To achieve a successful career in a dynamic and challenging establishment where teamwork and leadership play great roles through excellent services and productivity targeted towards maximum success of the company’s objectives.
OTHER NAME: AKPABIO AKPAN
DATE OF BIRTH: 4TH APRIL.
LOCAL GOVT. AREA: IKOT ABASI
STATE OF ORIGIN: AKWA IBOM STATE
CONTACT ADDRESS: NO.2 saw mill road sagamu ogun state.
CONTRCT PHONENO: 081********.
E-MAIL ADDRESS: email@example.com,
CLASS OF DEGREE
PETROLEUM TRAINING INSTITUTE (P.T.I)
EFFURUN DELTA STATE NIGERIA
Higher national diploma (H.N.D) Instrumentation & Control Engineering
Lower Credit Grade
YOKOGAWA ELECTRIC CORPORATION
AKWA IBOM STATE POLTECHNIC, IKOT OSURUA, IKOT,EKPENE
National Diploma (ND) Electrical/Electronic Engineering
ONITOLO COMM. HIGH SCH, ONITOLO, SURULERE LAGOS
Providing process support & Technical supports to clients and in the plant in the area of Automation & Instrumentation; Installation and Maintenance of Field instrument and Pumps in the plant; Work as Instrument/Automation Technician in oil &gas and very good at project management.; Calibration of field Automation Equipment; Programming and maintenance of distributed Control System (DCS); and programmable Logic controllers (PLCs) with good knowledge of Supervisory Control and Data Acquisition (SCADA).
COMPANIES AND RESPONSIBILITIES
1.PACE NIG. LIMITED, ADMIRALTY WAY LEKKI PHASE I LAGOS.
POSITION HELD: Commissioning Technician-Instrument.
FACILITY: TOTAL-EGINA FPSO-LADOL (Contract duration -6months)
I participated in all the safety and security inductions in the FPSO
I carried out loop checks in all the installed instrumentation in the FPSO
I carried out signal simulation and testing of all the installed instrumentation loops
I check to ensure that all the installed control devices are according to the AS-BUILD document
I carried out signal simulation on all the control cables from the field to the DCS
I ensured that all the control valves, transmitters, and control switches are in good working condition by carrying out maintenance checks on them
I carried out minor modifications on control graphics on the DCS/PLC in the control room
I carried out proper technical documentations of my daily work done in the FPSO.
I participated in daily safety talk/Toolbox meeting before I start my day work in the FPSO.
1.HANNO CAPITAL LIMITED, LOKOJA- KOGI STATE NIGERIA.
FUNCTIONAL AREA: Refinery (onshore facility) Start Date: 06/2015
POSITION HELD: Electrical & Instrumentation Technician
DEPARTMENT: Operation and Maintenance. STOP DATE: 02/2018
I Calibrate, test, adjust, install and maintain all process instrumentation in the plant
I Use pneumatic, electrical and electronic testing devices such as Hart communicator, Druk, pressure tester, hydraulic pumps, deadweight tester etc. to inspect and test process instrumentation; I actively involves in instrumentation commissioning exercise in the plant.
I Locate all instrumentation equipment in the process lines and storage vessels via P&ID; carry out installation of all instruments and loop check in the plant on daily basis
I Calibrate and maintain all the instruments/guagesin the process lines according to the acceptable industrial practice to ensure optimum performance during production process
I ensure that all the level, pressure and temperature transmitters are in good working condition 24/7 in the process. Installation & maintenance of all types of motors/pumps including VSD, VFD & VLT in the plant
I Carry out JSA, LOTO and PTWS during maintenance work according to the company’s HSE to ensure risk free working environment in the plant
I ensure that all the transmitters, control valves, sensors and switches are in good working condition to avoid production down time.
I coordinate works with the contractors and even subcontractors and I design P&ID, LOOP Diagrams using Auto CAD and FDS for DCS/PLC (both input & output) for effective delivery of the project
I Carry out proper technical documentation and reporting to my superior on day to day activities
Trouble shooting and maintenance of Automation equipment such as DCS and PLC
Operations of process equipment such as motors, pumps, Boiler & its accessories, Steam turbine, control Valves and power breakers
1.YOKOGAWA ELECTRIC CORPORATION
POSITION HELD: ICSS ENGINEER (TRAINEE 9months), TOTAL OFON II WP8 PROJECT, NIGERIA,
SPONSORED BY TOTAL E&P NIGERIA LIMITED: START DATE: 8/2014. END DATE: 05/2015
SUMMARY OF PROJECT RESPONSIBILITIES
Engineering, maintenance, programming and operations of DCS and PROSAFE RS (SIS)-Yokogawa products in line with IEC61508 and IEC61511 standards. Participate in FAT & SAT of all ICSS products and services.
Installation, engineering, maintenance and troubleshooting of DCS and safety instrumented systems/devices such as fire detectors, gas detectors, safety logic solvers in oil and gas, power/manufacturing company.
Design and implementation of control systems using control blocks and logic programming from the DCS to meet the PLANT requirement.
Process instrumentation and control-installations, troubleshooting/calibration and maintenance of field instruments
Generations of bill of materials, functional design specification (FDS), designing of Nest Loading for instrumentation/Automation project. Power/load calculations for UPS/NON-UPS equipment.
Tuning of PID controller, instrument faceplate design, and designing of process Trends in the process historian from the DCS
Developing process P&ID, and Loop drawings. Participate fully in the designing of ICSS systems to meet EPC spec.
Determination of safety integrity level (SIL) for SIS and Risk Reduction Matrix to meet ALARP standard.
Good project management skills with experience in communication/power point slit presentations.
Control systems graphics design and HMI animations according to EPC spec.
Preparation of VDDR, power & Load calculations for UPS and Non-UPS equipment
Preparation of cause and effect matrix for SIS. Good knowledge of FSM, HARZOP etc.
Preparation of I/O list for field instruments
Good knowledge of the following standards; ANSI, IEC, ASTM and ISA.
Operations and monitoring of plant equipment/process (production operator) in oil & gas platform/flow stations central control room, (CCR) OFON PHASE II WP8 platform own by Total E & P Nigeria Limited.
2.AES (NIG) BARGE OPERATIONS LIMITED-Power Plant. START DATE: 01/2009. END DATE: 11/2011
POSITION HELD: plant instrumentation technician.
Summary of responsibilities:
Carry out pressure test/calibration on pneumatic control valves, pressure transmitters, pressure switches and pressure gauges
Calibration of transmitters; TT, FT and LT etc. Using the latest calibration devices.
Installation/Maintenance of flow meters, gas detectors, flame detectors, fire detectors, and temperature sensors such as thermocouple, RTDs, and safety instrumented systems and fire extinguishing devices.
Carry out instrument pipe fittings/tubing with good knowledge of tubing bending/tape measurement
Involved in loop checks, preventive/corrective maintenance during major plant overhauling base on the plant Loop Drawings and P&IDs. Carry out calibration/simulation on control valves/valve positioner in the plant.
Simulation of sensors/detectors in the plant periodically. Carry out instrument loop checks periodically.
Follow proper safety procedures before carrying out any maintenance task in the field such as; JSA, PTW and LOTO. Filling/recharging batteries, servicing of spark plugs, servo-motors (valves), flame detectors/F&G detectors.
Installations and trouble shooting of electric motors, transformers and breakers.
Report incidences/near misses to the maintenance Team Lead. Good at the use of CMMS.
Calibration of pressure switches, level switches, and temperature switches.
I always work in a team with my team members and I can lead a team.
1.Control system soft wares: ( CS 3000, CENTUM VP)
2.MS Excel 2012
3.MS PROJECT 2010
4.MS VISIO 2010
5.MS word 2010
6.AUTO CAD: 2014 VERSION
7.Logic program language: LC64, ST16, FBD, LD, SEBOL.
LANGUAGE SKILLS: English (Fluent in Speaking and written).
1. Peter A.Dickson,Zonal Technical Manager,NERC 2.The Director Yokogawa Nigeria Ltd, Hassen Near
South-South Zone,Davandy House, 43MM Way, UAC, Ojota Lagos state.Tel: 080********
Calabar Cross River State. Email:firstname.lastname@example.org
Tel: 080******** Email: email@example.com