Donald Flack

ac19sn@r.postjobfree.com

***=***-**** Cell

Experience

*-*-** – 6-10-17 Aerotek / TEKNOR APEX – Brownsville, TN – Project Manager

• Managed construction for installation of new production processing equipment inside the existing manufacturing plant.

• Extended existing mezzanine in area to support new equipment and platforms

• Coordinated demolition and installation of concrete, structural, piping, process equipment and electrical contractors.

• Production was scheduled to coordinate with construction related outages in affected areas of plant.

• 7-6-16 – 8-16-16 Day & Zimmermann MillerCoors Shenandoah Brewery – Construction MGR

• Demolished and replaced conveyors, packers and utility piping for (3) existing can packaging lines

• Production was maintained on all three lines with short outages to meet production demands

11-6-15- 6-15-16 Oxford – Anheuser-Busch/10 Barrel Brewery, Bend, OR – Construction Manager

• Manage Design & Construction for Expansion of 10 Barrel Craft Brewery at Bend, OR. Coordinated local design services and construction contractors for new Packaging Building with new packaging lines.

• Coordinated demolition, design and construction of additions and upgrades to existing brewing equipment and piping including installation of a new steam boiler

9-08-14 – 12-12-14 Allstates Consulting Company – Sargent & Lundy Contract Construction Commissioning Manager – CLECO Rodemacher Power Plant

• Managed FERC Regulated Power Plant Demolition, Construction

Commissioning/turnover/documentation for (2) Bag houses and auxiliary systems.

• Commissioning team responsible for Demo of existing equipment as well asv construction walk downs/tests punch lists and Start Up/Turnover for new equipment and piping

7-14-14 – 9-5-14 Oxford – MolyCorp – Process Engineer / Project Engineer

• Worked on a triple effect Sodium Hydroxide evaporator (concentrator). For MolyCorp, Inc. at Mountain Pass California.

• Developed the Demolition and Removal design drawings, verified PFD, P&IDs, and control strategies.

• Specified pumps, piping, and instrumentation. Oversaw the piping design and installation.

2-15-14 – 6-8-14 Process Equipment Management Company - AP Fabricators LLC Contract Construction Manager – Bunge North America

• Managed Demolition and Removal of existing equipment and controls to be replaced

• Managed installation of new grain river Load out Towers, conveyors, piping and controls for two Bunge North America Plants on Mississippi River.

3-15-13 – 9-26-13 Process Equipment Management Company Contract Project Engineer / Edeniq LLC

• Developed process changes to design, construction and estimate for upgrades installation for existing Edeniq Corn Oil Extraction process.

• Made Dismantling and Removal drawings for replaced items.

• Updated P&ID’s and design drawings for installation of upgrades to equipment and piping.

6-10-12 – 2-20-13 Foth Production Solutions LLC Contract Project Manager

• Manage installation of construction upgrades of Miller Coors Brewing in Ft Worth, TX.

• On site Construction Manager responsible for coordination of production with removal of equipment and controls to be replaced and new equipment and piping construction in an operating brewery.

1-2-12 – 5-15-12 – Process Equipment Management Construction Manager / Edeniq LLC

• Construction Manager responsible for installation of Edeniq pilot plant for developing process for converting cellulose feedstock to ethanol

• Managed the creation and update of MS Project Schedule.

• Managed construction/commissioning/start-up of new equipment, piping and controls on time and within budget.

6-15-11 – 12-15-11 STI Services - Roquette America Contract Project Manager

• Project design, material/equipment procurement, demolition and Removal, construction and sub contract management.

• Production additions and upgrades for existing corn process equipment, piping and controls.

1-15-11 – 6-15-11 Jacobs Engineering - ConAgra Foods Contract Construction Manager • Project design for demolition/removal of equipment/material to be replaced.

• Material/equipment procurement and sub contract construction management.

• Production upgrades for existing food process and packaging equipment, piping and controls in ConAgra Frozen Food Plant.

• Replacement and upgrades for existing roofing and equipment required installation and removal of Tuff Wrap sanitary isolation material and supports. • Managed construction and creation/update of MS Project Schedule

2008 – 2008 - Agri Process Innovations Project Manager

• Managed $30MM ethanol plant upgrade from dry milling to wet corn milling.

• Reported weekly progress to design team and plant production team.

• Coordinated engineering design, demolition and removal requirements, equipment and material procurement, contracts, budget, construction and scheduling.

• Designed process piping systems, P&ID’s, instrument list, material and equipment list and construction work packages.

2007 – 2008 Delta-T Corporation Construction

• Daily on Site project management, safety promotion and coordination of subcontractors at this for $170MM ethanol plant.

• Coordinated field change orders and requests for information with contractors and home office. Managed the creation and update of MS Project Schedule

• Responsible for the commissioning, start-up/turnover of utility/process equipment, piping and control systems.

2006 – 2007 Process Systems Inc./ Lurgi Construction Engineer

• Coordinated utility equipment and piping, process/storage tanks construction for $160MM ethanol plant

• Coordinated field change orders and requests for information.

2002 to 2006 - Ford Motor Company Plant Engineer

• Led team through creation of comprehensive strategic noise abatement plan that allowed the elimination of hearing protection in 35% of manufacturing plant

• Managed development of design of demolition and construction plans for upgrades that increased reliability of steam, compressed air and cooling water piping and systems for a 3.5MM sq. ft. facility.

2000 to 2001 - Duratek Plant Engineer

• Managed construction upgrades for existing facility to store and treat radio-active wastes.

• Managed and coordinated of demolition / construction of structural steel, concrete foundations, process piping, ventilation and equipment installation.

1998 to 2000 - Jimmy Dean Foods Plant Engineer/Process Safety Manager/Environmental Manager

• Managed design and construction of projects that increased average production 20%

• Process Safety Manager responsible for HAZWOPER team and training to meet OSHA requirements.

• Arranged HAZWOPER practice with local fire and emergency response personnel and plant personnel.

1995-1998 - Process Systems Inc. / Lurgi Project Engineer

• On site design, demolition, construction and maintenance of WITCO Memphis Chemical Plant equipment, piping and control system upgrades

• Assigned to Arcadian Fertilizer plant to plan and execute a four week construction turn around outage for dismantling and refurbishment of existing equipment and replacement of piping. Onsite Construction Engineer for wet corn mill project that was finished on time and under budget

1993-1995 - Roquette America Inc.

Project/Construction Engineer

• Managed project budget estimates, design, procurement and demolition and construction contracts for plant additions.

• Managed replacement of coal fired boiler traveling grate, steam/condensate return systems piping, boiler water feed system and a new coal handling equipment system

1992-1993 - Quantum Chemical Contract Engineer

• On Site Engineering and Project Management for polyethylene construction upgrades and maintenance.

• Projects included Piping and Equipment demolition/addition construction to Polyethylene process.

1980-1992 - Coors Brewing Company - Project Engineer

• Project Engineer Golden Brewery FERC regulated cogeneration coal fired power plant, waste treatment and refrigeration equipment and piping upgrades design, demolition and construction.

• Coors Shenandoah Brewery Plant Engineer and Utilities Manager during construction and start-up

1973-1980 - EI DuPont- Chemical Manufacturing Plant Engineering Designer

• Designed and managed construction and demolition for additions to existing Hydrogen Peroxide, Hydrogen Cyanide, Sodium Cyanide and Acrylic Sheeting process equipment and piping systems.

• Projects included piping and equipment design, procurement and construction for replacement and additions to chemical processes.

Education

BS Manufacturing Engineering, University Of Memphis, Tennessee.

AS Mechanical Engineering, State Tech Institute Memphis, Tennessee

Contact this candidate