Joseph G. Weikel
Journeyman
Millwright/Limited
Maintenance
Electrician
Joseph G. Weikel
Lebanon, Or. 97355
ac0fzu@r.postjobfree.com
ᅳ
Skills
Limited Maintenance Electrician
Journeyman Millwright
Boiler Training
Boom Crane Operators Certification
Hazwopper Training
EPA Method 9 Visible Emission Observation (VEO)
Certification
RCRA (Resource Conservation Recovery Act) Hazardous Waste Training
ODOT (Oregon Department of Transportation)Hazardous Waste Transportation Training
Microsoft Excel Orientation
ABB Drive Orientation
QS 9001 Training
Leadership Flight School Certification
Lean Manufacturing Training
6S - Safety, Sort, Simplify, Shine, Standardize and Sustain.
Best Manufacturing Practices
ᅳ
Experience
Entek International I nc. / S hift Maintenance Technician III and Limited Maintenance Electrician
2016 - PRESENT
● Responsible for the preventative maintenance and repair of any and all equipment in the production facility as well as all ancillary equipment the facility needs to operate on a 24 hour a day basis such as;
Industrial air compressors with electrically heated desiccant dryers
Boilers
De-aeration tanks
Flash tanks
Industrial water softeners
Cooling towers
Carbon bed air scrubbing systems
Evaporators
Condensers
Chillers
High volume air conditioning systems
Hydraulic systems
Demister waste vacuum systems
Solid waste vacuum systems
Fans
Blowers
AC and DC Electric motors
Gear boxes
Plant air quality units and filter systems
Dust collection bag houses
Dense and dilute phase transporter's etc...
● Daily walk through of facility machinery and equipment, Inspecting for any issues or possibility of future issues.
● Troubleshooting broken down machinery and assisting production in troubleshooting and training of how the equipment should operate.
● Conducting machinery alignment of equipment such as;
Belts and Sheaves
Chains and cogs
Motors and gearboxes with couplers etc...
Using equipment such as;
■ Laser alignment tools
■ Shims
■ Straight edges
■ Calipers
■ Dial indicators etc...
● Calibration of load cells and also MultiRAE, Miron and SAM I Max air analyzers.
● Rebuilding/replacing many different pieces of equipment such as;
Pumps
Mechanical seals
Roll bearings and bushings
Meters etc...
Steam line components such as;
■ Regulators
■ Valves
■ Pilot valves
■ Gauges
■ Expansion joints etc
● Forklift maintenance and preventative maintenance.
● Maintenance and troubleshooting of Albany High Speed Doors, motor driven garage doors, manual garage doors and man doors with hydraulic openers.
ᅳ
Experience
● Troubleshooting, repair and replacement of motors and drives both alternating and direct current.
● Setting up and welding with;
TIG welding for mild or Stainless steel and aluminum
Stick welding with 6010, 6011, 7018 and 7024 etc...
MIG welding - gas or flux core with steel or aluminum.
● At this time I am responsible for all lead maintenance responsibilities except team members evaluations, along with all shift Maintenance Technician III and Limited Maintenance Electrician work needed.
● Maintaining a daily digital log of jobs completed utilizing Microsoft Word.
● Keeping track of parts used, stocking parts and ordering of parts along with work orders, observations and purchase orders utilizing Microsoft AX 2012.
● Coming up with different ideas or fabricating pieces and parts for breakdowns when the correct parts are unavailable, thinking out of the box.
● Assisting in the ancillary department as needed and as time allows.
● Responsible for spill response of any hazardous material spills onsite as well as documenting and investigating t hem and designing future policies and procedures to
alleviate them.
● Responsible for maintaining fire prevention and
extinguishing small fires if a fire should occur.
Entek International I nc. / A ncillary Lead/Specialist 2012- 2016
● Designed and maintained the training manual for the operation, preventative maintenance and
documentation of the Ancillary department equipment as listed above.
● Designed and maintained the preventative maintenance program for all the Ancillary equipment.
● Assisted with Designing and maintaining the monthly leak inspection and response documentation for all lines and equipment that utilized solvent as a degreaser.
● Training team members, maintaining and ensuring that the inspection, documentation and preventative
maintenance were completed monthly for all lines and equipment that utilized solvent as a degreaser.
● In charge of, trained team for and assisted with the operation, preventative maintenance and repair of all Ancillary equipment listed above.
● In charge of chemical testing and dosing required for the facilities;
Boilers
Cooling towers
Water softeners
Chillers
Effluent
● In charge of testing and adjusting the wastewater leaving the plant required to meet the city of Lebanon permits specifications for;
PH
Metal content
Total Suspended Solids
Volatile Organic Compounds
Biochemical Oxygen Demand
Temperature
● Obtained the RCRA and ODOT training for;
Accumulation
Storage
Shipment
And disposal of;
■ Solid waste
■ Hazardous waste
■ Universal waste
■ Used oil waste
● Obtained hazardous waste 48 hour training with all Hazwoper 8 hour refresher courses up to date.
● Trained team for and assisted with ensuring state and federal compliance with all satellite and standard waste stations including;
Dumpsters
Hazardous waste
Nonhazardous waste
Universal waste
Used oil waste
● Worked diligently with the facilities Environmental Compliance Officer and the hazardous/universal waste transportation company (Univar) along with training my team for and assisting with ensuring the requirements were legally met for all satellite and standard
hazardous/nonhazardous waste;
Stations
Storage rooms
Packaging
Shipping
Paperwork
● Documented, organized and prepared all waste
shipments and signing of the hazardous waste shipping manifests.
● Assisted in updating and maintaining the Spill
Prevention Control and Countermeasure (SPCC) plan.
● Training team members and creating, maintaining and ensuring that the inspection, documentation and
preventative maintenance of said SPCC plan were
accomplished monthly.
● Created and maintained documentation, trained team for and assisted with maintaining the integrity of all;
Oil tanks
Solvent tanks
Containment pits
Secondary containment pits onsite.
● Designed and maintained the stormwater basin maintenance, sustainability plan and documentation.
● Trained team for and assisted with the preventative maintenance of our onsite stormwater media and the waste produced from all drain basin's on the property.
● Trained team for and assisted with Title V permit responsibilities for the facilities solvent emissions.
● Applied my EPA method 9 certification for Visible Emission Observation and documentation for boiler
emissions when burning diesel as per Method 9 req’s. ᅳ
● Use computers for various applications, such as
database management and word processing.
● Very familiar with programs such as Microsoft Office and Microsoft Dynamics AX 2012.
● Compose, type and distribute meeting notes, routine correspondence and reports such as;
Statistical or monthly reports
Monthly leak response reports
Hazardous waste shipping manifests
Reports required by the;
● Environmental Protection Agency,
● Department of Transportation
● Department of Environmental Quality.
● Conduct searches to find needed information, parts and pricing using such sources as the Internet, machine manuals and blueprints.
● Train and assist team with computer usage.
● Set up and manage paper and electronic filing systems.
● Perform payroll functions for team, such as maintaining and processing timekeeping information.
● Answer telephones, give information to callers, take messages, converse with and schedule appointments for vendors and contractors.
● Greet vendors and contractors and discuss equipment issues and upgrades.
● Establish work procedures or schedules and monitor the daily work of team members.
● Manage projects or contribute to committee or team work.
● Conduct inventory, order and dispense supplies.
● First aid certified.
Experience
ᅳ
Experience
Entek International Inc. / S hift Maintenance Technician - Limited Maintenance Electrician
2006 - 2012
● All the same job experiences as listed in the S hift Maintenance Technician III - Limited Maintenance Electrician section listed above.
Entek International Inc. / S hift Leadman - Lead Operator 2000 - 2006
● Assist supervisor with team members evaluations.
● Assist team members with troubleshooting production operations.
● Assist with training team members.
● Monitored product specification through the quality assurance lab and assist operators with adjustments or ideas for keeping the product in spec.
● Troubleshooting production issues with operation and product specification.
● Assist maintenance with tooling changes, maintenance and preventative maintenance.
● Keep track of notables, issues and accomplishments that came up throughout the shift and document them utilizing Microsoft Excel.
● Schedule overtime for upcoming shifts and adjust team members positions when call ins prohibit the shift to run as normal.
● Ensuring all areas of the facility were in touring condition
(very clean) as time allowed.
● Inspecting and correcting production paperwork for the shift and compile all paperwork onto an excel worksheet for the daily report.
● First aid certified.
ᅳ
Experience
● Shift safety committee member.
Entek International Inc. / O perator
1994 - 2000
● Regrind production waste.
● Production top level Mixer Operator.
● Production top level Pelletizer Operator.
● Production top level Extractor Operator.
● Production top level Winder Operator.
● Production top level Extruder Operator.
● Kept daily log of shift events.
● Swept and Mopped floors and wiping down equipment daily. ᅳ
Education
Linn Benton Community College
September 2009- June 2012
4 Year Journeyman Millwright finished in 3 years
Linn Benton Community College
September 2007 - June 2009
2 year Limited Maintenance Electrician