Adeben Castile
Union City, GA 30291
ac0smz@r.postjobfree.com
OBJECTIVE
Secure a challenging position with your organization that will utilize my experience, education, and skills and provide opportunities for growth and advancement.
EXPERIENCE
05/12/2015- 03/14/2017 Martin-Brower
Driver Associate
Responsible for delivering products to McDonalds restaurants in a timely and professional manner.
Offload products and provide excellent service to customers.
Drive tractor/trailer in a safe and proficient manner.
Responsible for inspecting equipment to ensure safe and operational conditions.
Ensure reefer unit is set on correct temps for specific products
Perform daily inspections pre trip and post trip inspections.
Ensure compliance with DOT rules and regulations and company policies.
Ensure all paperwork filled out adequately.
Communicate with dispatchers and customers on product that is damaged.
Refuel tractor and trailer at end of trip.
02/18/2014-04/02/2015 Werner Enterprise Inc, Lithia Springs, GA
CDL Class Over the Road Truck Driver
Customers, reporting any concerns or issues
Ensures Cultivate quality customer relationships, acting as liaison between Werner Management and safe, accurate, timely, and efficient deliveries of products to our customers
Perform proper equipment maintenance as needed
Collaborate with management and sales representatives to communicate customer concerns and resolutions
Perform daily pre/post trip inspection of vehicles
Complete daily paperwork and computer data entry
Able to write, speak, and communicate in English
Demonstrate the ability to operate equipment in a professional & safe manner
Strong attention to detail
Effective problem-solving, communication, and organization skills
Ability to satisfy the DOT requirements
Able to pass a physical ability test and drug screen
Some computer knowledge
Tanker, Hazmat, and Doubles/Triples endorsement
2/3/2013-03/18/2013 Pepsi Co., Mesquite, TX
PT Loader
Using voice pick headset and RF scanners to select product
Picking cases for specific order and cleaning spills on the floor
Loading cases on to pallet by tie
Leveling cases for other shifts to pick at the end of shift
Wrap pallet with shrink wrap and apply shipping label
8/18/2010-11/2/2011 Web Industries Inc., Suwanee, GA
Slitter Machine Operator/assembler
Examine completed work pieces for defects, such as chipped edges or marred surfaces and sort defective pieces according to types of flaws.
Measure completed work pieces to verify conformance to specifications, using micrometers, gauges, calipers, templates, or rulers.
Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.
Start machines, monitor their operations, and record operational data on computer system and on to paperwork for record keeping.
Test and adjust machine speeds or actions, according to product specifications, using gauges and hand tools and power tools.
Load work pieces, such as, composite carbon fiber onto winder.
Read work orders or production schedules to determine specifications, such as other materials to be used for operation. Set specific tolerances as the order indicated.
Install, align, and lock specified punches, dies, cutting blades, or other fixtures in rams or beds of machines, using gauges, templates, feelers, shims, and hand tools.
Position, align, and secure work pieces against fixtures or stops on machine beds or on dies.
Position guides, stops, holding blocks, or other fixtures to secure and direct work pieces, using hand tools and measuring devices.
Lubricate rotation parts like gears with oil and clean part with cleaning solutions.
Turn controls to set cutting speeds, and feed rates for specified operations.
Plan sequences of operations, applying knowledge of physical properties of work piece materials.
Mark identifying information on the composite material as suggested on instructions.
Place composite material on cutting tables, manually or using hoist to lift to put on winder
Replace defective blades by taking off shaft and sliding blade assembly off the support bar.
Set blade tensions, heights, and angles to perform prescribed cuts, using wrenches.
Sharpen dulled blades, using bench grinders, abrasive wheels, or lathes.
Thread ends of metal coils from reels through slitters and secure ends.
Preheat work pieces, using heating furnaces or hand torches.
3/28/2005-9/18/2009 GATORADE, INC., Atlanta, GA
Distribution Center
Operate a forklift in high speed manufacturing environment.
Operate and maneuvered boom lift to safely take down product that shifted off pallet from the racking system.
Entered data on LXE system, and working with computers. Inventory Management Software used Red Prairie.
Use of RF scanners to scan LPN barcode labels on product to be located in racks or bins.
Maintain cleanliness in assign areas and operate floor scrubber in a safe and orderly manner.
Sort and store partial cases of product returned on route trucks.
Retrieve product and load truck according to load sheet; have truck checked.
Operate and monitor line, removing or shifting materials and or finished products as necessary to facilitate proper flow and machine operation.
Count floor and truck inventories and counting inventory in the warehouse.
Expedite repairs to line; working with maintenance as necessary.
Maintain all safety standards and working with racking systems and loading/unloading pallets (for example, pulling and placing pallets on/off vertical product racking systems and trucks and maximizing storage by stacking products vertically).
Able to lift 40-80lbs cases while reaching, climbing, bending, walking/standing to move product through the warehouse, or the use of lifts for larger objects.
Build load: Drive hi-lift to picking area and build pallet mark load ticket for out of stock items.
Finish load: Wrap pallet when complete with LPN barcode.
Operate dock locking & ramp system so the trailer doesn’t move and choking the tires.
Make sure shipping documentation and seal is place in the trailer.
Replenish product in inventory and do inventory count.
Communicate effectively over radios.
Gatorade Plant Atlanta, GA
Labeler Operator
Operate, start and shut down operation, monitor, troubleshoot automated robotic equipment.
Documented all defects during inspections checks
Maintain machines and detect problems when indicator light comes on.
Involved in kaizen
Involved in team changeovers, removing bolts, screws, washers, nuts and remove star wheel, infeed worm, bottle plates, and other components of the machine using powered tools to run other sizes of bottling
Document cracked caps, or missing caps, loose caps, low fills, and high fills.
Check temperature of the product with thermometers, check torque specs, checked glue temperatures reading on elements.
Checked date codes on bottles.
Involved in TPM training, and troubleshoot basic mechanical systems.
Sanitize equipment by using industrial chemicals and supplies.
Sanitize the cooler and did CIP checks.
Communicated over the radios to the next operator what problems to look for up ahead
such as, flagging labels, dents in bottles, bottles with a cocked or missing caps.
Use standards of operation OSHA requirements on minimum and maximum speeds, signaling, and using safety precautions.
Identify correct labeling material by flavoring and SKU codes.
Use and wear Personal Protective Equipment
Start, and shut down operation.
Ensure a safe working environment, follow safety procedures, and report any accidents, incidents, and unsafe conditions.
Ensure established housekeeping standards are met.
Ensure daily production schedule is complete.
Perform Preventive Maintenance Checklist
Ensure finished products meet established Quality Control Standards
Safe handling of material using hoist and proper handling methods
1995-2004 HABASIT BELTING, INC. Suwannee, GA
Machine Operator
Control machines and processes using control mechanisms and physical activity to operate machines and processes.
Use hands and arms in handling, installing, positioning, and moving materials, and manipulating things.
Provide information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person.
Inspect equipment, structures, and materials to identify the cause of errors or other problems or defects.
Enter, record, store, or maintain information in written or electronic/magnetic form.
Monitoring and reviewing information from materials, events, or the environment, to detect or assess problems.
Analyzing information and evaluating results to choose the best solution and solve problems.
Using relevant information and individual judgment to determine whether events or processes comply with laws, regulations, or standards.
Using computers and computer systems to program, write software, set up functions, enter data, or process information.
Servicing, repairing, calibrating, regulating, tuning, or testing machines, devices, and equipment that operates primarily on the basis of electrical or electronic principles.
Developing constructive and cooperative working relationships with others
Estimating sizes, distances, and quantities; or determining time, costs, resources, or materials needed to perform a work activity.
EDUCATION
2011- 2012
GWINNETT TECHNICAL COLLEGE
Prerequisite courses
Georgia Ready Certification