Resume

Manthan Bhadja

+91-990*******

ac0vnw@r.postjobfree.com

AREAS OF EXPERTISE

An Engineer and Sr.Electrical Technician with over 3 Years of Commissioning and 9 Years of Operation and Maintenance Total 12 years of proven success in Operations & Maintenance, Installation, Commissioning and Testing in the field of Oil & Gas, Refinery, Well head platforms, Process platform and Power plant. Offshore & Onshore in domestic & overseas organizations.

SAFETY AT WORK

Aware of permit to work and Electrical isolation Requirement. Ensure compliance at all time with permit to work procedure, safety toolbox talk,electrical safety procedure, Environmental, Health & Safety Procedures, as well as occupational health and safety regulations and working in a hazardous area. Aware of area classification, marking for hazardous area and EX Equipment & Gas test Requirement. Observe unsafe condition, accidents, near misses and correctly report to responsible person.

Academic Details:

DEE(ELECTRICAL) : Pass 71% ( 2010)

ITI (Electrical) : National Council Vocational Training. (69%) (2003-2005).With Government Second Class License.

Synopsis of experience.

CAIRN IND LTD. Mead Stream Viramgam as a Electrical Technician (Operation and Maintenance) from-Sep.2016 to Till Date.

ZAKUM DEVELOPMENT COMPANY (ZADCO) Abu dhabi as a Electrical Technician (Operation and Maintenance) from-Jun.2014 to July.2016.(on off rotation)

CAIRN IND. LTD up stream (oil & gas) plant in Rajasthan India. Through SACH EMPL. AS an Electrical Engineer. ( Operation & Maintenance) from-Nov.2011 to May.2014

NATIONAL PETROLEUM CONTRACTION COMPANY Abu Dhabi. As an Sr. Electrical Technician ( Commissioning) from Oct.2009 to Sep.2011

RELIANCE REFINERY LTD. Jamnagar, India. Through SS Electrical As Electrical Technician (Maintenance) from- Aug.2005 to Sep.2009

Zakum Development Company (ZADCO) AbuDhabi.

I Worked with Zakum Development company (ZADCO) Abudhabi Process Platform & UZ750 South. North and Central Island as a Electrical Technician From- Jun.2014 to July.2016 and invold in Commissioning,Start up and Maintenance Activity on Offshore Project.

Investigates and troubleshoots of maintenance problems. Diagnosing problems and takes appropriate action including devising and implementing solutions.

Responsible for preparation, testing, maintenance, inspection, troubleshooting, And rectification of electrical power system and Electrical equipment in Hazardous and Non Hazardous area.

Commissioning, Testing and Maintenance (CM, PM, RM) of Electrical system like HV & LV electrical panels, transformer, emergency and normal lighting, navigation lighting, battery bank, solar system, fog horn system, etc.

Responsible for daily routine operational checks for all Electrical Equipment's with record the parameters in the daily routine checklist.

Maintenance and Troubleshooting of low voltage high voltage and medium voltage like 230V,415V, 690V, 6.6KV and 11KV Feeders, EX Motors

Maintenance and Inspection of EX Lighting system and EX Portable Electrical Equipment.

Ensure that the Ex & IP Rating of every electrical item on the facility is maintained, so that its Integrity is not compromised.

Maintenance of 230V UPS, 110V Station Charger and Battery Bank.

Primary injection of CT, Relay testing with secondary injection, Polarity checking of CT Ratio check.

responsibility for Isolation & De Isolation for low Voltage. And Medium and High voltage system up to 33 Kv with switching program.

Familiar with Personal Protective Equipment & Tools such as hard hat; Safety shoes; Insulated hand gloves voltage / current detector (Multi Magger).

Cairn India Ltd. up Stream (Oil & Gas Plant) in INDIA.

Previous I worked with Cairn Ind. Mangala Processing Terminal Through SACH EMPL in Barmar Rajasthan As Electrical Engineer From Nov.2011 to May.2014 in Oil & Gas Production / Processing Terminal on 45/15 days ON/OFF rotation cycle.

The terminal is now handling 190000 BOPD with 60 MW captive power plant, 220 KV Power Gride and 18 Mangala & 9 Aishwariya wellpads with one water well site.

ACCOUNTABILITIES:

Carried out All maintenance work as per SAP PM Planning system.

Investigates and troubleshoots of maintenance problems. Diagnosing problems and takes appropriate action including devising and implementing solutions.

Preparation of shutdown job planning, spares & manpower planning, job execution as per the shut down schedule.

Involved the operation and Maintenance Activity of E-House 33 GIS panel make ABB,out door 33 KV VCB RMU panel make Scineder and 415V Intelligent PMCC Panel make ABB.

Involved the operation and Maintenance Activity of power generation 11KV*60MW STG (Make Travani) and 6.6 KV * 6.6 MW EDG, HV & LV Drives and its Panel like LAPT Panels,Turbine Control Panel,Synchronised Panel and Relay Panel.

Operation and Maintenance of 150 TPH Boiler (Make Thermex) and its MOV, HT & LT Drives.

Operation and Maintenance of Power and Distribution Transformer up to 20 MVA. HT & LT Panel like 33KV,11KV and 6.6KV Panel make ABB and L&T.

Operation and Maintenance of Air circuit Breaker, Vacuum circuit Breaker and SF6.

Knowledge of Voltage protection relay, feeder protection relay and Transformer protection relay.

Maintenance and Troubleshooting of high voltage and medium voltage like 415V, 690V, 6.9KV and 11KV EX Motor up to 4.5 MW. Make ABB, Simence & Lohar.

Maintenance of Variable Speed Drives (Toshiba, Baker Hughes, Siemens).

Testing and Maintenance of All the EX and NON EX HV & LV PUMP Motor.

Maintenance of 230V Electrical Heat Tracing Panel and System with Self-regulating RTD Control.

Maintenance of 230V UPS, 110V Station Charger and Battery Bank.

Maintenance and Inspection of EX Lighting system and EX Portable Electrical Equipment.

Ensure that the Ex & IP Rating of every electrical item on the facility is maintained, so that its Integrity is not compromised.

Provide Technical support to operation personnel for planned and corrective maintenance of electrical system & equipment.

Participate and provide working knowledge within PTW system including LOTO system.

Manage and motivate a team of Technician to maintain the highest safety performance while keeping them focused on the task at hand.

Ensured During all activity must comply with Electrical Safety Rules and Company Safe work Policy.

Good understanding and reading Electrical drawing, with excellent skills for Troubleshooting.

National Petroleum Contraction Company. Abu Dhabi.

Previous I Worked with NPCC AbuDhabi as a Sr. Electrical Technician Commissioning From- Oct.2009 to Sept.2011 and I Was completed ADMA GPF Oil and Gas processing platform in Zakum Offshore Field.

Commissioning and Testing Activity:

Following commissioning and Testing activities were carried out in Onshore and Start up activities carried out in offshore during project stage.

Testing and commissioning of all Electrical equipment from 415 volts to 33 kV.

Indoor and outdoor substation and substation equipment’s with all type of Instrumentation Transformers, Power Transformers, circuit Breakers, etc.

High Voltage Testing for Power Cables, Bus bars and Bus ducts.

Testing and commissioning of LT panels like PMCC,MCC, E-PCC,N-PCC,M-PDB panels Scheme checking, Interlock checking and Auto Changeover Checking.

Testing and commissioning of (Flam proof & Non Flam proof ) HT & LT Motors and MOVS.

Testing and Commissioning of ABB make 11 KV, 6.6 KV Switch boards and L&T make 415V switch boards.

Testing and Commissioning of HT, LT power and distribution Transformers and its auxiliary protection of WTI, OTI, Buchholz Magnetic oil gage and Pressure Relief valve. Magnetic balance check of transformer.

Commissioning and maintenance of VFDs, Soft starters and Battery chargers.

Knowledge of protection relays of Siemens, ABB and Alstom etc.

Knowledge of Generator Protection, Transformer protection, Differential Protection & REF Protection, HT & LT Motor protection, and synchronizing scheme.

Primary injection of CT, Relay testing with secondary injection, Polarity checking of CT Ratio check.

Simulation check of HT and LT feeder.

Co ordination with production peoples for following up normal startup and shutdown procedures in a continuous process industry.

Training Attended:

CEP (Competent Electrical Person) Conducted By Cairn India Ltd.

ESR & ESP (Electrical Safety Rules & Prosier) Conducted by ZADCO.

AA & PA (Authorized Applicant & Permit Acceptor) Conducted by ZADCO & Cairn.

H2S & SCABA Training Conducted by ZADCO.

PIP (Pride in Production) Conducted by ZADCO.

Fire Fighting Training Conducted by ZADCO.

First Aid Training conducted by ZADCO & Cairn Ind.Ltd.

Working At Height, Poor Lighting, Heat Stress, and Confined Space Entry Conduct

By ZADCO.

Sea servile and helicopter training in Abu Dhabi Conduct By ZADCO.

Emergency rescue training Conduct by ZADCO.

Over head crane, monorail cairn working principle training Conduct By Zadco.

IMST ( International Minimum Safety Training) Conduct By-Cairn Ind.

Personal Information:

Name: Manthan Bhadja

Father’s Name : BhanjiBhai

Date of Birth : 25/02/1986

Nationality : Indian

Sex : Male

Passport No : G6126027

Languages Known : English, Hindi and Guajarati

Permanent Address : Khadpipli,

Ta: Mendarada,Dist:Junagadh

Mobile : +91-990*******

Mail ID : ac0vnw@r.postjobfree.com

Contact this candidate