Power Plant Project

CURRICULUM VITAE

B.SYED USMAN,

QUALITY CONTROL / INSPECTION ENGINEER,

Email: ****.*****@*****.***

Contact: 832**-*****, 812**-*****.

OBJECTIVE

Seeking challenging and growth oriented opportunities in the field of QA/QC engineering with reputed Construction Industries (Oil &Gas Refinery /Steel plant/Power Plant)

ACADEMIC

Bachelor of Engineering in Mechanical.

Vinayaka Mission’s Kirupananda Variyar Engineering College,

Affiliated with Periyar University.

Salem-Dist., Tamilnadu, India

TECHNICAL QUALIFICATION

NDT- American Society for Non-Destructive Testing (ASNT)

ASNT Level II- RT, UT, MT, PT, as per SNT-TC-1A

WELDING

CSWIP 3.1 Welding Inspector (Certificate No 695778)

EXPERIENCES IN:

Oil & Gas Plant, Power Plant Project & Steel Plant Project.

ORGANISATION NAME : Reliance Corp IT Park Ltd,

PROJECT NAME : Export Reliance Refinery.

DESIGNATION : Manager (QA/QC)

DURATION : 22.10.13 to till date

LOCATION : Jamnagar, Gujarat

ROLE & RESPONSIBILITY

Reviewing the documents like Project Specifications, Procedures, and ITP

Conduct all stage-wise Inspection as per approved QCP/ITP with Client, Owner & Third Party

. To check physical condition (free from Kinks, bend, twist & straightness within limits)

Before cutting any pipe to ensure heat no, Mat code no, transfer to all required pieces.

To check the Material by PMI for Low Alloy Steel (LAS), Stainless Steel (S.S) and Nonferrous Material

Selection of correct WPS for all Weld joint in the spool/pipe line as per ASME Sec-IX

Experience in welding visual inspection & Painting Inspection as per specification and standards to inspection wherever applicable.

Conduct Dimensional Inspection before and after welding to ensure the require dimensions to meet the reference drawing.

Monitoring welding activities before and during fabrication are performed as required by WPS.

Check and verify the control of storage of welding consumable.

Ensure Preparing welder wise lot registers for covering NDE requirements.

Monitoring of welder performance every week based on the NDT report.

Ensure Preheating, Post weld heat treatment is carried out as per approved procedure

To guide the welders to make sound weld.

To witness Welder qualification test and review radiography report.

Interpretation and evaluation of PT, UT, RT,MPI and Visual Inspection as per ASME 31.3 & AWS D 1.1 and review of NDT reports.

Ensure and monitoring ISO clearance & Mechanical (welding & NDT) clearance for Hydro Test Packages and review the Loop file for HT.

Preparing and clearing the punch points with client and the same to coordinate with client to liquidate the punch points of Cat. A & Cat. B. and Box up of the system for handover to operation team.

Witness Hydro test, Pneumatic testing and Hardness testing with client

Monitoring work in progress for compliance with the latest approved revisions of drawings and specifications and verifying that finished work meets acceptance criteria.

Monitoring calibration status of Welding Machines, Pressure gauges and all instruments.

Inspection of raw materials for fabrication and clean built of Pipes & Spools.

Carry out root cause analysis to reduce the repair percentage in welding activities.

Rectifying repairs with qualified workers, re-inspecting in accordance with specifications

Ensure all records such as PAR, CAR, NCR, etc. Are maintained as per project requirements and QMS.

Surveillance of site activities to ensure the work is progressing in a/c to ITP

Report generation and documentation for all the QC works carried out at site

PAINTING

Monitoring the weather condition for surface preparation & painting / coating application.

Execute painting /coating inspection work as per project inspection test plan

Verify the Calibration Certificates for the testing instrument gauge etc..

Check the blasted Surface for roughness achieved and degree of surface cleaning as per ISO 8501-1

To check the blast surface with SCM 400 machine.

Verify the primer coat DFT and Visually check the Painted Surface,

To ensure the primer coat Curing time for over coating,

Check the Adhesion Test as application of ASTM D-3359

ORGANISATION NAME : Nagarjuna Construction Company Ltd,

PROJEC NAME : IISCO Steel Plant

DESIGNATION : Assistant Engineering in Quality Control (Fabrication)

DURATION : 23.09.2009 TO 11.10.2013

LOCATION : West Bengal (Asansol)

ROLE & RESPONSIBILITY:

Preparation of Method Statements, work instructions, QAP/ITP and all procedures related to QA/QC.

Conduct all stage-wise Inspection as per approved ITP with Client, Owner & Third Party.

To be monitoring before welding like Weld Edge Preparation (WEP),

To handling welding process like SMAW, SAW and GTAW process.

To be Inspects before Welding like root gap, root face & Alignment Checking etc.

Welding control by monitoring filler metal handling, inter pass Temp Control, etc

To be Checking & Monitoring Post Weld Heat Treatment if applicable for higher thickness.

Handling Carbon Steel, Low Temp Carbon Steel, Alloy Steel, Stainless Steel,etc

Making Welder Performance Qualification Record, etc

Conduct Dimensional Inspection before and after welding to ensure the require dimensions to meet the reference drawing,

Report generation and documentation for all the QC works carried out at site,

ORGANISATION NAME : Reliance Engineering & Associated Private Ltd (REAL)

PROJECT NAME : Export Reliance Refinery.

DESIGNATION : Construction Engineering in Welding.

DURATION : 18.10.2007 to 30.08.2009

LOCATION : Jamnagar, Gujarat.

ROLE & RESPONSIBILITY:

Raw material identification & Review of T.C, as per ASME Sec. II

Material identification made as per isometric Drawing and our project specification

Material marking and cutting inspection & checking Alignment of fabricated spool as per Drg

To Reviewing of contractor ITP, QAP, WPS/PQR as per code & job requirement.

To witness Welder qualification test and review radiography report

To verify the welders Qualification & Certification as per ASME IX

To guide the welders to make sound weld.

To selection of welding procedure specification for all weld joints

To check the qualification welders are performing welding/tacking within the range of Qualification.

To check preheating, inter pass temperature & post heating temperature as application.

All type of inspection like PWHT, NDT,PMI, Hardness test etc as per job requirements

Preparation of QA/QC reports of fabrication & erection works.

Knowledge of welding of critical material grade like as P5, P9, P11 & P22.

Knowledge of welding process as like SMAW, GTAW, FCAW&SAW.

Interpretation of UT, RT, MPI & DPT during testing at site

Report generation and documentation for all the QC works carried out at site,

ORGANISATION NAME : Quest (Quality evaluation system team Pvt, Ltd)

PROJECT NAME : Atomic Power Plant

DESIGNATION : Quality Surveyor in Fabrication

DURATION : 11.12.2006 to 09.10.2007

LOCATION : Kalpakkam, Tamilnadu.

ROLE & RESPONSIBILITY:

As per client’s drawing to ensure that all materials are Conforming to the specification

To ensure drawing & our customer Quality Plain and application standard etc.

To check the Weld edge Preparation (WEP) before welding process

To check the dimension before welding process

To handling SMAW and GTAW process

To handling carbon steel material & stain less steel materials.

Making Welder Performance Qualification Record, etc

Conducting Welder Qualification Test,

To witnessed the Hydro test & Pneumatic Test

ORGANISATION NAME : Salem AutoMech (India) Private Ltd

PROJECT NAME : Power Plant Project

DESIGNATION : Inspection Engineer

DURATION : 09/08/2003 to 08/08/2006

LOCATION : Salem, Tamilnadu.

ROLE & RESPONSIBILITY:

To ensure drawing & our customer Quality Plain and application standard etc.

To handling mild steel material, carbon steel material & stain less steel materials.

To check the weld edge preparation (WEP) all thickness materials before welding.

Inspecting the dimension before welding and after welding process.

To handling welding process like SMAW, SAW and GMAW process.

Inspecting pre heating, post heating & post weld heat treatments

Inspect the fabricated Power plant Components like CEILING GIRDER, COLUMS, TUBULAR AIR PREHEATER,DUCTS,HOPPER,GATE & DAMPER.,etc

Making all Non Destructive reports like, PT and MPT

To be monitoring and profile checked Sand blasting and Painting.

PERSONAL DETAILS:

Father’s name : Basheer (late)

Date of birth & age : 04.07.1980 & 36

Sex : Male

Marital status : married

Nationality : Indian

Languages known : English, Hindi & Urudu,

Address : 21, K K Nagar

Maramangalathu patty (PO)

Salem steel plant

Salem – 636 030

Mobile Number : 83208 – 99681

Driving Licence : Indian (Tamil Nadu)

PASSPORT DETAILS

Passport No : P 8270397

Valid Up to : 20.02.2027

DECLARATION:

I hereby declare that the information given above is true to the Best my knowledge.

THANKING YOU,

Yours faithfully

PLACE : Jamnagar

DATE : (B.SYED USMAN)

Contact this candidate