Project Engineer

*

CURRICULUM VITAE

NAME: FERNANDEZ, JOEL VITALICIO

DATE OF BIRTH: NOVEMBER 13, 1962

TOWN STREET: 40 H POBLACION SAN PASCUAL

CITY/PROVINCE: BATANGAS

COUNTRY: PHILIPPINES

CODE: 4204

LANGUAGES: ENGLISH / PILIPINO

MOBILE: +63-927-****-***

EMAIL ADDRESS: ac27v1@r.postjobfree.com

Job Targets:

• LEAD DESIGN PIPING

• SENIOR PIPING LAYOUT ENGINEER

• SENIOR PIPING DESIGNER

• FIELD CONSTRUCTION PIPING ENGINEER

• FIELD CONSTRUCTION PIPING SUPERVISOR

Previous Company: AIBEL PTE LTD

Industry Exposure:

Ø Upstream Oil & Gas (Fixed and Floating Design and Construction), FPSO Design Ø Downstream Oil & Gas (Refineries, Petrochemical and Chemical Plant, Pharmaceutical Plant, Power Plant (Diesel Power Plant) Key Capabilities and Skills:

Ø FEED and Detail Engineering

Ø Engineering and Design of Piping System (Process and Utilities) Ø Construction and Pre-commissioning

EDUCATION: Bachelor Of Science in Mechanical Engineering SCHOOL: Pablo Borbon Memorial Institute Of Technology (NOW; Batangas State University) Registered BS Mechanical Engineer: Registration Number 0039274 Dated: 6 JUNE 1989 YEARS OF EXPIRIENCE SUMMARY:

I attained 25 years 1 month working in different types of work in OIL and GAS Industry, mostly I gained extensive experience in Piping design and engineering for almost 21 years. v 7 years and 6 months in my previous company AIBEL PTE LTD. design and engineering with 3 years of experience working in maintenance and modification work in AIBEL NORWAY. Offshore project with BW Offshore Project FPSO topside module detailed engineering scope. 4 years and 5 months’ offshore platform and onshore design and engineering and construction in KBR- HALLIBURTON ACG Full Field Development Project / Central Azeri Platform offshore project. 7- years’ design and engineering with Fluor Daniel Inc. Philippines. 1-year design and construction P.T. Nippon Steel Construction Indonesia. 1-year in Chiyoda Corporation Japan. v 6-years in field and construction of petrochemical plant, power plant, oil refinery. v Computer knowledge in PDMS Piping and Support and PDMS support draft, PDS, review reality, SPR, naviswork, MS excel, MS word, MS PowerPoint, micro station, AutoCAD. Work Experience:

From November 2008 To May 2016

Company: Aibel Pte. Ltd.

41 Science Park Road #03-06/09

The Gemini, Singapore, Science Park II 117610

ALL PROJECT THAT I WAS INVOLVED IN AIBEL Pte Ltd:

Project Jan 2015 To April 2016: Catcher Development Project Client: BW Offshore

Position: Lead Designer Piping

Duties;

v A FPSO topside module scope where I gained extensive experience in detailed engineering, where my responsibilities are to ensure that the design layout is complying with the P&ID and process 2

requirements. Ensure that the applicable company system is used, that the relevant QA procedures and standards are followed and that the piping and layout design within my area of responsibility conforms to contract specific requirements and any applicable client, company, national and international standards, design codes and legislation and raise deviations where necessary. My plan modeled all priority lines for early stress calculation for support location so structural and piping can parallel execute the design and also the procurement department can do their work. Every week I have to review all model in my area check all lines are modeled yellow off against the master P&ID for monitoring and check equipment’s against latest vendor drawing. As part of company objectives flexibility in work. I also do some pipe layout, support modeling and efficiently executing 3D PDMS and 2D support draft using PDMS. I also modeled dummy steel at conceptual stage, preliminary access ladder location and platform for structural final design calculation and materials. Review model in preparation for 30%, 60%, 90% client review, in preparation for the review. I review all valves access, maintenance and operation, I ensure that access and maintenance volumes are not clashing with the valve hand wheel for obstruction. Maintenance of all equipment with bundle pull out are free from any obstruction and have clear access to the laydown area, give more priority to scape route access volume and always coordinate with the material handling engineer. With these procedures we lessen the client comments and easily target the isometric issuance for the priority lines.

I also handle the additional scope from IHI, Lay-out of Hull Piping for support and stress final calculation.

v Ensure to complete all works within the estimated man-hour budget and in a timely manner to ensure that project objectives and deadlines are met, maintaining own work progress (budget and schedule) and identifying scope change where necessary. v Liaise with other design disciplines and suppliers on technical and other piping design matters on a regular basis and in a professional manner.

v Working accurately and always within the provisions and guidelines of the company Quality Assurance system or that relevant to the Project.

v Safety Assurance for personnel safety safe working practices for the project. Understand and follow OH&S procedure (Occupational Health and Safety)

v Participate in internal and external reviews.

Project Dec 2013 To Jan 2015: 109072 (IM.X.0201 TTS Dimensioning) 101071_SFC (Air Handling Units)

Client: Statoil

Position: Lead Designer Piping

Duties:

v Working in Norway you have to be familiar with NORSOK, this is a standard developed by the Norwegian. Z005 Norsok standard: 2D-CAD Drawing. L001 Norsok standard: Piping and Valves, L002 Norsok standard: Piping Design Lay-out and Stress Analysis. M001 Norsok standard: Material Selection. And also Statoil TR 2000: Piping and Valve material specification. Statoil Stidweb and SAP system this is where all activities will be input so that maintenance and operator of Statoil knows what is your activities and scheduled.

v Working at Aibel Hammerfest Norway / Singapore, I experience working as a Piping Engineer, I study the (109072 TTS Check valve dimensioning for fail) modification project of 3 compressor 12in discharge line by installing a double check valve and one block valve for each line and also study the demolition of 12in existing compressor discharge line modification, this demolition study shows how many cutting of pipe needed to bring the demolished pipe to the laydown area. This demolition needed MTO for weight input for costing. I prepared the study report for 30%, 60%, 90% client review. In preparation for the execution phase report. This study report need visual aid so I prepared the 3D PDMS modelling of pipe and support, checking of space requirements, checking clash with reference to scanned model and offshore survey report, Truview, point cloud and photos. I prepared the tie-in point for electronic scanning survey. I prepared the weight input for costing. Estimating weight according to study for the modification line as per activity. Prepared the DEES Schema this is the detail engineering estimation system where you will estimate man hour you will used in every activity code during execution. During the execution phase I prepared the pre-fab isometric extraction and checking. Prepared pipe stress isometric for stress analysis and support locations. 2D pipe support draft extraction, 2D pipe support drawing checking. Fabrication package, Demolition package, Installation package. As-built isometric for client documentation. 101071 STATFJORD SFC (Air Handling Unit) this is the study and execution for the increase of capacity of the HVAC unit, additional lines and valves and existing lines modification as per process requirements.

3

Project Nov 2012 To Nov 2013: 109045 (PAHH Opening 42-HV-1499), 109048 (IM.X.0168 Installation of wear plates), 109055 (DM.X.0004 study construction of jetty), 109082

(IM.X.0215 DP measurement in 22-VE-101 & 22-VE-102), 109083

(IM.X.0218 Pressure protection segment 25-HA-104), 109076

(DM.X.0008 Flare tip replacement)

Client: Statoil Hammerfest LNG Melkoya

Position: Lead Designer Piping

Duties:

v Working at Aibel Hammerfest Norway, 109045 a modification project for additional check valve and a block valve for inline test arrangement near control valve the challenge in this modification is the access is not feasible I have to modify the existing platform. 109055 are the study of additional fire hydrant in the jetty. 109082 is the modification of DP measurement of column 22-VE-101 and 22-VE- 102 by adding PI for stage of the column the challenge in this modification is the space and operation of double block and bleed valves. And the support of the db valves, you have to use existing frame and no to much weight. 109083 are a modification of line by adding multistage orifice plate for pressure protection and a new relief valve. 109076 is the study of a additional flare to be used while the existing flare is being repair because of broken flare tips. The challenge in this study is that we have work on the flare line, which is on operation, study proposes using special hot tapping, I prepared the technical requisition for the hot tap and the technical requisition for the flare tips. Discuss with Fumanite Hot Tapping personnel the hot tapping procedure and risk. v I have to determine the advantages and disadvantages and relative cost of alternative design concepts and establish preferred concepts. Demonstrating continual improvement in the execution of work.

Project Nov 2011 To Nov 2012: STATFJORD SFA 101164, STATFJORD SFA 101177, STATFJORD SFB 101161 Repair of Kill Mud line, Gas lift, Flowline. Client: Statoil

Position: Lead Designer Piping

Duties:

v Work at Aibel Singapore, 101164, 101177, 101161, modification of wellhead, re-routing of Kill Mud line to new branch line. Study the gas lift line, flowline prepared the study report, and execution phase, extraction and checking of pre fab isometric, prepared the isometric for stress analysis and support location, and closely monitoring all the isometric for progress report. Modelling PDMS support, and PDMS 2D support draft extraction. Checking of support, prepared pipe support demolition drawing and weight estimation for cost. For the support strict coordination with the structural engineer, pipe stress engineer for support requirements if its subjected for anchoring, holdown or guide support only. Piping and support MTO, inspection isometric, as-built isometric, maintenance isometric and support as-built.

Project March 2010 To Nov 2011: Njord-A Platform Verification & Modification Crossover Project Statoil Petroleum AS

Client: Statoil

Position: Lead Designer Piping

Duties:

v Work at Aibel Kristiansund, Njord-A V&M Project, working in the process area risers, Njord north west flank production well. This is the study of using the new well and close the old well using the same flowline to production manifold. This also need to study the methanol injection pump to pressure up the flow line well A-03, well A-04. Prepared request for the electronic survey scanning of wellhead because of flange face tilt. This mercad measurement or electronic survey is uploaded to the PDMS as reference point for tie-in. then start the PDMS pipe modeling with the help of cloudworkx for clashing, 2D isometric and supports, demolition isometric. Project Nov 2008 To March 2010: Njord V&M Project Greater Ekofisk Modifications projects-P02 Client: Conoco Phillips

Position: Lead Designer Piping

Duties:

v Work at Aibel Singapore, modification projects on existing platforms EKOX, EKOJ. This is the upgrading of all deluge system to titanium pipe using existing deluge line routing and support, some challenges for the new support location because the new line using shoe support and need to modified existing support. Pipe modeling 3d PDMS and 3d PDMS support, using cloudworks for clash check and request mercad measurement. Producing 2d isometric and support for stress calculation for blastload. Prepared the feed study for some additional deluge system, MTO for support and piping, spooling for fabrication, demolition isometric for existing deluge line. Tie-in list. 4

From May 2008 To Oct 2008

Company: Kellogg Brown & Root Asia Pacific Pte Ltd 79 Anson Road #20-01 Singapore 079906

Project May 2008 To Oct 2008: Saudi Kayan Petrochemical Complex, SK Olefins Plant-A Jubail Saudi Arabia

Client: SK Olefins Plant-A Jubail Saudi Arabia

Position: Senior Piping Designer

Duties:

v Working at Kellogg Brown & Root Singapore. Execute the detailed design of SK Olefins Plant-A, piping modeling conforms as per AFC P&ID. Execute quality design and economical routing for good design with due regards to minimization of cost whist maintaining technical integrity and consistency is maintained. Produce the piping isometric with good quality. Submitted the stress isometric for calculation, follow thru with other discipline. Always monitor latest equipment vendor drawing and check against PDMS piping model and equipment. Update master flow diagram and location control plan for any approved changes, issued AFC isometric.

From March 2004 To May 2008

Company: Kellogg Brown & Root Overseas Operation Ltd 5 Tbilisi Ave, Block 1003, Baku, Azerbaijan 370065 Project March 2004 To May 2008: ACG(Azeri-Chiraq-Gunashli) Full Field Development Project

• Sangachal Terminal Expansion (Phase I,II,III)

• Shah Deniz Gas Export Project

• Central Azeri PDQ Platform offshore project Azerbaijan Client: BP (British Petroleum) and SOCAR (State Oil Company of Azerbaijan) Position: Senior Piping Designer

Duties:

v Working at KBR Baku Azerbaijan. Familiarizations of client project (BP) engineering specification, and to ensure applicable company system are used. Follow the Design instruction an internal guideline for uniform design and correct practices. Familiar with the equipment location using equipment plot plan and incorporating minimum plant spacing requirements, follow P&ID process and instrument diagram to comply with the process requirements. Ensure supplier-required design for the valves and vendor equipment latest revision for correct nozzle projection and execute equipment modeling. Using line list for more pipe information. Efficiently executing manual layout, 2D CAD and 3D PDMS design activities, execute the detailed design, production and checking of engineering isometric, complete preliminary isometric for stress calculation for final layout and supports. Also involve in PDMS HVAC ducting layout of control rooms.

Every week, assign to site work and support the installation group of piping and support, monitor all installed pipe for progress support, produce system isometric for support for installation group. And understanding of piping construction techniques.

From Feb 2001 To Feb 2004

Company: Fluor Daniel Inc. Philippines

3rd Floor, Asian Star Building Fil Invest Corporate City, Alabang, Muntinglupa City Project Nov 2003 To Feb 2004: Upstream Project Tengizchevroil (TCO) Asset Development Project

(Sulphur Recovery Unit)

Client: Tengizchevroil (TCO)

Position: Principal Designer

Duties:

v Working at Fluor Daniel Manila Philippines. As a principal designer proven leadership skills and strong interpersonal skills I used to back up to project piping lead and supervisor. Ensure final design is fit for purposed and not over or under designed. To developed, contributed and support the total project team. I ensure every member of the team practiced the Fluor Daniel standard. I ensure an effective quality program is in placed understand and being followed by the task force. Progress 5

schedule by tracking ISO progress through multiple gates takes directions from the lead piping engineer and communicate to piping designer. I ensure that the design consistency is maintained, I am a self-starter, problem solver and can independently generate initiative practical solution to piping layout problems and executes quality control procedures. Under general direction of the piping design I supervise, interpret contract requirements to produce optimum plant design and develop area layouts and piping designs from conceptual studies through to issuance of isometrics and drawings. Check as required.

Project Oct 2002 To April 2003: United Olefins Complex Client: Jubail United Petrochemical Company, Jubail, Saudi Arebia Position: Designer / Checker / Principal Designer

Project March 2002 To Oct 2002: Citgo Conversion Optimization Project Client: Citgo Petroleum Corporation

Position: Principal Designer

Project Feb 2001 To March 2002: Hamaca Crude Upgrader Petrolera Ameriven, San Jose, Venezuela Client: Petrolera Ameriven San Jose, Venezuela

Position: Designer / Checker / Principal Designer

Duties:

v Working at Fluor Daniel Manila Philippines. As a designer I worked independent layout of process plant and process piping using 3D-PDS, and 2D Autocad with true regards to safety and in compliance with national and client Codes and Standards. To be innovative in design work with due regards to minimization of cost while maintaining technical integrity. Efficient interpretation of clients and other design disciplines and suppliers information to ensure project deadlines are met in a timely manner.

v Ensure that the applicable company systems are used, that the relevant QA procedures and standards are followed and that the piping and layout design within his area of responsibility conforms to contract specific requirements and any applicable Client, company, national and international standards, design codes and legislation and raise deviations where necessary. v Received HAT’S OFF award Hamaca Piping Checker for an excellent job not only in maintaining the quality of our deliverables but also in supporting isometric issued milestone and struggling to win over the impression of home office.

From June 1998 To Jan 2001

Company: CMI Construction

Project June 1998 To Jan 2001: Maintenance, Modification, Up-grading, Shut down Client: Caltex Refinery (Phil) Incorporated

Position: Piping / Engineering aid / Supervision

Duties:

v Check that the work permit is valid for the job. Confirm that the line has been drained, vented and isolated as appropriate. Ensure that the tools for the job are available. Ensure proper work execution when blinding and de-blinding lines, when performing the bolt exercise / bolt servicing, alternate unbolting (if 12 bolts 4 loosen 8 remains), clean threads, and provide anti-seize are properly executed.

From Oct 1997 To March 1998

Company: Mitsubishi Heavy Industries Ltd

Under Red Circle Construction Corporation, Batangas City, Philippines Project Oct 1997 To March 1998: Petrochemical Project (Construction), Simlong Batangas City Client: Mitsubishi Heavy Industries Ltd

Position: Piping Supervisor

Duties:

v Manages sub-contractors by locating, evaluating and selecting sub-contractors, monitoring and controlling performance. Supervised construction area assigned, installation of pipe spool to the latest revision, proper installation of valves with correct tags and correct support as per isometric tag. Monitor material needed as per specification.

6

v Meets operational standards by contributing construction information to strategic plans and reviews, implementing production, productivity, quality and customer-service standards, resolving problems, identifying construction management system improvements. v Monitor spool that has been tested, to mark on the control list for every group concern and for progress. Made test flow sheet checked testing pressure base on design, medium, position of pressure inlet, indication of valve open or shut off condition, proper fitting position of blind flange and pressure gauge, besides counter measures of safety works. Test pressure to be conformed in accordance with “ Pipe line Index”. Control and Monitor test package ready for line check, punch- killing item completed, ready for pressure test, tested package. Prepared P and ID, lines for overall leak test. Report remaining punch item and balance test package per area, for work schedule and to push subcontractor to catch-up working target.

v Accomplishes construction project results by defining project purpose and scope; calculating resources required; establishing standards and protocols; allocating resources; scheduling and coordinating staff and sub-contractors; evaluating milestone assumptions and conclusions; resolving design problems; evaluating and implementing change orders. v Maintains safe, secure, and healthy work environment by following and enforcing standards and procedures; complying with legal regulations.

From August 1996 To June 1997

Company: Chiyoda Corporation, Japan

Under Meisei International Ptd Ltd,

31 Gul Lane, Jurong Industrial Estate Singapore

Project August 1996 To June1997: Seraya Chemical Singapore Pte Ltd, Petrochemical Plant Seraya Island Project (SIP) Pulau, Seraya Singapore

Client: Seraya Chemicals Singapore Pte Ltd

Position: Piping QA / QC Engineer Insulation

Duties:

v Ensure that the design consistency is maintained. Coordinate with the testing and punch killing personnel for lines available for insulation. Ensure that the correct specification for insulation of hot and cold line as required. Unsure that all as-built isometric are properly incorporated. From December 1994 To June 1996

Company: CMI Construction

Project December 1994 To June 1996: Maintenance, Modification, Up-grading, Shut down Client: Caltex Refinery (Phil) Incorporated

Position: Engineering aid

Duties:

v Assisting piping supervisor for some engineering related works, assisting in implementing safety at working area, do the house keeping and maintain the working area clean. Supervise fabrication and installation of modified line.

From March 1994 To Nov 1994

Company: P.T. Nippon Steel Construction Indonesia (P.T. Nisconi) Under Sanko Engineering Indonesia, Cilegon West, Java, Indonesia Project March 1994 To Nov 1994: Candra ASRI Petrochemical Project (CAPC) Client: Candra ASRI Petrochemical

Position: Piping Engineer / Designer

Duties:

v Ensure that the applicable company systems are used, that the relevant QA procedures and standards are followed and that the piping and layout design conforms. Efficiently executing the punch list, and execute the punch killing. Supervise all punch item are followed. Monitor all pipe spool that has been tested and installed for progress report. Ensure that all as-built isometric are marked up and filed for costing.

7

From Oct 1990 To March 1994

Company: Fluor Daniel / AG&P Inc. Philippines

Project October 1990 To March 1994: Butane Upgrading Project Valero Refining Incorporated Corpus Christi, Houston Texas

: Hydrocracker Unit Project Valero Refining Incorporated Corpus Christi, Houston Texas

: 105MW Power Plant Project Enron, Pinamucan Batangas City

: Shell Tabangao Asset Renewal Project (STAR)

Client: Valero Refining Incorporated

: Enron

: Pilipinas Shell Petroleum corporation Tabangao, Batangas Position: Piping Designer

Duties:

v During 1990 we used drafting board and used one standard lettering procedure. Doing the plan drawing manually against scaled 3D manual plastic model. Isometric is done manually. Then a year past 1991 Fluor used its own engineering system called FACET the very first time used computer and then comes the PDS 3D.

v Efficiently executing 2D-CAD and Independent layout of process plant and process piping design. Involved in construction phase of the project 105MW Power Plant and STAR project. From July 1989 To Feb 1990

Company: PNOC (Philippine National Oil Company)

Project July 1989 To Feb 1990: Modification and Up-grading Project Client: PNOC ( Philippine National Oil Company)

Position: QC / Welding Inspector Piping

Duties:

v Inspection of fabricated pipe spool against AFC isometric and welding of all joint welded. REFERENCE:

• Sadasivam Vetrichezhiyan

Head of Discipline, Piping

Email Address: ac27v1@r.postjobfree.com

Phone Number: +659******* Office: +656*******

• Ronny Kjonno

Job Title / Position: Shut Down Coordinator ( Former Section Manager) Address: Aibel, Dalegata 71, 6516 Kristiansund, Norway Province / Region Moere and Romsdal

Email Address: ac27v1@r.postjobfree.com

Phone Number: Work: +478*******, Mobile: +474******* Mandatory Courses In Aibel AS

07.2013 : A2 The Way We Work (W3) - An

introduction

05.2013 : Introduction Course

11.2012 : E2 EIS - Design requirements (Statoil)

11.2012 : E3/E4 EIS - Project activities

11.2012 : E5 EIS(Engineering Information System -

Set control object status

11.2012 : E6 EIS - Link tag to document (Statoil)

11.2012 : H0 Intro to requisition & reservation

11.2012 : H1 EIS - Packing for procurement

11.2012 : H2 EIS - Requisitions

10.2012 : A3 Life Cycle Information (Statoil)

10.2012 : B1 Detail Eng Estimation System (DEES)

10.2012 : E1 An introduction to EIS

10.2012 : A1 Aibel Project execution method

Pages 7/7

Joel V, Fernandez

Contact this candidate