Completion Engineering

Name : Carlyle Rampersad

Date of Birth **th January 1964

Address : ***** **** *** ******** ****** NY 11355

Phone Contacts : 1-868-***-****

E-mail : *******.*********@*****.***

Career Summary :- To advise and provide Completion Engineering and Supervisory services. .

Experiences:- Sept 2015- Jan 2016. Completions Engineering Advisor with Halliburton Project Management – Barmer, India.- 4/4 Rotational work schedule.

Work Summary : Responsible for the completion planning, design and execution for two (2) CTU and two (2 ) drilling rigs on a land based operation. Coordinated rigless wireline and slickline operations.

Highlights; Quick adjustment and adaptation in a result oriented program that was required on the tail end of a rig less completions project and a drilling rig completion contract.

Specific responsibilities were :

Preparing the completion and work-over programs for the two (2) drilling rigs and the two (2) CTU.

Reviewed the Design of Services from the vendors for the execution phase.

Monitoring the day to day rigless completion activities on both the coil units and provided recommendations for optimizing day to day operations.

Support and advise the Drilling Engineers on completion operations and practices.

Providing input into the Learning register.

Preparing the weekly field tracking schedules and the field progress reports for office management.

Experiences:- Dec2007- Feb 2015. Consultant Senior Completions Engineer with ADDAX PETROLEUM – Lagos, Nigeria.- 4/4 Rotational work schedule.

Work Summary : Responsible for the completion planning, design and execution with supervision on the subsea, jack-up and land rig completion operations.

Highlights; Optimized the completion designs for long term production and cost effectiveness on the projects. Gained exposure into Deepwater drilling operations ( Water depths +/-2500 ft) and ESP well testing. Successfully able to integrate technical solutions that were cost saving and time efficienct.

Specific responsibilities were :

Adapting to a difficult and highly intensive work completion environment with only two (2) Completion Engineers to handle one (1) Semisubmersible, two (2) Jack ups, two (2) Land rigs for the planning, execution and evaluation of completions.

Preparing the Intelligent well and Horizontal type completion and work-over programs for the subsea operations using a semisubmersible type rig. Water depths +/-800 ft )

Preparing the completion and work-over programs for two (2) jack up rigs.

Assisting the Principal Drilling Engineers to prepare the Completion and Work-over Programs and Abandonment programs for the Land and Work-over operations.

Preparing and presenting the CWOP, WWOP, Risk Registers and Challenge Sessions. Presenting the AAR within one (1) week of completion of the wells.

Monitoring the day to day completion rig activities on all the rigs with the Drilling Superintendents and to provide recommendations for the day to day operations.

Provided well-site supervision for cased hole gravel pack, frac pack and intelligent well installations.

Preparing the equipment forecasts and the tracking of equipment for anticipated work on the land, jack-up and subsea rigs.

Assisting in the preparation of Cased hole and Open-hole Completion Tender documents for Sand Control, ESP’s and Intelligent Type Completions for both the Land and Subsea operations.

Witnessing the QA/QC workshop testing on critical intelligent well components. (SIT’s, FAT’s and flow assurance.) in addition to new type completion tools.

Preparing and lecturing on completion courses to young drilling engineers. Provided mentoring sessions to young drilling engineers on completion policies, practices and standards.

Provided the input to an Operations Completion Manual with guidelines, procedures and QA/QC instructions.

Worked with the Well testing engineers for the equipment requirements for exploration wells for high pressure testing and ESP well testing.

Reviewing and/or preparing the Basis of Design and Concept Select documents for specialized ESP and Extended reach selective type horizontal well completions.

Sept 2006 – Dec 2007. Drilling and Workover Engineer with SAUDI ARAMCO – Dhahran,Abqaiq - Saudi Arabia.- Residential.

Work Summary Drilling and Work-over Engineer on Desert type Land operations. Provided on-site rig coverage for the selection of casing points and on critical completion installations.

Highlights : Successfully integrated managed pressure drilling with Completions. Successful deployment of horizontal completions with isolation packers under complete losses in carbonate reservoirs.

Specific duties were :

Designing and delivering the drilling programs for exploration wells.

Preparing the drilling, completion and work-over programs for the Ghawar field. These included vertical and horizontal producers and water injectors. Also, the well planning and the designing of completion wells for reservoir monitoring that required specialized equipment and procedures. Prepared the final Well completion reports.

Daily Monitoring of the onsite operations and the provision of engineering services. Onsite coverage for critical casing points selection and on critical job applications.

Analyzing new and innovative completion systems including solid expandable tubulars, swell packers, MPAS packers and production equalizer systems in selected candidate wells.

Mentoring young drilling and work-over engineers integrating the drilling and completion phases of the operations.

Aug 2005 – Sept. 2006. Senior Product and Completions Engineer with Baker Oil Tools for BHP BILLITON – Port of Spain, Trinidad.

Work Summary Senior Completion Advisor for all Baker Oil Tools product lines for cased and openhole applications.

Highlights : Assigned at tail end of project and successfully applied root cause analyses of problems experienced in the project.

Deliverables included :

Providing all the engineering input into the design, running and installation procedures for the operational aspects of the completion (Upper and Lower ) including liner hanger/ECP assemblies.

Co-ordinating and participating in all the assembly make up, inspection and pressure testing of the completion equipment with the completion installation technician.

Recommending on the equipment and design assemblies. Keeping track of inventory and timing of equipment delivery.

Participating in the End of well Reviews. Providing an End of Well Report. Presenting a Quarterly Review of Performance.

Providing the root cause analysis of all incidents, non – conformance and failure investigations.

Jan 2003 – Aug 2005 - Desk Engineer to Trinmar - Senior Completions Engineer with Baker Oil Tools. – TRINMAR, Point Fortin, Trinidad.

Work Summary Senior Completion and Work-over Desk Engineer for BOT to the local national oil company.

Highlights: First Multilateral well completion planning and execution. BOT Integrity awarded in 2005. Successfully managed completions in an intensive work environment with high HSE standards. Experienced as a Workover Specialist and as a Frac/GP specialist.

Main duties included :

Developing the strategy including the scope of works with risk weighted time and cost estimates for completion and work-over operations in an offshore environment.

Monitoring the daily completion and work-over activities, providing engineering and technical support on one (1) Drilling Jack up rig, two (2) Work-over Jack-ups, one (1) Platform rig, and one (1) Non-Rig Lift Boat.

Heavy work-overs job executions that included recovery of dual completions and stacked packer completions, fishing gravel pack liners and standalone screens in horizontal wells, Pulling stuck TCP guns and PCP pump installations. Milling and recovering Liner hanger systems, milling packers, screens and tubing.

Light work-overs that included interventions with slickline, wireline and coil tubing units for remedial and stimulation type jobs, well cleanouts and production logging. Thru-Tubing perforating on electric line and the setting thru-tubing bridge plugs.

Providing the technical specifications and selection criteria for all surface and subsurface equipment on work-over and completion installations in Trinmar operations.

Designing and executing hydraulic stimulation that included sand frac packing and acid fracturing, high and low rate gravel packing in new cased and open hole applications, and work-over wells.

Involved in the development and execution of completion installations, well testing and intervention activities. This included the operational programs with contingencies and the well completion reports with recommendations.

Provided wellsite supervision for the execution of TCP perforation jobs, GP and Frac pack sand control jobs on cased and openhole completions. Very familiar with Schlumberger, BJ and BOT pumping and completion hardware services.

Involved in the tender preparation and evaluation of services for contractor selection.

Assisting in the mentoring and training of four (4) junior engineers in work-over and completion operations. This led to their career advancement in major operator and service companies.

Worked in the drilling and work-over Front End Loading team that did the first multilateral well in Trinidad for Trinmar. (S-836).

Jan 2001- Jan 2003 Senior Petroleum Engineer with PETROTRIN. Point Fortin and Santa Flora Trinidad and Tobago

Work Summary Petroleum Engineer primarily focused on maintaining and optimizing production.

Highlights: Completed examinations leading to a Master’s degree in Petroleum Engineering. Awarded Post Graduate diploma. Kept maintenance costs low by efficiently tracking well operations. Experienced at increasing oil production through well servicing, workovers, and re-completions.

Additional duties were :

Involved in the work-over, completion and execution phases for land based well operations. The artificial lift type work included Gas Lift, ESP, PCP rod pumping and Beam pumping.

Recommended well candidates for work-over and completion including preparing the time and cost document with oil production increase justification. Prepared the work-over and completion programs for the coil tubing, wire-line and slick-line work.

Sept 1999 - Dec 2000 – Personal Leave. NY, United States of America

Personal circumstances affected my work schedule. Worked as a High School Mathematics Teacher.

Continued personal training and development in Networking, Computer Repair, Microsoft software and in Project Management.

Mar 1998 -Aug 1999- Rotating Wellsite Drilling Supervisor with IPM Schlumberger for SHELL. Lima, Peru.

Coordinated and supervised the drilling and testing operations on an exploration drilling venture with Shell as the operator in Peru on Project Camisea. Handled the logistics for the personnel and the equipment on site for the tail end of project.

Mar.1995- Mar 1998 - District Engineer with BAKER OIL TOOLS. San Fernando, Trinidad and Tobago. Caracas, Venezuela.

Work Summary To provide engineering support to the Product Line Specialists for the deployment of BOT completion products and systems on the rig. Supported the Sales and Marketing department with operational advice to the client.

Highlights: Successfully introduced the Window master system to Amoco Trinidad leading to significant cost savings on sidetracking operations and for the future planning of multilaterals. Successfully integrated the completion product lines into completion systems for the client, resulting in cost effective completion solutions.

Specific duties were:

Developing and preparing the completion programs for major clients using new and innovative completion strategies and equipment.

Gaining familiarity on the major product lines in Baker Oil Tools both for cased hole and open hole applications including flow control, liner hangers, packers, remedial and stimulation, gas lift, Fishing, inflatables (ECP’s and Thru Tubing) and multilateral systems levels ( 1-5)

Marketing the Window-master whipstock system in Trinidad which was successfully implemented by the major operators including Amoco, BG and BHP Billiton and Texaco.

Provided Well-site Engineering coverage to the Tool Specialist for the running of new Product Line systems.

Jan 1990-Mar 1995 - Drilling and Completions Engineer with AMOCO TRINIDAD OIL COMPANY. Galeota Pt, Trinidad and Tobago.

Work Summary Drilling and Completions Engineer for the planning, executing and evaluating on all well operations including well-site coverage.

Highlights: Part of the Drilling team for the 1st horizontal well done in Trinidad. Placed 2nd in the Murchison Drilling school attended that year. Seized the opportunity to acquire rig and office experience in a fast track development program. Progressed as an engineer familiar with working from ‘cradle to grave’ in design, execution and evaluation of projects.

Roles and responsibilities included:

Designing, executing and evaluating drilling and completion operations in an offshore environment on exploratory and development wells on both jack ups and platform type rigs.

Monitoring the daily drilling and completion operations and providing technical and engineering support for day to day activities.

Reviewing and evaluating new and innovative drilling strategies to reduce the time and cost on operations and to improve drilling efficiency.

Worked on a 7/7/7 ( rig/office/off) work schedule for two (2) years. Functioned as a Well-site Drilling Engineer on Exploration and Development wells and as a Relief Company man on critical well operations, rig moves and non-rig operations.

Co-authored a paper with Senior Drilling Engineer with Amoco Trinidad entitled “LCM mud systems in MWD tools”.

Preparing the tender documents for contractor services for drilling and completion operations. Evaluating the technical requirements on tenders with recommendations.

Worked with the drilling and completion team that did the first horizontal well in Trinidad. (Immortelle 8).

Sept 1989 - Jan 1990 - Junior Petroleum Engineer with PRIMERA Oilfelds. Fyzabad, Trinidad and Tobago.

Assisted the Senior Petroleum Engineer in the re-activation of old and idle wells.

Recommended wells for work-over operations including swabbing, plunger lift, and chemical treatments for wax, paraffin and asphaltene treatments.

Education:- Post graduate Diploma in Petroleum Engineering. University of the West Indies, St Augustine, Trinidad and Tobago (2003). MSc. in Petroleum Engineering exams completed.

Bachelor of Science degree in Petroleum Engineering. University of the West Indies, St Augustine, Trinidad and Tobago (1988).

IWCF Certification ( Surface and Subsea – valid to 2017), BOSIET valid to 2019, UKOOA valid to 2017.

Add'1 Ed.:- Various courses and certifications in Drilling and Completion Technology. (Available on request.).

Referees : Biswajit Ghosh – Snr. Drilling Engineer – ********@*******.***

Aziz Ali – Drilling Superintendent – ****@****.**

Suresh Ramlogan – Production Manager – ******.********@*********.***

Contact this candidate