SMK to RTU*Cable from Interposing Relay Panel to RTU*Cable from Transducer Panel to RTU

oAC/DC Supply Connection*GPS Antenna-*Connection to 110/13.8 KV SDH Equipment’s*Pre Checking-

oLocal Testing with Switch Gear*Close Loop Test.

oInternal Close loop test from RTU to SWGR, GIS for Status and alarms and Commands and Measurements

oAnd from another side to RTU.

Testing Fiber Cable from S/S Shamiya to LDC through Rout of S/S Makah

Interface Partners of the Project:

Saudi Electric Company (SEC), ABB

Saudi Electric Company, KSA

Central Region AL Jazirah Engineers for Consultant

Feb 2009 – Jan 2011

Communication Engineer - SCADA system

Overview of the Project:

New 380/132 KV Substation Works Associated with Integration of Power Plant No: 10, Riyadh. S/S 9023

Project Key Responsibilities:

To supervise the work at site with Contractor ‘Siemens’ in Communication Room; As built the Design and the Drawings Approval from SEC.

oSupervise Testing and Commissioning for:

Commissioning and programming of Voice Recorder.

Participating in Preparation of technical Specifications, tender documents, tender evaluation and Contract administration.

Communication System All Equipment from Nokia Siemens:-

48VDC System: - *Battery Charging*Capacity Testing*Battery Re-Charging*Function Testing

380KV SDH hit 7070 Equipment and (MUX FMX2S):-

oErection*Installation Cables Pulling *Pre- Checking*End to End testing

380KV PSE Equipment’s:-

oErection * Installation Cable Pulling

Cables from protection relays

AC/DC Connections-

PSE to MDF Connections)

Pre Checking*Local testing*End to End Testing

PABX:-

oErection*AC Supply*Tele phone System

Media Converter:-

oErection *Installation and cables pulling

Cable from protection relays

Cable from Media Converter to DDF

Pre Checking*End to End Testing

LN/FOMR Panel:

oErection*Fibber Connection from SDH

WAN PANEL:-JUNIPER NETWORKS

oErection*Installation and cables Pulling

Cable from DDF

Optical fibre Cable (STM) to SDH

Pre Checking*Local testing*End to End Testing

OLS DDF Cabinet:-ALCATEL TRU

oErection*Installation and cables Pulling*Pre Checking*Local testing*End to End Testing

SCADA System: - 380KV SCADA

FMK&SMK:-

oErection*Installation and Cable Pulling

Cable from Field to FMK Panels

Connection between SMK and FMK)

Interposing Relay Panel: -

oErection*Cable from SMK to Interposing Relay Panel.

Transducer Panel:

oErection*Cable from Field to Transducer Panel

RTU Panel:

oErection*Cable from SMK to RTU*Cable from Interposing Relay Panel to RTU*Cable from Transducer Panel to RTU

oAC/DC Supply Connection*GPS Antenna-*Connection to 380 KV SDH Equipment’s*Pre Checking-

oLocal Testing with Switch Gear*Close Loop Test.

DSM Panel:-380/132 KV

oErection*Installation and cables Pulling

Cable from Fault Recorder (Protection Panel)

Cable from RTU Panel

Pre Checking; Local testing; End to End Testing

Supervise with another Contractors AETCON and El Sheriff in Transmissions line FOR TESTING and Installation of OPGW

Testing and Splicing of OPGW in Transmissions Line with another Contractor to Connect this Cables from Remote End to our Substation.

Testing R.L and attenuation for OPGW and connect it to FOMR Panel and to ODF Panel as Scope of work for SEC.

Testing the length of OPGW as Built in.

Also checking the length of OPGW

Check the connection from S/S to Control Site

Witness for Installation of OPGW at site.

Also supervise the work in CRCC and ERCC through Remote End to our Substation.

Other Responsibility

Place of purchase order.

Base design submittal & approval.

Detailed design submittal & approval.

Interface Partners of the Project:

Saudi Electric Company (SEC), SIEMENS

VODAFONE & ETISALAT, Egypt

Eastern Region

Nov 2002 – Mar 2009

Project Manager (Etisalat)

Overview of the Project:

Project Site coordinator, Operation and Maintenance.

Project Key Responsibilities:

Coordinate with Co. top management to achieve Co. strategic goals

Try hard to enhance and improve area and consequently Co. performance.

Create a flexible work system to achieve Area plans

Held a periodical meetings with Area stuff to control area week points

Coordinate with customers Vodafone & Etisalat to achieve the SLA (Service Level Agreement) and KPI (Key Performance Indicator) for Networks.

Responsible of Two main projects (Vodafone – Etisalat) Eastern Area

Responsible of area Annual budget (expected area Revenue – cost – profit (gross margin per activity / account / project)

Resources management; Manage & supervise all Teams

Operation

Work under Supervision:

Activities

1-PM

2-CM

Sub-Projects

1-IUB expansion

2-IBBS expansion

3-MW link swapping

4-New Link Installation

5-TRX expansion

6- BTS cabinet installation / swapping

7-ISP-DSLAM O&M

8-Sites Quality improvement

9-RSL Adjustment

10-DDF arrangement

11-Strut fixation

12-Sites Tch availability improvement

13-A/C operation improvement

Quality (Assurance - Control)

Planning (plans – Target- Achieved)

Financial (Budgeting – projects P&L (Profit& Loss)- Cash Flow chart)

Technical Office (Reporting–invoices-customer requirement)

Warehouses

Fleet department.

For Vodafone Golden Sites we Installing and Commissioning the CCTV Systems as per below:-

Handling projects for CCTV & Security Systems

Installation of CCTV cameras (Box, Dome, PTZ etc).

Assembling of DVRs & installation of OS in DVRs .

Monitoring the Backups for CCTV, Access Control, BMS systems.

Programming and Commissioning and Installation of Access Control, CCTV, Fire Alarm

Designing of the entire system as per the tender specifications and client requirements.

Integration of Access control System with Fire Alarm, Fire Alarm with BMS & Access Control with CCTV System.

Interface Partners of the Project:

Vodafone & Etisalat, Huawei

Emac factory Paper, Egypt

Oct 2001 – Nov 2002

Maintenance & Instrument Engineer

Project Key Responsibilities:

1.Maintenance of Instrument and calibrate For Instrument

2.Measuring the Qualification of Production

3.DCS Network System

4.PLC System

5.Follow-up the Production in the control Room

6.Maintenance for Scanner ( Measuring the Qualification of Paper)

7.Programming and Commissioning and Installation of Access Control, CCTV, Fire Alarm.

8.Designing of the entire system as per the tender specifications and client requirements.

9.Integration of Access control System with Fire Alarm, Fire Alarm with BMS & Access Control with CCTV System.

10.Monitoring the Backups for CCTV, Access Control, BMS systems.

Computer literacy

Professional in using computer. Microsoft Windows 8/7/vista/XP and Microsoft office 2013.

AutoCAD 2000

Ms Project, Primavera

Education

B.Sc. of Communication & Electronics Engineering.

High Institute of Engineer- Obour

Interpersonal Skills

Like to travel and work oversees.

Self-motivated and hard worker.

Seek to work in different fields

Easy and fast to learn.

Ability to work independently and team work.

Personnel Profile

Date of Birth

July 23, 1975.

Nationality

Egyptian

Marital Status

Married With Two Child

Languages

English, Arabic

Driving License

Egypt and KSA

Substation Name

Date From

Date To

Telecoms Equipment (SDH-MUX-MC-DDF-MDF-FOMR (OPGW))

SCADA Equipment / SAS

CITY

Power Pant PP-10-

S/S 9023 –

380/132/13.8 KV

02/2009

01/2011

Siemens (NSN)

Siemens RTU

Riyadh

Shamia-1&2 –

Makah West –

JARWAL –

JABAL QUBAIS –

JYAD 110 KV

03/2011

01/2012

ABB (FOX515)

Siemens (NSN)

ABB + Siemens RTU

Makah

Batha Qurish 110 KV

01/2012

03/2013

ABB (FOX515)

ABB SAS

Makah

Qassim-2 &3

9032&9029

380/132/13.8 KV

04/2013

05/2014

Alstom +ABB

Alstom + ABB (SAS)

Qassim

9032

380/132/13.8 KV

05/2014

05/2015

Siemens(NSN)

Siemens SAS

Hail

S/S 9701-380/132/13.8

05/2015

01/2016

ALSTOM

Alstom SAS

Wadi El Dawasir

PCC Project (Projects Closing Committee )-

380/132/110/13.8 KV

01/2016

20/01/2017

ABB +Siemens +Alstom

RTU + SAS

Jeddah +All Western Region-KSA

MY Substations/Power Plants Projects in KSA Within 8 Years



Contact this candidate