Engineer Project

*

Leila Jaberi, P.E.

Control Systems Engineer

1-832-***-****, *****.******@*****.***, Houston, TX 77057 Experience Summary

Licensed Control Systems Engineer experienced in the design and engineering of field instrumentation and control systems for offshore, onshore, and petrochemical facilities in EPC projects with lump sum and cost plus basis. Experience include Pre-FEED, FEED, and Detail engineering for instrumentation selection, sizing, datasheets, procurement, and vendor document review. Reviewed and marked-up P&IDs. Preparation of instrument indexes, I/O lists, cause and effect matrixes, functional block logics, instrument data sheets for in-line, on- line, and analytical instruments, level sketches and calculation, pressure relief valve sizing and selection, cable schedules, voltage drop calculations, Junction Boxes, wiring diagrams, loop diagrams, and installation details. Performed sizing, selection, and procurement of field instrumentation. Knowledgeable in SIL, LOPA, HAZOP, and SIL verification calculations. Ability to use software for sizing and selection of in-line and on-line instruments. Proficient in Smart Plant Instrumentation (SPI) and Instrumentation database. Experienced in providing engineering support for procurement activities of field instrumentation and control systems, technical bid evaluation, and purchase orders. Familiarity with creation of Process Control Strategy Documents (PCSD), review of control system architecture drawing, control panel layout, I/O assignment, logic diagrams, motor control schematics, and loop drawings. Knowledgeable in determination of process control loops and selection of control method/strategy for various process applications including tuning methods of PID controllers. Familiar with DCS/SIS/PLC systems platforms such as Emerson Delta-V, Siemens PCS7, Honeywell Experion, and Yokogawa (DCS CS3000/SIS Prosafe-RS). Ability to coordinate with Client, Vendors, work share office, and technical disciplines. Familiar with codes and standards including ISA, IEC, NEC, API, NFPA, etc.

Professional Registration: Registered Professional Engineer (CSE P.E) - Texas Computer Knowledge: INtools/SPI, Auto CAD, Sizing Calculation Software, MS Office, Adobe, Lotus Notes, Bluebeam, HIMA SILworX, SIL Calculation Softwares

Training: Smart Plant Instrumentation (SPI) Training Course Variety of Instrumentation and Control Systems Training Courses Including field instruments sizing and selection, DCS, and SIS

Work Experience:

Control Systems Design Engineer in Fluor, Sugarland, TX – 2012 – 2016 Sasol Lake Charles Chemical Plant, Lake Charles, LA: Prepared DCS and SIS I/O lists for revamp scope in existing area, and new scope. Marked-up interlocks on P&ID, and assisted in development of SIS C&E for interlocks and shut off valves. Performed sizing calculations and selection of inline devices. Developed purchasing requisition packages, reviewed vendor quotations, and performed technical bid evaluations for variety of inline instruments and control valves.

SLM Project, South Louisiana Methanol Plant, Baton Rouge, LA: Prepared estimates and Pre- FEED activities for expansion of existing plant adding Methanol, and CO2 units. Developed the P&IDs, marked-up interlocks, and updated the P&IDs. Prepared preliminary instrument index, and I/O summary. Assisted in development of C&E diagrams for BMS system. 2

Flint Hill Revamping Project, Houston, TX: Developed Instrument Index and prepared estimate for instrumentation, and I/Os list during FEED phase. Communicated with vendors to get budgetary quotation for instrumentation. Developed and customized existing technical specification documents for Analyzer, DCS, Cable/JB, and Packaged Instrumentation per project scope and client requirements. Prepared data sheets for inline instruments. Performed sizing calculations for in-line instruments. Evaluated the existing flow elements with the new process data to verify and ensure the devices meet the new process conditions. Dow R.O Project, Sadara Chemical Plant, Saudi Arabia: Reviewed and marked-up P&IDs with the final vendor data. Performed sizing calculation and selection of control valves and regulators. Developed data sheets for in-line and on-line instruments. Performed quality check and review of datasheets developed by work share office. Coordinated with client, vendor, and engineering disciplines to conduct engineering and procurement activities. Prepared requisitioning packages, and purchase orders requisitions for inline and online instruments. Prepared technical bid evaluation and communicated with vendors to meet project’s technical requirements. Reviewed and commented vendor documents for the purchased instruments and followed up the requisition packages until final stage of P.O. Terrier Project-B1SF, BASF Chemicals Company, Theodor, AL: Developed datasheets and performed procurement activities for field instrumentation during detail engineering for MGDA unit of plant. Performed technical bid evaluation for inline instruments and prepared purchasing packages for procurement. Assisted on review and verification of logic diagrams and interlock sheets for DCS/SIS. Reviewed and commented on HMI graphic pages for Vendor supplied PLC. Performed technical evaluation for weighing system packages. Coordinated with technical disciplines for squad check and instrumentation interface requirements. Reliance Jamnagar Gasification Project, Reliance Industries Limited, India: Assisted in project planning for definition of instruments to be purchased in Client’s frame agreements with Vendors. Different type of inline and online instruments categorized for purchasing in Bid or frame agreement per Client instructions. Developed P&IDs in order to specify field instruments, control loops, and fieldbus representations. Responsible for creating and development of the SPI Instrument Index for the project. Daily activities included development of Index, Instrument datasheets, and Alarm/Setpoint lists in SPI per process design progress. Interlock numbers extracted from control philosophy/C&E documents and populated the information into SPI. Performed interdisciplinary squad check for review of documentation and coordinated with piping and mechanical groups in order to determine the instrumentation interface requirements. Coordinated with work share offices to maintain, populate, and back check SPI activities and instrument data sheets. Responsible for development of procurement packages for variety of inline instruments. Performed calculations for level sketches. Thermowell preliminary calculation and sizing performed. Vendor TW sizing reviewed in order to verify the wake frequency and stress calculations. Instrument Material Requisition Packages, Technical Bid Tabulations, and Purchase Orders issued to Procurement. Coordinated with Vendors for bid clarifications and change notices. Vendor quotations and data reviewed, evaluated, and approved based on the project requirements. Coordinated with Client and Licensor of the project in order to clarify the detail of technical requirements for specific applications. Participated and prepared reports for weekly group meetings to review project progress and activities.

SADARA Petrochemical Project, Saudi Aramco JV Dow, Al-Jubail, Saudi Arabia: Involved in the engineering activities of steam generation unit and analytical measurement systems, revised P&IDs and modified representation of instrumentation on P&IDs based on the design progress and project requirements, reviewed instrument index and instrument datasheets. Assisted in preparation of process control strategy documents including C&E charts, control narratives, alarm/setpoint list, and simplified process interlock diagrams. 3

Nasr Full Field Development Project, Abu Dhabi-U.A.E: Assisted in preparing FEED and detail design estimates. Reviewed, prepared, and developed instrumentation datasheets, instrument index, and MOV datasheets.

Electrical and Instrument Engineer, Trading Corporation of Iran – Technical Branch, Tehran, Iran - 2002 - 2011

Activities included interface with contractors, and vendors. Technical bid evaluation and review of technical documents for "Concrete / Steel Wheat Silos". Reviewed and modified Silo storage automation facility and made recommendations for design improvements. Specified and selected temperature and level measurement instruments for silos. Used INtools (version 6) for design and engineering. Selected electrical equipment, and instrumentation in accordance with the “dust hazardous area”. Reviewed, and checked cable schedule, Instrument Index, I/O list, and MTO for field instruments’ bulk material. Interfaced with automation contractor. Reviewed and commented on Siemens PLC documents including control system configuration, logic diagrams, panel layout, marshaling panel assembly, and loop diagrams. Reviewed, and checked drawings for lighting, electrical facilities, and equipment in silo. Reviewed maintenance contracts for various Silo sites, and checked performed maintenance work. Participated in feasibility study for construction of different sites of wheat silos. Prepared technical and commercial documents for technical bid and selection of contractor. Education: B.Sc., Electrical Engineering - Electronics 2001, Zanjan University, Zanjan, Iran

Personal: U.S Citizen

Contact this candidate