Amrik Dhanju

**** ******* ***, *****-**, Concord, California

Authorized to work in the US for any employer

OBJECTIVE

Associate with an organization and work with wholehearted dedication to contribute my efforts in the fulfillment of organizational goals.

Committed to take up challenge and Growth oriented responsibilities. To build, Motivate and lead a vibrant team.

Help colleagues to attain the Targets & to work as a team for the betterment of self and for the organization.

Take pride in my work and strive for no accidents or injuries and keeping downtime to the barest minimum through careful planning and keeping a close working relationship with fellow.

Proven Ability to operate in a multicultural environment; proven capabilities supervising both expatriates and local workforce, able to ensure completion of targets on time in a safe and cost effective manner.

20 YEAR EXPERIENCE

Most recent:- Dept Maintenance Superintendent / Construction Eng 2015 to 2017

(Bumi Armada Refinery head office Singapore)

2nd most:- Maintenance Supervisor Engineer 2011 to 2015

(SBM / Noble Energy Refinery head office Huston)

3rd Most:- Maintenance Supervisor Engineer / Marine Engineer 1997 to 2010

(FPSO Refinery, Marine ships / Yard)

SKILLs

I have been with more than 20 years experience in Maintenance Supervision & Construction Supervision involved in all phases of Installations and repair working on different types of plants.

In-depth knowledge of repair and maintenance requirements of plant machinery, tools, equipment, and mechanical systems.

Ability to work independently and in a large team of equally skilled individuals

Proficient in a large number of software and applications used for record maintenance, communication, reporting, etc.

Outstanding skills of communication that enable me to enhance the flow of tasks and information across the organization.

Passionate to achieve excellence through constant learning.

Follow the direction of senior management, provides and directs overall supervision to the activities of the assigned craft personnel in the coordinating, planning, scheduling and performance of major repair work in the refinery.

Responsible for maintaining the technical expertise of the skilled trades, monitoring their skill sets and development of training plans. And apply correct management, maintenance and engineering principles to maintain the sustainability and reliability of the integrated systems of people, materials and equipment. So this sustainability and reliability of all of the refinery machinery and systems assures that the refinery can meet business demands.

DETAIL OF WORK EXPERIENCE

FPSO Refinery oil rig Husky Madura (Bumi Armada) 2015 to 02/28/2017

Dept Maintenance Superintendent & Construction Engineer

Supervising a big team in maintenance, construction, commissioning, and operation of machinery’s & Equipment.

Building maintenance crew from day one. Worked daily changing the way that maintenance was being performed and the way safety was being looked at via continuous training in both safety and maintenance.

Managing technical aspects of heavy-duty machinery’s repair and overhaul of machinery and component parts; the principles and practices of labor and materials

Responsible for the day to day supervision, motivation and training of the mechanical personnel within the area of assignment, repairing equipment to a better standard.

Coordinate and participate in the preventive, corrective and troubleshooting maintenance activities of the plant equipment at the assigned location.

Responsible for the productivity of personnel in regards to timeliness in diagnosing and completing necessary maintenance and repairs.

Assist manager in establishing priorities, improvements, & modification proposals, comply with company environmental health and safety policy & promote it awareness of its among staff, working with a maintenance Budget and looking daily and overall expense.

Monitor effectiveness of the current preventive maintenance program to minimize plant breakdowns due to failure of systems and to update inspections and frequencies to best meet the goal of 100% reliability.

Extensive expertise with mechanical systems including refinery machinery’s, equipments and compressed air pneumatics and hydraulics.

Participate in the planning and scheduling of work to be done by plant personnel is responsible for the timely and efficient completion of the work.

Maintaining good labor relations, morale and discipline in group and to initiate corrective actions when required.

Support all other maintenance shops as required including successful completion of daily tasks as well as vacation relief of other maintenance foremen.

Knowledge with the storeroom personnel to ensure maintenance materials inventory is accurate and available.

High skills in production process support, managing personnel follow all GMP and safety policies. Working with accountability groups to accomplish main results.

Commissioning and testing, NDT methods and able to interpret vibration and oil analysis reports. Piping, welding inspection and RT film review, piping / structural fabrication and erections, grit/blasting and paint inspection, hydrostatic test and insulation inspection, Plant Equipment erection and alignment, also to include HVAC and Fire Fighting systems its erection and installation.

Contributed on refinery system with Maintenance main machinery, power generation, centrifuge, waste water treatment plant, Vacuum System, Air Condition/ Ref plant, Main air compressor, Instrument compressor, Fresh water generator, etc, and pressure testing commissioning new and old Systems.

After completion with major overhaul, trail and demonstration of machinery, equipment carried and recorded.

FPSO Refinery oil rig ASENG (SBM / Noble Energy Huston) 2011 to 2015

Maintenance Mechanical Supervisor Engineer

In my tenure I have been working as Maintenance Supervisor Engineer, In-charge managing Maintenance / Operation / commissioning carrying out testing tuning of all newly installed machinery’s, and even overcome with lot many Alteration and Addition before and during production.

Responsible for carrying out maintenance routines, major & minor overhaul on equipment used for refinery, like pumps, centrifuge, vacuum system, waste water treatment system, power generation, hydraulic & pneumatic system, Instrument air compressor, AC compressor, Ref system, Boiler system & steam driven cargo pumps, Piping systems, Mixers, Inlet and Inter stage heaters, Crude oil cooler, HP and LP separators, Electrostatic Coalescer, Crude oil transfer pump. Coarse filter, Fine filter, DE aerator tower, Booster pump, Injection pump, Produced water system, PW surge drains, PW Degasser, Feed gas scrubber, Pre-filter Coalescer, fuel gas compressor, oil separators, fuel gas KO drum, filter Coalescer, Super heaters, Chemical Dosing units, etc.

Develops and implements performance goals, objectives, policies, procedures, and work plans for the assigned Maintenance division.

Analyzes Maintenance department workload for the assigned division; sets priorities, and schedules activities for a complex full day operation.

Maintains a wide variety of computerized and paper records, including any breakdown reports by specific manufacturer and equipment type; fuel, oil, and lubricant consumption; machinery repairs; accumulated machinery and overhaul status.

Analyzes the causes of unscheduled maintenance, implements reduction plans, reviews results, and modifies as needed to attain on-time performance acceptable to the higher authority.

Supervises staff directly, and through subordinate supervisors. Monitors the assignment and completion of projects and jobs, including staff performance.

Authorizes and monitors the training of division maintenance personnel.

Counsels employees on problems affecting work performance. Determines the need for discipline, issues adverse letters, and participates in disciplinary or grievance hearings.

Schedules construction, remodeling, or repair of buildings, equipment, and premises.

Consults with the staff of the Procurement Department and Materials unit to set specifications, and review tool and equipment orders.

Provides cost estimates to the Claims Department, as well as any failure information pertinent to the resolution of claims.

Keep touch with manufacturers in regard to performance requirements, machinery and equipment wear, failure trends, and other issues.

Performs periodic personal inspection tours of all division maintenance facilities,

Shipping company and Shipyards (Executive shipping worldwide) 1997 to 2010

Maintenance Marine Engineer & Operation Engineer

Tenure I have contributed with Maintenance & Operation Supervisor on various machinery’s / Equipment.

Designed projects for new plants and facilitated construction process.

Loyal and dedicated person driven to succeed in any position.

Excellent knowledge of principles and practices of employee supervision, including work planning, assignment and review and the training of staff in work procedures.

Extensive knowledge of policies, procedures, equipment, materials and supplies related to the construction, operation, and maintenance repair of major and minor machinery’s & equipments.

Knowledge of techniques for effectively dealing with a variety of individuals from various socio-economic, cultural and ethnic backgrounds, in person and over the telephone.

Exceptional organizational and time management skills with attention to detail.

Strong principles and practices of supervision in maintenance & operation.

Provided necessary support to manufacturing process, prepared plans to improve efficiency and reduced costs.

Documented electrical specifications and made single line diagrams, and managed interpreted all technical drawings, and performed preventative maintenance on electrical distribution system.

Coordinated with teams and prepared manufacturing location for process.

In-charge of yard team supporting in layout installing Main Machinery, Aux Machinery, Equipment and pressure testing commissioning new and old Systems

Maintenance carrying out major overhaul of Boiler by converting boiler with advanced fitting and automation controls,

Managed installing with high pressure pipe line, new equipments, and machinery essential generators, HVAC Air Condition/ Ref plant, Main air compressor, Instrument compressor, Fresh water generator, and Fire fighting sys. overhaul of steam cargo pump, Ballast pump, Tank cleaning pump, and Inert Gas System.

Responsible for implementation & review of Pre-commissioning and Commissioning procedures, witnessing of all rotating equipment installation/alignments, oil flushing, punch listing and clearing of punch list items, like walking and red lining of P&IDs, temperature and vibration monitoring during load runs, correct internals/externals of all static equipment as per project requirements, provided technical support to vendors for commissioning of various equipment’s. And also responsible for preservation of all rotating and static equipment.

After completion with installing of all machinery, trails and demonstration carried out, Lot of observations concerning design faults and required action were taken.

EDUCATION

Bachelor’s Degree in Mechanical Engineering.

Engineer (COC) certificate of competency from UK, Great Britain.

ADMINISTRATIVE

Diploma in Personnel Management & Industrial Relations.

Leadership Course.

Advanced Management Course.

HUET (T-HUET-5195) OPITO (Helicopter licenses for travelling)

High Voltage safety (HV) :-.

DETAILS OF COURSES AND CERTIFICATES

DETAILS OF COURSES NUMBER

High Voltage safety (HV) :- HVSC/051/0116/02

Advanced / Basic Fire Fighting:- BPMA/AFF-RF/213/2013

Proficiency in Survival Craft / Rescue Boat / PST / PSC:- BMA/PSCRB-RF/386/2013

Elementary / Medical First Aid / Medicare :- 10MAR/3042/0018

Personal Safety & Social Responsibility (PSSR):- PSSR/21050

Safety engineer Officer:- 104/2930/0403

Safety Awareness:- MUM/SA/24107/2067

Energy Conservation:- MUM/ECC/20307/1149

International Safety Management:- MUM/ISM25207/1988

Root Cause Analysis:- MUM/RCA/10907/615

Petroleum Tanker Familiarization:- 021***********

Chem Tanker Familiarization:- MMTI/CTF/41/2002

Gas Tanker Familiarization:-- MMTI/LGTF/20/2002

Tanker Vetting Inspection:- 304

Pract Mar Electerical Workshop:- 8172

Engine Room Simulator:- 000300

Preparatory Course Marine Engineer Officer:- SC-631/2000

Contact this candidate