Donald Howes
Palm Harbor, Fl. 34683
*** – 590 – 1199
Employment
January 9, 2017 – April 20, 2017 DSE Inc.
Tampa, Fl.
Operated Mitsubishi Acme Gridely multi-spindle automatic lathes as a chucker. I was responsible for tooling changes, adjustments and monitoring product for conformance to customer requirements.
September 2016 – January 2017 Manpower Employment
Tampa, FL.
Operating Mitsubishi Acme Gridely multi-spindle automatic lathes used as chuckers.
June 2016 – September 2016 Express Employment (MSP)
Clearwater, FL.
I operated Euroturn multi-spindle automatic lathes in the Euroturn dept.
February 3, 2015 – June 2016 Woodward
Fort Collins, CO.
Worked in Hobs department cutting splines, serrations and gears on parts using Barber Nicholes, Koepfer 153, Mikron hob machines, Lorenz, and Fellows shaper machines.
August 18, 2014- January 31, 2015 Vestas
Windsor CO.
Production worker in the V110 shells dept. Building, injecting resin, and glueing, 54 meter wind turbin blades. I installed the lightning protection system as well as was training as a quality inspector.
May 2014- August 2014 Elwood Staffing
Greeley Co.
Production Worker
Work on production floor building wind turbine blades at Vestas.
March 2014 –May 2014 Lowes
Loveland Co.
Assembler
Assembled grills, lawn mowers, shelves, tables, ect. As seasonal assembler I assembled anything that needed out together for customers and for displays.
November 2013 – March 2014 Ron Grob Co.
Loveland Co.
Machine Operator
I operated lathes, mills, metal cutting band saw, and thread rolling machines to fabricate threaded shafts, lift nuts, and keyed couplings to customer prints.
April 2011 – November 2013 Mersen USA
Salem, Va.
Machine Operator
Operated vertical turning lathes, horizontal lathes, vertical mill, and horizontal mill. Used both overhead hoist and fork lift to load and unload parts on and off the machines and to move parts around the plant.
September 2008 – March 2011 Masters Machine
Ginny Manning
Machine Operator / Set Up
Set up and operate large multi-spindle lathes, and did trouble shooting on the machines and processes on Wickman 1 x 6, and Euroturn multi-spindle lathes. I was responsible for reading customer prints and company run sheets, to make proper changes and adjustments to ensure product being produced were within print parameters and of a quality that is in keeping with company standards.
July 2006 – August 2008 Ron Grob Co.
Loveland, Co.
Machine Operator
I used vertical mill, engine lathe, and thread rolling machine to fill customer orders for threaded, keyed, and tapped shafts as well as lift nuts for customers. Ron Grob also introduced me to centerless grinding.
May 2006 - July 2006 Burris Optics
Greeley, Co.
Quality Inspector
I did in process inspections at the machines, first article inspections, and final inspections for conformance to print, appearance, and functionality. I filled out and filed inspection reports of conformance and of non-conformance.
January 2006 - May 2006 Kodak
Windsor, Co.
Perf. Machine Operator
I operated machines that perforate the 16 mm film. My duties included the proper loading and running of the perforating machines, packaging, and quality of my production. I did receive recognition for excellent work performed.
November 2005 – January 2006 SOS Staffing Services
Greeley, Co.
Quality Inspector
Burris Scopes of Greeley
As a temporary quality inspector I went to the machines in operation to inspect the product for conformance to print, visual appearance and functionality. I filled out daily logs and did first article inspections.
June 1987 – October 2005 Masters Machine
Round Pond, Me.
Machine Specialist
As a lead man I was responsible for machine set-up, training, troubleshooting, and maintenance of large multi-spindle automatic lathes. / New Britain model 52’s and Wickman 1 ”x6 spinde automatic lathes. Other duties included ensuring quality and precision of the manufactured product, scheduling of personnel and machines for overtime. I also strove for a safe work environment. The run charts, control sheets, and process documents that I developed became adopted into ISO format and documentation as well as used for training tools.
Donald Howes
2350 Cyress Pond Rd. #1513
Palm Harbor, Fl. 34683
970 – 590 – 1199
Employment
January 9, 2017 – April 20, 2017 DSE Inc.
Tampa, Fl.
Operated Mitsubishi Acme Gridely multi-spindle automatic lathes as a chucker. I was responsible for tooling changes, adjustments and monitoring product for conformance to customer requirements.
September 2016 – January 2017 Manpower Employment
Tampa, FL.
Operating Mitsubishi Acme Gridely multi-spindle automatic lathes used as chuckers.
June 2016 – September 2016 Express Employment (MSP)
Clearwater, FL.
I operated Euroturn multi-spindle automatic lathes in the Euroturn dept.
February 3, 2015 – June 2016 Woodward
Fort Collins, CO.
Worked in Hobs department cutting splines, serrations and gears on parts using Barber Nicholes, Koepfer 153, Mikron hob machines, Lorenz, and Fellows shaper machines.
August 18, 2014- January 31, 2015 Vestas
Windsor CO.
Production worker in the V110 shells dept. Building, injecting resin, and glueing, 54 meter wind turbin blades. I installed the lightning protection system as well as was training as a quality inspector.
May 2014- August 2014 Elwood Staffing
Greeley Co.
Production Worker
Work on production floor building wind turbine blades at Vestas.
March 2014 –May 2014 Lowes
Loveland Co.
Assembler
Assembled grills, lawn mowers, shelves, tables, ect. As seasonal assembler I assembled anything that needed out together for customers and for displays.
November 2013 – March 2014 Ron Grob Co.
Loveland Co.
Machine Operator
I operated lathes, mills, metal cutting band saw, and thread rolling machines to fabricate threaded shafts, lift nuts, and keyed couplings to customer prints.
April 2011 – November 2013 Mersen USA
Salem, Va.
Machine Operator
Operated vertical turning lathes, horizontal lathes, vertical mill, and horizontal mill. Used both overhead hoist and fork lift to load and unload parts on and off the machines and to move parts around the plant.
September 2008 – March 2011 Masters Machine
Ginny Manning
Machine Operator / Set Up
Set up and operate large multi-spindle lathes, and did trouble shooting on the machines and processes on Wickman 1 x 6, and Euroturn multi-spindle lathes. I was responsible for reading customer prints and company run sheets, to make proper changes and adjustments to ensure product being produced were within print parameters and of a quality that is in keeping with company standards.
July 2006 – August 2008 Ron Grob Co.
Loveland, Co.
Machine Operator
I used vertical mill, engine lathe, and thread rolling machine to fill customer orders for threaded, keyed, and tapped shafts as well as lift nuts for customers. Ron Grob also introduced me to centerless grinding.
May 2006 - July 2006 Burris Optics
Greeley, Co.
Quality Inspector
I did in process inspections at the machines, first article inspections, and final inspections for conformance to print, appearance, and functionality. I filled out and filed inspection reports of conformance and of non-conformance.
January 2006 - May 2006 Kodak
Windsor, Co.
Perf. Machine Operator
I operated machines that perforate the 16 mm film. My duties included the proper loading and running of the perforating machines, packaging, and quality of my production. I did receive recognition for excellent work performed.
November 2005 – January 2006 SOS Staffing Services
Greeley, Co.
Quality Inspector
Burris Scopes of Greeley
As a temporary quality inspector I went to the machines in operation to inspect the product for conformance to print, visual appearance and functionality. I filled out daily logs and did first article inspections.
June 1987 – October 2005 Masters Machine
Round Pond, Me.
Machine Specialist
As a lead man I was responsible for machine set-up, training, troubleshooting, and maintenance of large multi-spindle automatic lathes. / New Britain model 52’s and Wickman 1 ”x6 spinde automatic lathes. Other duties included ensuring quality and precision of the manufactured product, scheduling of personnel and machines for overtime. I also strove for a safe work environment. The run charts, control sheets, and process documents that I developed became adopted into ISO format and documentation as well as used for training tools.
Donald Howes
2350 Cyress Pond Rd. #1513
Palm Harbor, Fl. 34683
970 – 590 – 1199
Employment
January 9, 2017 – April 20, 2017 DSE Inc.
Tampa, Fl.
Operated Mitsubishi Acme Gridely multi-spindle automatic lathes as a chucker. I was responsible for tooling changes, adjustments and monitoring product for conformance to customer requirements.
September 2016 – January 2017 Manpower Employment
Tampa, FL.
Operating Mitsubishi Acme Gridely multi-spindle automatic lathes used as chuckers.
June 2016 – September 2016 Express Employment (MSP)
Clearwater, FL.
I operated Euroturn multi-spindle automatic lathes in the Euroturn dept.
February 3, 2015 – June 2016 Woodward
Fort Collins, CO.
Worked in Hobs department cutting splines, serrations and gears on parts using Barber Nicholes, Koepfer 153, Mikron hob machines, Lorenz, and Fellows shaper machines.
August 18, 2014- January 31, 2015 Vestas
Windsor CO.
Production worker in the V110 shells dept. Building, injecting resin, and glueing, 54 meter wind turbin blades. I installed the lightning protection system as well as was training as a quality inspector.
May 2014- August 2014 Elwood Staffing
Greeley Co.
Production Worker
Work on production floor building wind turbine blades at Vestas.
March 2014 –May 2014 Lowes
Loveland Co.
Assembler
Assembled grills, lawn mowers, shelves, tables, ect. As seasonal assembler I assembled anything that needed out together for customers and for displays.
November 2013 – March 2014 Ron Grob Co.
Loveland Co.
Machine Operator
I operated lathes, mills, metal cutting band saw, and thread rolling machines to fabricate threaded shafts, lift nuts, and keyed couplings to customer prints.
April 2011 – November 2013 Mersen USA
Salem, Va.
Machine Operator
Operated vertical turning lathes, horizontal lathes, vertical mill, and horizontal mill. Used both overhead hoist and fork lift to load and unload parts on and off the machines and to move parts around the plant.
September 2008 – March 2011 Masters Machine
Ginny Manning
Machine Operator / Set Up
Set up and operate large multi-spindle lathes, and did trouble shooting on the machines and processes on Wickman 1 x 6, and Euroturn multi-spindle lathes. I was responsible for reading customer prints and company run sheets, to make proper changes and adjustments to ensure product being produced were within print parameters and of a quality that is in keeping with company standards.
July 2006 – August 2008 Ron Grob Co.
Loveland, Co.
Machine Operator
I used vertical mill, engine lathe, and thread rolling machine to fill customer orders for threaded, keyed, and tapped shafts as well as lift nuts for customers. Ron Grob also introduced me to centerless grinding.
May 2006 - July 2006 Burris Optics
Greeley, Co.
Quality Inspector
I did in process inspections at the machines, first article inspections, and final inspections for conformance to print, appearance, and functionality. I filled out and filed inspection reports of conformance and of non-conformance.
January 2006 - May 2006 Kodak
Windsor, Co.
Perf. Machine Operator
I operated machines that perforate the 16 mm film. My duties included the proper loading and running of the perforating machines, packaging, and quality of my production. I did receive recognition for excellent work performed.
November 2005 – January 2006 SOS Staffing Services
Greeley, Co.
Quality Inspector
Burris Scopes of Greeley
As a temporary quality inspector I went to the machines in operation to inspect the product for conformance to print, visual appearance and functionality. I filled out daily logs and did first article inspections.
June 1987 – October 2005 Masters Machine
Round Pond, Me.
Machine Specialist
As a lead man I was responsible for machine set-up, training, troubleshooting, and maintenance of large multi-spindle automatic lathes. / New Britain model 52’s and Wickman 1 ”x6 spinde automatic lathes. Other duties included ensuring quality and precision of the manufactured product, scheduling of personnel and machines for overtime. I also strove for a safe work environment. The run charts, control sheets, and process documents that I developed became adopted into ISO format and documentation as well as used for training tools.