Project Microsoft Office

CURRICULUM VITAE

CORRESPONDENCE ADDRESS

Door no-1/46 periar nagar padappai

Chennai tamilnadu

Mob.No-956-***-****,

DHARMENDRA SINGH E-Mail **-*********@*****.***

Objective

To achieve a platform were I could utilize my technical skill in a best possible manner to contribute in the technological devolvement in organisation.

Technical Qualification

(a) Diploma in Plastic mould Technology (DPMT) from Central Institute of Plastics Engineering and Technology chennai in 2009 - 2012 .

Academic Qualification

High School from U.P.BORD in 2007,

Intermediate from U.P.BORD In 2009.

Computer Skills

AutoCAD – 2006 TO 2014, AutoDesk Inventor

Dellcam-2006 to 2015,UG, NX6,MicroSoft Office

Presently Working experience

Working with POLYPLASTICS AUTOCOMPONENTS PVT LTD, as a Engineer. In New product development(NPD) since 12.july.2017

COMPANY PROFILE:

Polyplastics Auto components Pvt Ltd., located in Nissan supplier Park, and the plant produce Injection molded parts including Wheel rim covers. The major processes of this plant – Molding, Painting & Assembly. Polyplastics has four other plants located at Yamuna agar, Pune & Bhiwadi.

Customer: Renault Nissan – Chennai (Oragadam)

JOB PROFILE:

Developing Injection molding Tool with right quality within target schedule.

Involving in Tool Trial & Process Trial for Automotive Exterior parts

Developing of Assembly Fixture by Co coordinating with Supplier

Exterior parts validation follow up with Testing supplier as per Schedule

Product & process design validation as per drawing requirements

Tool Trial & Process set up at In House and Sub Supplier plant

Involving in Tool Trial & Parts Supporting to customer build as per Schedule

Identifying the Root cause for all Concerns occurred during In House Trial & Customer end build.

Process Improvements for Achieving Capable process

Developing & Validating of Checking Fixture against Product requirements

Preparing APQP Documents phase wise & Process Documents

Rejection analysis and to take corrective action.

List out the issues needing improvement for production stage.

Developing right quality of parts to support desired production levels following APQP process

Study the received drawing and to confirm the manufacturability

Developing Raw material & Color development by Coordinating with Supplier

Involving with Trial & Identifying Countermeasure for Tool concerns

Proposing Engineering changes for Quality Improvements

Maintaining clear and on time communication with Customer and also with Supplier

Preparation of Timing plan for New Product development & Supporting the Parts to Customer build at right time

Preparing PFMEA, Control plan & Inspection standards

Product validation as per Design requirements & Preparing Inspection reports

Identifying Poka yoke for Controlling Process Preparing all PPAP Documents & PSW Submission to Customer

Supplier Localization for Imported material and cost reductions

Poka Yoke Identification & Implementation in Process for Quality Improvement (Kaizen)

Preparation of Monthly Report ( MRM - Review )

Giving training to Operators & Inspector for Product knowledge & requirements

Project handling

HHA project- E3&E4 grille&Bspm parts Renault Nissan project

XBA project-E4 style wheel cove part Renault Nissan project

PB1D project-Hub cap part Renault Nissan project

B02A project-centre cap part Renault Nissan project

K2D project-centre cap part Renault Nissan project

I2 project-smart auto drive emblem Renault Nessan projact

Key Projects Handled:

Mould Design Det

Working experience

Working with Clastek Engineering pvt ltd, as a Design Engg. in Design since 09.apr.2015

Company Profile

Clastek Engineering Pvt Ltd mould design&makes moulds for interior and exterior parts. Like, Pillar Trims, Garnishes, Instrumental panel child parts (clusters, Central fascia, Glove Box, steering column cover, storage box), Door Trims, Bumper parts, Console, Under bonnet parts Fan shroud, Cylinder head cover, Engine cover ) Expansion tank and Air filter parts, Seating parts, HVAC parts etc.

Job Profile

Feasibility study

3d mould design of plastic product

Modification of moulds(part modification.

2d detailing

Assembly drawing ensure to tool room

Attend the review meeting at customer end

Customer handling for particular mould

Co-ordinate with tool room for any rectification.

Interaction with vendors for outsourcing.

Reduction in Customer complaints.

Achieve excellence through continual improvemen

1)CONSOLE BODY (FIAT project)

This project is tough challenge to design with 3 big sliders around the part actuated by Hydraulic cylinder. So many Design review conducted with General motor (GM) for final design approval .Another tough task is lifter actuation under block ejector .This project designed as 1 cavity with 3 sliders by cylinder 1 slider by FC,7 lifters, double ejection mechanism to avoid part catch up in block ejector & hydraulic cylinder ejection for 1300T machine.

Role

: 3d modeling & 2d detailing.

Tools Used

: Delcam, AutoCAD

Client

: International automotive component (IAC)

2)GLOVE BOX LID (2CT- HONDA project)

Injection and ejection planned same side for this part .Design review conducted with Japanese team for undercut actuation and part quality. Special mechanism used for 30 degree shoe angle movement slider .This project designed as 1 cavity with 5 sliders, 7 lifters, hydraulic cylinder ejection for 450T machine.

Role

: 3d modeling & 2d detailing.

Tools Used

: Delcam, AutoCAD

Client

: MORIROKU

3 )HOUSING HEAD LAMP LH & RH (U237-TVS project )

This project is designed with 2 cavities .Solid lifter construction is tough challenge for this part. This part designed with 8 solid lifters for 450T machine.

Role

: 3d modeling & 2d detailing.

Tools Used

: Delcam, AutoCAD

Client

: TVS

4)RADIATOR GRILL UPPER-MIC (M 300-GM PROJECT)

This project is designed parallel with housing grill mould. For this project also 5 hot drop positions finalized after long review with customer. Special Block ejector mechanism is used for this part and the part designed with 5 sliders and 6 lifters for 500T machine. Hydraulic ejection is planned for this mould.

Role

: 3d modeling & 2d detailing.

Tools Used

: Delcam, AutoCAD

Client

: TACO

Working experience

Working with central tooling motherson india Ltd. Chennai oragadam as a Asst Engg in design from 02 dec.2012 to 16 feb 2015.

Company Profile

CTMIL caters to medium to large sized tooling requirements of automobile manufacturers and white goods manufacturers (starting from 250 ton to 3200 ton injection m/c moulds).

Job Profile

Responsible for mould design

Responsible for 2d design

Responsible for electrode design

Achieve excellence through continual improvement.

Reduce the customer rejection.

Personal Data

Father’s Name : Shri Rajchandra singh

Date of Birth : 15/08/1991

Marital Status : single

Nationality : Indian

Language Known : Hindi, English,tamil

Permanent Address : door no-422A L.D.A Kaloni

Hind nagar Kanpur road

Lucknow U.P

Declaration

I hereby declare that all the information mentioned above is true and to the best of my knowledge.

Date:

Place: (DHARMENDRA SINGH)

Contact this candidate