jahanzaib aslam

Cell: (PAK) +92-323-******* (HOME) +92-332-*******

E-mail: ac1mgb@r.postjobfree.com Skype ID: jahanzaibbyco

APPLIED FOR: PROCESS PLANT OPERATOR

Objective: Seeking to find a challenging position in the oil and gas industry as Operator within a company that offers me to use my experience to best serve the needs of the company and improve its bottom line profitability.

EXPERIENCE SUMMARY

(Total 10+ Years Experience Senior Operator DCS (Yokogawa System Centum CS 3000 & Honeywell Experion PKS 431.3) in Oil Refinery). I have successfully accomplished UOP Process Technology Training. I have also worked during Commissioning of Byco Oil Refining Complex ORC-II (120,000 BBL/day), NRL Oil Refining Complex Phase-I Project & Turn around in (2010 & 2014).

Professional Experience

National Refinery Ltd(NRL)( Pakistan Complex Refinery).

(As Senior Refinery Operator from Oct 2014 to Still working)

BYCO Petroleum Pakistan Limited( Pakistan Largest Oil Refinery).

(As DCS/Console Operator from July 2010 to Oct 2014).

ICI PTA Pakistan Ltd(Petrochemical).

(Process/Field Operator from july 2009 to july 2010)

NOVATEX Petrochemical Pakistan Imited.

(Production Operator from july 2007 to july 2009)

Working Areas

DHDS(Diesel Hydro Desulphurization Unit).

NHT(Naphtha Hydrotreater Unit).

LPG(LPG Separation Unit & LPG Sweetening Unit).

CDU(Crude Distillation & Desalting unit).

ATU(Amine Treating Unit).

Responsibilities & Routine Work

Monitor and control all process parameters of plant independently from DCS (Yokogawa & Honeywell ) Control Room.

Smooth and Safe start up and shutdown as per SOP and under the direction of Supervisor.

Excellent Knowledge about Smooth Controlling the process different types of Controllers such as (Cascade Controllers/Split range Controllers) smoothly takes on AUTO/Manual as per process conditions.

Take quick & safe corrective actions in case of any equipment failure process upsets as per SOP and under the direction of shift supervisor.

Maintain production Capacity and Product specification as per target sheet.

Communicate with field operators for plant adjustment equipment switched over and daily routine adjustments.

To assist the supervisor in day-to-day activities by providing proper feedback and Maintain product specification as per lab results. In case of emergency situation, take appropriate actions as per ‘emergency procedures and contingency plans. Safely shut down the affected Plant partially or totally. To restore the Plant to normal operating conditions safely and efficiently once the situation is normalized. To record all the activities that occurred during the shift

Check all equipments performance abnormalities such as high temperature/high pressure/abnormal sound Maintain and prepare log sheets for assigned units and system covering operating data

Takes units samples in accordance with established schedules and makes unit adjustments to equipment as directed& Prepare adjust chemical injection/rate/inventory for assigned units.

Provide work guidance to Junior field Operators and coordinate their activities in keeping with SOP & instructions complying with company’s HSE policy.

Prepare Daily Production Report and Consumption Sheet’ which indicates stock of various plant chemical. Communicate with Oil Movement person for preparation of crude feed tank, crude inventory/loading status.

To initiate work request for maintenance in case of equipment/instrument failure in co-ordination with field operators & shift supervisor. Follow-up work permits, take equipment/instruments out of service for maintenance and to take back in service after maintenance intervention.

Handling Plant Emergencies during the shift such as operating problems or equipment failure power failure instrument air /cooling water system/steam failure take immediate action under the direction of supervisor.

Excellent knowledge about Instrumentation /process control system and understand P&ID (piping and instrumentation diagram) and PFD (process flow diagram).

Responsibilities As Pre-Commissioning/Commissioning

Flushing, Blowing & Steaming.

Witness De watering Dry out SS(Sub systems)

Plant Lineup for startup/Pre commissioning/Commissioning

PSSR(Pre Startup Safety Review) of sub systems

Preparation of punch list/Check List/Blind List/SCD.CSO.CSC List

Compressor/Turbine test run/ Over speed tripping test and preparation Equipment for test run.

Preparation of PTW

Hydro test / Hold Test

Work permit verification & confined space entry attend.

Consistency check of the plant with respect to approved P&IDs

Internal inspection of columns/vessels etc

All lines, columns,vessels etc. are properly flushed, cleaned & dried

Column /Vessel Box up/Internal Inspection

Furnace Light up/Startup/Refractory dry out

Tightness test of the systems, leak test, hydro test etc

Loops / interlocks checking

Solo Run of Pumps Trial run of pumps.

All PSVs / SDVs checking

Start up as per method of statement

Commissioning/Pre-Commissioning/Master Startup/Turnaround Project)

I participated in NRL phase-I 2017 Commissioning/Pre-Commissioning/Master startup activities as a DCS Operator.

I participated in BYCO ORC-1(Oil Refining Company 1) 2014 Turnaround and Master startup all Commissioning activities as a Commissioning Field Operator.

I participated BYCO ORC-2(Oil Refining Company 2) 2012 Commissioning/Pre-Commissioning/Master startup activities .

Hands On Experience

Compressors High pressure Single and multistage (centrifugal/reciprocating)

Pumps High pressure Single and multistage (centrifugal/reciprocating)

Distillation Columns, Strippers/ Three Face/Two Face Gas Liquid Separator

Furnaces(Vertical and Box Type), Catalyst Reactors, Re boilers(Fired/kettle & Thermo siphon type)

Fins fan Coolers, Trim Coolers, Heat exchanger, Condensers

Achievements

Essentials of Petroleum Refining 35 credit hours course from Byco Petroleum Pakistan Limited.

Involved as Project Operator in erecting and commissioning of Unit at ORC-II and NRL.

Permit to Work System

Equipment Disjointing Permit Preparation

Cold work permit & prepare equipment for cold work

Hot work permits & prepare equipment for Hot work.

Confined space entry certificate & prepare equipment for cold work

Health Safety Environment

H2S Awareness and Protection training two days by BYCO Training centre

Compliance for the use of PPE’S (Personal Protective Equipments)

Practical training for the use of fire fighting equipments.

Safety Trainings

Confined Space Entry (CSE)

Working at Height

Fire Extinguishers

Hydrogen Sulphide (H2S)

Authorized Gas Testing (AGT)

Emergency Response (ERT)

Education & Qualification

2011 to 2013 B-TECH (HONORS) in Chemical Technology from Newport Institute of Higher Education.

2009 to 2011 B-TECH (PASS) in Chemical Technology from Indus University.

Bachelor Of Science (B.Sc) HEC Accredited With Chemistry, Physics, Math From Govt Degree Science College Sindh.

2004 to 2007 Diploma (DAE) in Chemical Technology from Government College of Technology Karachi.

Personal Information:

Father name Muhammad Aslam

Date of birth/ Religion 15/11/1986 and Islam(Sunni)

Home Address House # 6, Block # 50, Area 5-D, Landhi # 6,

Karachi, Pakistan.

Phone Home +92-323-*******, +92-332-*******

Passport number/ Nationality QP1805861/Pakistani

Computer Skills:

Internet, Ms word Ms office

Extra Activities

Facebook

Contact this candidate