CURRICULUM VITAE

Name : Mahendra Kumar Naidu

Designation : Lead Engineer/Senior Engineer- Pipeline

Nationality : Indian

Date of Birth : 31st January 1963

Education : B.Sc. (Engg); Mechanical Engg.

Regional Institute of Technology, Jamshedpur,

Ranchi University, Jharkhand, India

Email: ac13l7@r.postjobfree.com

Phone: 009**-*********, UAE

0091 922-***-****, India

0091 946-***-****, India

SUMMARY: 29 years of experience in pipeline FEED, Detailed Engineering, PMC Services for pipeline Detailed Engineering, Engineering Support to Field Engineering & Construction/Commissioning in the field of onshore and offshore Pipeline-Flow lines, High pressure water injection lines, Gas lift lines, Gathering stations, Trunk lines, Export pipelines, Field Facilities, Receiver/Launcher Facilities, Well Head Piping, Cross Country Pipelines.

Experience includes pipelines with RTRP, HDPE lined/Rotolined Pipelines & Fittings, Internal FBE lined pipelines, Cladded, DSS and SDSS piping.

ENGINEER - PIPELINES:

Carrying out FEED, Detailed engineering, Supervising engineering sub-contractor works, cost & man-hour estimation, FEED verification, detailed engineering proposals.

Lead engineer on FEED, Detailed Engineering Projects, PMC Services.

Development of pipeline standards, pipeline design basis, pipeline wall thickness calculations per ASME B31.4/B31.8, validated spread sheets for Road, Railroad crossing calculations per API RP1102, Anchor Load Calculation.

Development of standard drawings for pipeline.

Working knowledge of computer software packages: Auto CAD, MathCAD, Caeser-II, Autopipe.

Conversant with ASME B31.4, B31.8, DNV OS F101, NACE, API, ISO, Shell DEPs, ADCO/ARAMCO/PDO/KOC/GASCO/QP/GOST/SNiP standards.

Onshore & Offshore Pipelines:

Prepare FEED, select essential standards for use, identify design through specifications, technical risks, facility safeguarding, safety and health requirements and infrastructure requirements.

Preparation of pipeline design basis, pipeline engineering deliverables, pipeline engineering specifications.

Conducting desk top study, Pipeline route selection, review of route maps/field layouts, pipeline plan, routing drawings, corridor drawings, station approaches, alignment sheets, GA drawings, pipeline crossing drawings, sectionalizing valve typical drawings etc.

Preparation & review pipeline wall thickness calculation book, road crossing calculations, combined stress, elastic bend radius, upheaval buckling analysis, anchor loads, antibuoyancy calculations, on bottom stability, free spanning and end expansion analysis.

Sectionalizing valve evaluation & spacing reports, grade evaluation reports of line pipes, scrapper evaluation reports, pipeline coating evaluation & coating selection reports.

Preparation of project specification & data sheets for barred tees, isolation joints, induction bends, anchor flanges & other pipeline materials. Preparation of RFQs, technical queries, bid evaluations, vendor drawing approval.

Design & engineering of major river crossings, pipeline stability analysis, rail road crossing, road crossings, thrust boring, horizontal directional drilling, buoyancy control. Review and approval of installation procedures for river crossings, horizontal directional drillings, bored crossings.

P&ID review for system configuration, inter discipline check for function and operatibility of pipeline and piping system.

Review of pipeline hydro test procedure, hydro test diagrams, drying & pre-commissioning & commissioning procedures. Review approval of project specifications for pipeline construction, welding, radiography etc.

Preparation of construction/installation tender documents for onshore & offshore pipelines.

Mott MacDonald Senior Pipeline Engineer

Hamdan Street, Abu Dhabi

Al Gaith Tower

[OCT 2013 to Date]

Lead Engineer-Pipeline,

Al Dabbiya Phase-III Development Project ADCO, Abu Dhabi.

Offshore (Subsea)/Onshore pipelines and facility

Detailed Engineering & Design for Oil Gathering lines, Gas Injection/Gas Lift pipelines, Clusters (24 numbers), Well heads (140 numbers), Water Supply/Injection Pipelines, Water Disposal Pipelines, Oil Export and Gas Export Pipelines.

Pipeline length: 400 kms

Sizes: 3” to 28”

Launcher/Receiver/Manifold facilities/Clusters.

Well Head: 146 nos

Lead Engineer-Pipeline,

Rumaitha/Shanayel Phase-III Development Project ADCO, Abu Dhabi.

Detailed Engineering & Design for Oil Gathering lines, Gas Injection/Gas Lift Pipelines in 1500# & 10,000# class ratings, Water Supply/Injection Pipelines, Water Disposal Pipelines, Oil Export and Gas Export Pipelines including Lean Gas Transport Lines.

Pipeline length: 440 kms

Sizes: 3” to 26”

Well Head Facility: 35 nos.

Launcher/Receiver/Manifold facilities.

Petrofac International Ltd. Principal Pipeline Engineer

Al Khan-Sharjah, UAE

[JAN 2009 – to Oct 2013]

Lead Engineer-Pipeline,

EPC of Expansion of Bab Gas Compression Project (EBGCP) Phase-2 ADCO, Abu Dhabi.

Detailed Engineering & Design for 35 numbers 6” & 8” gas flow lines, Gas Transport Trunk lines- 18” & 20”. Downstream of GC transport pipelines of 16” and sweet gas transport pipelines.

Pipeline length: Flow lines: 180 kms

Trunk lines: 60 kms

Lead Engineer-Pipeline,

Gas Compression & Re-injection Project, SONATRACH, Algeria.

Front End Engineering & Design for Gas lift pipelines, Sales gas and Injection Pipelines in 1500#, 10,000# class. Preliminary pipeline route survey, field receiver/launchers for sales gas and gas transport lines. Gas lift facility design for 16 wells.

Pipeline length: 240 kms

Line sizes: Sales Gas 26”, Gas Transport Lines 16” & 20”, Flow Lines: 6” & 8”.

Lead Engineer-Pipeline,

Effluent water injection phase-1 and sea water injection phase-2, KOC, Kuwait.

Detailed Design & Engineering of high pressure HDPE lined pipelines in 2500# and 1500# class, 167 kms of pipeline including 47 nos of field receiver/launchers, 69 injection well heads, piping plan, 25 kms of 40 bar designed RTRP Pipelines, Fuel Gas, internal FBE coated Recovered Oil lines, high pressure trunk lines, lateral lines, flow lines.

Pipeline length: 193 kms

Line sizes 4”, 6”, 8”, 10”, 12”, 14”, 18”, 20”.

Lead Engineer-Pipeline

LPG Processing Facility, Algeria, SONATRACH

Front End Engineering & Design of Pipelines

Pipeline length: 380 kms of flow lines, branch lines, trunk lines for LPG, Condensate Export pipelines. Line sizes 8”, 12”, 16”, 20”, 24”, 30”.

Gathering Manifolds, Launchers and receiver facilities at various locations. Export pipelines and tie -ins.

TA-Pipeline

14” Pipeline from Ruby field to Bontang LNG Plant (offshore & onshore)

Conceptual Design, Pearl Energy, Indonesia- Pipeline wall thickness calculation, on bottom stability, free spanning and end expansion analysis.

Lead Engineer-Pipeline

West Qurna Field, Iraq

Detailed Engg-Technical Proposal.

Pipeline Length: 450 kms of sea water transportation pipelines, 56”, 52”, 48”, 40”, GAS export pipelines.

Pre FEED & FEED verification report review and detailed technical proposal

Lead Engineer-Pipeline

Fuel Gas, Low Sulphur Fuel Oil, Gas Oil, transportation pipelines from MAA Refinery to Doha, Sabiya, Azzour Power stations. KOC, Kuwait

FEED verification & EPC Proposal

Pipeline length: 1050 kms Part A & B. Pipeline sizes from 52”, 48”, 40”, 36”, 24”, 16”, 12”, 10” pipelines. Thermal Insulation of LSFO pipelines, piggable drips and rip barrels on rich gas pipelines.

Lead Engineer-Pipeline

KOC PS Transportation Pipelines Kuwait

FEED verification & detailed engineering proposal

Pipeline length: 188 kms, 48”, 40”, 24”, 12” trunk lines & export pipelines.

Gathering Manifolds, Launchers and receiver facilities at various locations.

Lead Engineer-Pipeline

46” dia 50 kms Gas Transport Pipeline, ADGAS, Abudhabi, UAE

FEED & EPC proposal

Pipeline length: 46” dia 50 kms of Gas Transportation Pipelines from Offshore tie in to Das Island pig trap.

Technical Authority-Pipeline

1.8 MMBOPD Phase-I Development Bab Thamama-G & Habshan 2, ADCO, ABU DHABI, UAE

FEED verification & EPC proposal

Pipeline length: 707 kms of flow lines, water injection lines, water disposal lines, trunk lines from RDS to CDS. Line sizes, 3”, 4”, 6”, 8”, 14”, 16”, 24”.

Launcher Facilities at 4 RDS & CDS location.

Engineers India limited Manager

New Delhi

[JAN 1994 TO DEC 2008]

225 kms REPLACEMENT OF NGL PIPELINES NETWORK PROJECT, GASCO, ABU DHABI

Review of pipeline design basis, pipe wall thickness calculations reports, pipeline material specification, Material requisitions, Technical Bid Evaluations, Pipeline Drawings and Alignment sheet, Hydrotest diagrams.

LINEAR ALKYL BENZENE PROJECT

QATAR PETROLEUM-QATAR

8” Dia 2X10 kms Benzene & Product Transportation Pipelines.

Review of pipeline design basis, pipe wall thickness calculations reports, pipeline material specification, Pipeline Material requisitions, Technical Bid Evaluations, Pipeline Drawings and Alignment sheet, Crossing drawings.

120 kms

DHABOL PANVEL PIPELINE PROJECT, PHASE-II, Client : GAIL INDIA LTD., INDIA

EPC phase of the project. Review of detailed drawings, material take offs, procurement and construction specifications.

1050 kms MUNDRA DELHI PIPELINE PROJECT,

Client : HINDUSTAN PETROLEUM CORPORATION LTD., INDIA

18”/16”/8” 1050 km long product pipeline, dispatch stations at Mundra & Bahadurgarh, receipt terminals, Pumping stations and intermediate pigging stations.

EPC phase of the project. Review of detailed drawings, material take offs, procurement and construction specifications.

KG BASIN CROSS COUNTRY PIPLINE PROJECT.

Client : GAIL INDIA LTD, INDIA

12” dia 86 kms of pipeline including SV stations, receipt terminal from Eluru to Vijaywada.

12” dia 10 kms of pipeline section from Gudala to Amalapuram

12” dia 5 kms of pipeline from ONGC GGS to Receipt terminal of GAIL.

Hot tapping at various locations and installation of valves.

EPC phase of the project. Review of detailed drawings, material take offs, procurement and construction specifications.

252 kms JAMNAGAR LONI PIPELINE PROJECT

Client : GAIL INDIA LTD, INDIA

16”/12” dia, 252 Kms of pipeline section including intermediate pigging station, pumping stations, SV stations etc.

EPC phase of the project. Review of detailed drawings, material take offs, procurement and construction specifications.

180 kms KANDLA BHATINDA PIPELINE PROJECT.

Client : INDIAN OIL CORPORATION LTD, INDIA

22” dia 180 kms pipeline section, with SV stations, intermediate pumping and pigging stations.

EPC phase of the project. Review of detailed drawings, material take offs, procurement and construction specifications.

HUMPHREYS & GLASGOW Engineer

CONSULTANTS: Mumbai

[OCT 1993 TO DEC 1993]

NIPPON DENRO INSPAT LTD

Client : NIPPON DENRO, INDIA

Detailed engineering co-ordination, Preparation of detailed isometric drawings, MTO & supervision of piping works.

CKG PITHAWAL PVT LTD Senior Engineer

Mumbai

[OCT 1992 TO SEPT 1993]

2x120 MW. WASTE HEAT RECOVERY

POWR PLANT, SIEMENS AG Germany

Preparation of detailed isometric drawings, MTO & supervision of piping works.

PUNJ LLOYD LTD

17-18 Nehru Place Senior Engineer-Pipeline Projects

New Delhi 19

[MAY 1989 TO SEPT 1992]

Preparation of pipeline material specifications, Material requisitions, Technical Bid Evaluations, Placement of orders, Detailed crossings drawings, Tie in Drawings, Hydrotest plans, construction method statements.

Thal Salav pipeline project of GAIL

16” dia 30 kms pipeline section with hook up at existing pipeline.

Nagaon to Jagiraod pipeline project of Oil India Ltd.

90 kms, 22” dia pipeline section

8” Dia x90 kms Ode Ahmedabad Pipeline for ONGC

12” diax60 kms Pipeline Section from Jambusar To Vadodara for ONGC

SUPERPACK Trainee Engineer

A DIV OF BAJAJ STEEL INDST

Nagpur

[Oct 1988 to April1989] Worked in loom section of HDPE Plant

Contact this candidate