CAREER OBJECTIVE:

To pursuit a highly challenging career in the Engineering Industry, where I can contribute effectively to the organizational goals there by concurrently acquire new technical skills, with focus on analysis and troubleshooting of problems, by making use of my technical knowledge to the organization’s growth and strength.

EDUCATIONAL & TECHNICAL SKILLS:

Diploma in Electrical and Electronics Engineering

Welding inspector CSWIP 3.1

Certified LEAD AUDITOR by DNV for ISO 9001 (IRCA Approved).

Visual Testing - ASNT / SNT / TC-1A (LEVEL-2).

Magnetic Particle Testing – ASNT / SNT / TC-1A (LEVEL-2).

Penetrant Testing – ASNT / SNT / TC-1A (LEVEL-2).

Radiographic Film Interpretation – ASNT / SNT / TC-1A (LEVEL-2).

Certificate course as a CMM inspector (Co-ordinate measuring machine) by FARO Singapore.

Geometric Dimensioning & Tolerance (GD&T)

Industrial Fire-Fighting (Sakra Emergency)

CNC Programming And Maintenance

PROFESSIONAL EXPERIENCE – I

DESIGNATION: QA/QC INSPECTOR

FAETH GROUP SINGAPORE Mar’ 2016 TO Till Date

Quality

Chemical pipeline installation supervising & monitoring.

Pipe line walk with customer & client. Clear the punch list

As per P&ID drawing line installation & construction fix the equipment are correct location.

Review and prepare ITP, to co-ordinate the NDT inspection team and review of NDT test reports. For all kind of materials and fasteners and secondary process (Coating/NDT/Third Party) as per requirement,

Perform pneumatic test & hydro test.

SS pipe welding witness, perform the pneumatic & moisture, helium test, particle counting testing.

Perform the receiving inspection, review the mill certificate. Verify the heat numbers

Prepare the test pack, weld map & post-test & per test report.

To perform conditional, dimension check and other required inspection to all incoming material to ensure incoming materials are in accordance to company purchase specification unless a Certificate of Conformance (COC) from the supplier is obtained at project site.

To prepare, collect, review, manage and maintain all the project quality documentations which are required by client for final acceptance and buy off of the system, equipment or finished good.

To support customers on the quality related activities, liaise with suppliers, sub-contractors and internal department heads on quality issues throughout the project implementation.

To assist superior / coordinate with sub-contractors for onsite rectification works in relation to quality issues when required.

Prepare the test pack and review the test pack.

PROFESSIONAL EXPERIENCE – I

DESIGNATION: QA/QC TECHNICIAN II

Quality

Quality Assurance and inspection of Well heads, Risers, H4 Connector, Telescopic joint, Diverter, KT ring, Casing head, Casing spool, Drilling adapter, Permanent guide base, URT, Casing Hanger Running tool, Wellhead HSG Running Tool, PADPRT, Cam Actuated Running Tool, Tubing hanger, offshore Skids etc.

Inspection and Commissioning include customer owned offshore drilling equipment (Riser and Diverter) at vendor or customer site.

Generate manual and electronic inspection reports at working in shop and outdoor environment.

Monitoring repair works at vendor side (Welding, Hydro Testing and Final shipment).

Travelling to customer site (onshore & offshore) place do witness for Hydro test and Assembly customer own equipment’s.

Generate GLOBAL REJECTION REPORTS (GRR) & NCR when quality issue is found (Vendor and In-house).

Review and prepare ITP, to co-ordinate the NDT inspection team and review of NDT test reports. For all kind of materials and fasteners and secondary process (Coating/NDT/Third Party) as per requirement,

Liaise with the QC department for all the projects at the different stages of the fabrication so as to ensure the quality in production comply with Standards as per the Customer requirement,

Liaise with Sub-Contractors (Machining, Material Testing Lab, and NDT, Coating applications) for the finishing of accessories structures for each & every projects,

Prepare the production weekly reports & report to the Operational managers based on production activities,

Liaise with the Fabrication, Machining Departments for completing all the welding, machining components within the estimated time for the each & every projects,

Co-ordinate field activities with design changes and internal scheduling,

Perform detail work scope, planning, scheduling, sub-contracting and inventory and materials control,

GE OIL & GAS, SINGAPORE. Oct’2011 TO Mar’ 2016

PROFESSIONAL EXPERIENCE – II

DESIGNATION: QUALITY INSPECTOR

QUALITY

Oil and Gas drilling equipment Inspection,

Repair and Manufacturing/Remanufacturing such as, Riser and Telescopic Joint and Blow-Out Preventers (BOP), Riser Handling Tools, Etc,,

Coordinate with Third Party Inspector and Customer Inspector

Visual and Dimensional Inspection

Hardness Testing

Identification and Stamping

Review Drawing and Specification

Final Inspection in Machined Product

Inspect the Vendor and Commercial Products

Carry-out Visual Inspection and Dimensional Inspection

Follow the API Specification

Review of quality assurance plan and inspection test plan as per various job requirements

Initial, in-process and final inspection of Main tube, Auxiliary Lines

Verification of PWHT charts, material certifications and hardness of various materials

Preparation of welding checklists and final documentation with NDT reports

Client & Third party Coordination for inspection activities

STSA SINGAPORE PT LTD. May’2011 Oct’2011

PROFESSIONAL EXPERIENCE – III

DESIGNATION: QUALITY CONTROL INSPECTOR

CAMERON INTERNATIONAL MALAYSIA SYSTEMS SDN BHD Sep’2010 to May’2011

QUALITY

Familiar with SAP system

CMM (FARO ARM)

First Article Inspection

Coordinate with Third Party Inspector and customer inspector

Visual and dimensional inspection

Hardness testing

Identification and stamping

Material Control Procedure Material Traceability

Review Drawing and Specification

Final Inspection in Machined Product

Follow the Customer Material Spec,

Prepare the Supplier and Vendor Evaluation Report

Inspect the Vendor and Commercial Products

Carry-out Visual Inspection and Dimensional Inspection.

PROFESSIONAL EXPERIENCE – IV

DESIGNATION: QUALITY INSPECTOR

CACTUS ENGG & TRADING PTE LTD Aug’2008 to Aug’2010

QUALITY

Incoming and in process inspection of fabricated and machined parts

Preparation of reports

Coordinate with Third Party Inspector and customer inspector

Visual and dimensional inspection

Hardness testing

Identification and stamping

Material Control Procedure Material Traceability

Review Drawing and Specification

Final Inspection in Machined Product

Follow the Customer Material Spec,

Prepare the Supplier and Vendor Evaluation Report

Inspect the Vendor and Commercial Products

Check Material Hardness

Carry-out Visual Inspection and Dimensional Inspection

Follow the API Specification

PROFESSIONAL EXPERIENCE – V

DESIGNATION: MACHINIST

FONG LEE METAL INDUSTRIES PTE LTE Oct’ 2006 to Aug’ 2008

MACHINIST

Report and be responsible to the Supervisor / Production and Quality departments.

Studying, interpreting and understanding technical drawings production components.

Process planning for the job, Selection of materials, machines, tools and measuring instruments,

Able to determine the dimension of the machined components and performing the most appropriate methods of manufacturing process.

Required to conduct test and modify the manufactured components as required. Examples of tests performed include hardness and warp age test of hardened parts

Continuous improvement projects, new and old based on instruction from head of the department,

Process sheets preparation for the easiest way of production and simplify the operator risks,

Special tools for Drilling and tapping center CNC machines,

PROFESSIONAL EXPERIENCE – VI

DESIGNATION: MACHINIST

SRI RANGANATHAR INDUSTRIES PVT LTD., June’2001 to September’2006

MACHINIST

Report and be responsible to the Supervisor / Production and Quality departments.

Studying, interpreting and understanding technical drawings production components.

Process planning for the job, Selection of materials, machines, tools and measuring instruments,

Able to determine the dimension of the machined components and performing the most appropriate methods of manufacturing process.

Required to conduct test and modify the manufactured components as required. Examples of tests performed include hardness and warp age test of hardened parts

Prepare detailed project plans, progress reports and presentations to management,

Generate and manage project documentation according to prescribed guidelines

STRENGTHS:

Determinate & Commitment.

Self motivated.

Ability to grasp and learn concepts quickly & Team-Worker.

Open enough to accept new ideas & highly hardworking.

Finding the areas for Continuous improvement.

PERSONAL PARTICULARS:

Date of Birth : 25-07-1983

Gender : Male

Martial Status : Married

Father’s Name : Raman

Nationality : Indian

Permit (Visa type) : Permanent Resident (Singapore)

I.C Number : S8382210D

Language Known : English

Availability : 15 Days notice

DECLARATION

I Hereby declare that the above given details are true to the best of my knowledge

Regards.

Place: Singapore

Date:

(RAMAN MOHNARAJ)

Contact this candidate