Quality Control Inspector

Arthur L. Dees

P O BOX ***

DELCAMBRE, LA *****

PRIMARY CELL # 337-***-****

SECONDARY CELL # 337-***-****

Experience

AUGUST 2012 TO AUGUST 2016 REAGAN POWER & COMPRESSION SERVICES, LLC

ASME Q. C. MANAGER

Q.C. INSPECTOR ON FABRICATION OF HIGH PREASURE VESSELS IN ASME CODED SHOP AS PER ASME SECTION VIII & IV SPECIFICATIONS. STRUCTURAL SKIDS AS PER D1.1 SPECIFICATIONS. PROCESS PIPING AS PER B31.3 SPECIFICATIONS.

PERFORM VISUAL INSPECTION OF WELDS ON HIGH PREASURE VESSELS IN ASME CODED SHOP, & STRUCTURAL SKIDS.

COORDINATE, & DOCUMENT N.D.E. (RT), (PT), (MT), (HT), (UT) & STRESS RELIEF ON CARBON, & ALLOY PIPING AS PER CUSTOMER SPECS. ALSO ON ASME CODED VESSELS, & STRUCTURAL SKIDS.

MAINTAIN, & DOCUMENT MTR RECORDS ON HIGH PREASURE VESSELS, & STRUCTURAL SKIDS, AS WELL AS ON ALLOY & CARBON PIPING USED IN FABRICATION OF PROCESS PIPING LINES.

REVIEW, & VERIFY WELDER QUALIFACATIONS ON PROCEDURES USED TO WELD ON PROCESS PIPING & ASME PREASURE VESSELS & STRUCTURAL SKIDS.

REVIEW ASME VESSEL CALCULATIONS & DRAWINGS. CORDINATE HYDRO TESTING ON ASME VESSELS, & AUTHORIZED INSPECTORS VISITS.

FILL OUT & DOCUMENT DATA REPORTS ON ASME VESSELS. AS WELL ASSIGN & DOCUMENT NATIONAL BOARD NUMBERS ON ALL ASME VESSELS.

CREATE WELD MAP ON PROCESS PIPING, & STRUCTURAL SKIDS. WITH WELD NUMBERS, & WELDER STENCILS.

FEBURARY 2011 TO AUGUST 2012 AMERICAN WARRIOR INC.

PIPE FITTER CLASS 1

FABRICATION & INSTALLATION OF PROCESS PIPING ON OIL & GAS COMPRESSOR SKID PACKAGES AS PER CUSTOMER SPECS & B31.3 CODE.

AUGUST 2009 TO FEBURARY 2011 PROGRESSIVE TECH SER

SENIOR INSPECTOR

PROVIDE ON SITE MANAGEMENT, AND INSPECTION OF BLASTING PAINTING, & CONSTRUCTION CREWS ON OFFSHORE OIL AND GAS PLATFORMS.

COORDINATE DELEVERIES OF PAINT SUPPLIES, AND EQUIPMENT FOR BLASTING PAINTING, AND CONSTRUCTION CREWS.

MONITOR BLASTING, AND PAINTING CREWS FOR SAFETY REQUIREMENTS.

LOG, AND SEND DAILY PROGRESS REPORTS, AND COSTS TO CLIENTS, AND PROJECT CONSULTING ENGINEERS

JULY 2007 TO AUGUST 2009 VALERUS COMPRESSION SERVICES LP, LLC

Q. C. INSPECTOR

Q.C. INSPECTOR ON FABRICATION OF HIGH PREASURE VESSELS IN ASME CODED SHOP.

PERFORM VISUAL INSPECTION OF WELDS ON HIGH PREASURE VESSELS IN ASME CODED SHOP.

COORDINATE, & DOCUMENT N.D.E. (RT), (PT), & STRESS RELIEF ON CARBON, & ALLOY PIPING AS PER CUSTOMER SPECS.

MAINTAIN, & DOCUMENT MTR RECORDS ON HIGH PREASURE VESSELS AS WELL AS ON ALLOY & CARBON PIPING USED IN FABRICATION OF PROCESS PIPING LINES.

REVIEW, & VERIFY WELDER QUALIFACATIONS ON PROCEDURES USED TO WELD ON PROCESS PIPING & PREASURE VESSELS AS PER CUSTOMER SPECS.

JULY 2004 TO JULY 2007 PROGRESSIVE TECH SER

SENIOR INSPECTOR

PROVIDE ON SITE MANAGEMENT, AND INSPECTION OF BLASTING PAINTING, & CONSTRUCTION CREWS ON OFFSHORE OIL AND GAS PLATFORMS.

COORDINATE DELEVERIES OF PAINT SUPPLIES, AND EQUIPMENT FOR BLASTING PAINTING, AND CONSTRUCTION CREWS.

MONITOR BLASTING, AND PAINTING CREWS FOR SAFETY REQUIREMENTS.

LOG, AND SEND DAILY PROGRESS REPORTS, AND COSTS TO CLIENTS, AND PROJECT CONSULTING ENGINEERS.

SEPT 2003 TO JULY 2004 DYNAMIC IND

Q. C. INSPECTOR

Q.C. INSPECTOR ON PROCESS PIPING FOR NEW FABRICATION OF PRODUCTION PLATFORMS IN YARD.

PERFORM VISUAL INSPECTION OF WELDS ON PLATFORMS, & MODULES IN YARD.

COORDINATE, & DOCUMENT N.D.E. (RT), (PT), & STRESS RELIEF ON CARBON, & ALLOY PIPING AS PER CUSTOMER SPECS.

MAINTAIN, & DOCUMENT MTR RECORDS ON ALLOY & CARBON PIPING USED IN FABRICATION OF PROCESS PIPING LINES.

REVIEW, & VERIFY WELDER QUALIFACATIONS ON PROCEDURES USED TO WELD ON PROCESS PIPING AS PER CUSTOMER SPECS.

AUG 2003 TO SEPT 2003 CINCO FAB

FITTER CLASS 1

LAYOUT, CUT, AND FABRICATE STRUCTURAL COMPONENTS FOR BLOW OUT PREVENTION PACKAGES.

JUNE 2003 TO AUG 2003 PROGRESSIVE TECH SER

COATING INSPECTOR

PROVIDE ON SITE MANAGEMENT, AND INSPECTION OF BLASTING, AND PAINTING, CREWS ON OFFSHORE OIL AND GAS PLATFORMS.

COORDINATE DELEVERIES OF PAINT SUPPLIES, AND EQUIPMENT FOR BLASTING, AND PAINTING CREWS.

MONITOR BLASTING, AND PAINTING CREWS FOR SAFETY REQUIREMENTS.

LOG, AND SEND DAILY PROGRESS REPORTS, AND COSTS TO CLIENTS, AND PROJECT CONSULTING ENGINEERS.

JUNE 2002 TO JUNE 2003 OMEGA/NATCHIQ

FITTER CLASS 1

LAYOUT, CUT, AND FABRICATE MUD MATT PACKAGES FOR B.P. PIPELINE AS PER SPECS.

MAY 2002 TO JUNE 2002 I.S.I./MOODEY

PIPELINE INSPECTOR

MONITOR, AND DOCUMENT AS LAYED 12” PIPELINE, AND MUD MATT PLACEMENT FOR PROPER LOCATION AS PER CUSTOMER SPECS. WITH R.O.V. CREW ONBOARD M/V CAPE SCOTT.

SEPT 2001 TO APRIL 2002 CHART COASTAL FAB

Q.A./Q.C. INSPECTOR

Q.C. INSPECTION ON CRYROGENIC BOXES.

PERFORM VISUAL INSPECTION OF WELDS.

MAINTAIN MATERIAL TRACEABILITY RECORDS ON BOXES.

COORDINATE N.D.E. (RT) ON ALLOY PIPING IN BOXES AS PER CUSTOMER SPECS.

Q.C. INSPECTION ON BABCOCK CATALIST REACTORS.

MAINTAIN MATERIAL TRACEABILITY RECORDS ON REACTORS.

COORDINATE N.D.E. (MT) ON REACTORS AS PER CUSTOMER SPECS.

JUNE 2001 TO SEPT 2001 PROGRESSIVE TECH SER

COATING INSPECTOR

PROVIDE ON SITE MANAGEMENT, AND INSPECTION OF BLASTING, AND PAINTING, CREWS ON OFFSHORE OIL AND GAS PLATFORMS.

COORDINATE DELEVERIES OF PAINT SUPPLIES, AND EQUIPMENT FOR BLASTING, AND PAINTING CREWS.

MONITOR BLASTING, AND PAINTING CREWS FOR SAFETY REQUIREMENTS.

LOG, AND SEND DAILY PROGRESS REPORTS, AND COSTS TO CLIENTS, AND PROJECT CONSULTING ENGINEERS.

APRIL 2001 TO JUNE 2001 O.B.I

Q.A./Q.C. INSPECTOR

Q.C. INSPECTOR ON PROJECTS IN YARD.

PERFORM VISUAL INSPECTION. MAINTAIN MATERIAL, AND TRACEABILITY RECORDS.

MONITOR BLASTING, AND PAINTING OF PROJECTS IN YARD.

COORDINATE N.D.E. (U.T.) AS PER CUSTOMER SPECS.

FEB 2001 TO APRIL 2001 C.B.S. TECHNIP

CONSTRUCTION INSPECTOR

PROVIDE ON SITE MANAGEMENT, AND INSPECTION OF CONSTRUCTION, AND MODIFICATION ON OFFSHORE OIL AND GAS PLATFORMS.

LOG, AND SEND DAILY PROGRESS REPORTS, AND COSTS TO CLIENTS, AND PROJECT CONSULTING ENGINEERS.

MONITOR CREWS FOR SAFETY REQUIREMENTS.

ASSESS DAMAGES TO OTHER OIL AND GAS PLATFORMS FOR FUTURE REPAIRES TO BE MADE AS PER CUSTOMER REQUIREMENTS.

MAY 2OOO TO FEB 2001 DURHAMS INSP

FIBER OPTIC INSPECTOR

PROVIDE ON SITE VERIFICATION, AND INSTALLATION OF FIBER OPTIC INNER DUCTS.

LOG, AND SEND DAILY REPORTS, (BORE LOGS, BORE PROFILES, TIE INLOGS, PLOW LOGS, HAND HOLE LOGS,) UTILITIES, AND GAS LINE CROSSINGS, TO CLIENTS, AND PROJECT ENGINEERS.

RED LINE AS BUILTS.

MONITOR CREWS FOR SAFETY REQUIREMENTS.

SEPT 1999 TO JAN 2000 PROGRESSIVE TECH SER

CONSTRUCTION INSPECTOR

PROVIDE ON SITE VERIFICATION OF SITE CLEARANCES.

LOG, AND SEND DAILY PROGRESS REPORTS, AND COSTS TO CLIENTS, AND PROJECT CONSULTING ENGINEERS.

MAY 1999 TO AUG 1999 WHITE WING INSP SER

PIPELINE INSPECTOR

INSPECT, AND MONITOR LOAD OUT OF COATED PIPING MATERIAL.

PROVIDE ON SITE INSPECTION OF OFFSHORE PIPELINE BEING INSTALLED.

LOG, AND SEND DAILY PROGRESS REPORTS, AND COST TO CLIENTS, AND PROJECT CONSULTING ENGINEERS.

NOV 1998 TO MAY 1999 PROJECT CONSULTANT SER

CONSTRUCTION INSPECTOR

PROVIDE ON SITE MANAGEMENT, AND INSPECTION OF CONSTRUCTION, MODIFICATION, AND INSTALLATION ON OFFSHORE OIL AND GAS PLATFORMS.

MONITORED QA/QC ON PIPING FOR CLIENTS ACCORDING TO CODES (B31.3, API 1104, & D 1.1).

LOG, AND SEND DAILY PROGRESS REPORTS, AND COSTS TO CLIENTS, AND PROJECT CONSULTING ENGINEERS.

FEB 1998 TO SEPT 1998 C-SPECT

PROJECT COORDINATOR

COORDINATOR ON REFURBISHMENT OF GAS FACILITIES FOR SENECA RESOURCES, INC.

INSPECTION ON FABRICATION AND INSTALLATION OF PROCESS PIPING ON OFFSHORE OIL AND GAS PLATFORM.

INSPECTION OF PAINTING PROCESS ON OFFSHORE OIL AND GAS PLATFORMS

REFURBISHMENT OF GENERATOR, MANIFOLD SKID, METER SKID, AND VESSELS.

SOLICIT BIDS FROM VARIOUS CONTRACTORS FOR REFURBISHMENT ON DIFFERENT PHASES OF THE FACILITIES.

LOG, AND SEND DAILY PROGRESS REPORTS, AND COSTS TO CLIENTS, AND PROJECT CONSULTING ENGINEERES.

COORDINATE DELIVERIES OF EQUIPMENT, AND VENDERS FOR REFURBISHMENT OF FACILITIES.

OCT 1997 TO JAN 1998 C.B.S. SERVICES INC

CONSTRUCTION INSPECTOR

PROVIDE ON-SITE MANAGEMENT, AND INSPECTION OF CONSTRUCTION, MODIFICATION, AND INSTALLATION ON OFFSHORE OIL AND GAS PLATFORMS.

MONITORED QA/QC ON PROCESS PIPING FOR CLIENTS ACCORDING TO CODES (B31-3, API 1104, & D1-1) FOR SAMEDAN OIL AND GAS INC.

MAY 1997 TO OCT 1997 LOWE/OFFSHORE INC

CONSTRUCTION COORDINATOR

PROVIDE ON-SITE MANAGEMENT, AND INSPECTION OF CONSTRUCTION PROJECTS FOR OFFSHORE OIL AND GAS PLATFORMS INVOLVING THE FABRICATION, INSTALLATION, MODIFICATIONS, AND PAINTING OF PRODUCTION PLATFORMS.

COORDINATED, INSPECTED, AND MONITORED QA/QC ON CONSTRUCTION PROJECTS FOR CLIENTS INCLUDING POGO PRODUCING CO.

PROVIDE ONSIGHT VERIFICATION OF SITE CLEARANCES.

JAN 1996 TO MAY 1997 NATCO INC

PIPE FITTER CLASS 1

FABRICATION OF VESSELS, PROCESS PIPING, & STRUCTURAL SKIDS ACCORDING TO CODES (B31-3, & D1-1).

OCT 1994 TO DEC 1995 ULTRA FAB INC

QA/QC INSPECTOR

MONITOR, AND INSPECT FABRICATION, AND WELDING OF STRUCTURAL, AND PROCESS PIPING ACCORDING TO (B31-3, & D1-1) CODES AS PER CUTOMER SPECS.

Q.C. INSPECTOR ON PROJECTS IN YARD.

PERFORM VISUAL INSPECTION. MAINTAIN MATERIAL, AND TRACEABILITY RECORDS.

MONITOR BLASTING, AND PAINTING OF PROJECTS IN YARD.

COORDINATE N.D.E. (UT, RT, & MT) AS PER CUSTOMER SPECS.

APRIL 1994 TO OCT 1994 ALLEN TANK INC

FITTER/WELDER

FABRICATION & WELDING OF VESSELS, & STRUCTURAL SKIDS AS PER CUSTOMER SPECS.

JAN 1991 TO APRIL 1994 MCDERMOTT INC

QA INSPECTOR (CAWI)

SHELL (TLP) PROJECT INSPECTION ON PROCESS PIPING. PERFORM VISUAL INSPECTION. MAINTAIN MATERIAL, AND N.D.E. (UT, RT, & MT) TRACEABILITY RECORDS. MONITOR, AND VERIFY THAT WORK IS IN ACCORDANCE WITH APPROVED PROCEDURES, SPECIFICATIONS, AND CODES (B31-3, & D1-1).

MOBIL/OSO/BOUYGUES PROJECTS INSPECTION ON DECKS, JACKETS, BOATLANDINGS, AND PROCESS PIPING. COVERED PAINT INSPECTION ON PROJECTS. MAINTAIN MATERIAL, AND N.D.E. (UT, RT, & MT) TRACEABILITY RECORDS. MONITOR, AND VERIFY WORK IS IN ACCORDANCE WITH APPROVED PROCEDURES, SPECIFICATIONS, AND CODES (B31-3, & D1-1)

KERR MCGEE PROJECT PERFORM, VISUAL INSPECTION ON DECK, AND JACKET. MAINTAIN MATERIAL, AND TRACEABILITY RECORDS AS PER CUSTOMER SPECS.

APRIL 1989 TO DEC 1990 MCDERMOTT INC

FITTER CLASS 1

LAYOUT, CUT, AND FABRICATION OF JACKETS, AND DECKS.

SEPT 1988 TO APRIL 1989 ALLEN TANK INC

HEAD LAYOUT MAN

LAY OUT OF HIGH PREASSURE VESSALS FOR CUTTING, & FABRICATION. CONDUCT MATERIAL TRACEABILITY, & PT TESTING.

DEC 1984 T0 SEPT 1988 CONTINENTAL ELECTRONICS

PRECISSION SHEETMETAL MECH.

BREAKDOWN OF BLUPRINTS FOR SHEET METAL LAYOUT.

OPERATE C.N.C. (PUNCH, SHEAR, AND BREAK) ALSO OPERATE MANUAL WEIDEMEN, AND KNOWLEDGE OF PRECISION TOOLS.

JUNE 1980 TO DEC 1980 DRECO

FITTER CLASS 1

LAYOUT, CUT, AND FABRICATION OF DERRICKS, AND STRUCTURAL SKIDS.

APRIL 1978 TO APRIL 1980 RED FOX COMPANIES

FITTER CLASS 1

LAYOUT, CUT, AND FABRICATION OF SEWAGE TREATMENT PLANTS. OIL AND GAS PLATFORMS. PROCESS PIPING, PACKAGES, AND LIVING QUARTERS.

APRIL 1977 TO APRIL 1978 PARR INDUSTRIES

FITTER (APPRENTACE)

LAYOUT, CUT, AND FABRICATION OF POSTED DECK BARGES. OIL AND GAS PLATFORMS. PROCESS PIPING, PACKAGES, AND LIVING QUARTERS.

EDUCATION

NEW IBERIA SENIOR HIGH

NEW IBERIA, LA (GED 1984)

TRAINING

NEW IBERIA TECHE AREA VOCATIONAL TECH SCHOOL

WELDING I, II, AND BLUEPRINT READING (NOV. 1982 TO NOV. 1984)

COMPLETED COURSE FOR CWI

RECEIVED CAWI CERTIFICATE (#90121044)

COMPLETED COURSE FOR FIRST RESPONDER

STATE OF LOUISIANA

REFERENCES

AVAILABLE UPON REQUEST

Contact this candidate