Power Plant Welding
Resume:
Name:Eduardo T Velasco
Address:*** ****** ****** ****** ******* rizal
Email:ac06y3@r.postjobfree.com
Skype:whinbhet
Mobile:+639*********
Work experience
Work summary:c
Over19 years dedicated work experience as a tig welder gtaw/smaw for various oil,gas facilities water and power plant,refinery construction,engineering and manufacturing industries that I have experienced work and travelled in so many countries such Malaysia,angola,Sudan,Qatar,Saudi Abu Dhabi and lastly Nigeria I have knowledge techniques and skills to perform welding in different kind of material piping and structural such carbon steel,stainless,crime,alloy,incomes,Monel,copper nickel,titanium,cladding pipe and duplex also have enough knowledge to perform welding in structural job trained in welding course and also had opportunity to make welding procedure in asmeIX qualification test
Duties and responsibilities :
Always check and clean the joint before start to weld
Monitor equipment for appropriate usage and temperature
Maintaina through knowledge of universal standards and specification in order to meet the task code and legal requirements
Developed working knowledge of dozen of methods used for welding a variety of materials and Capone to
Trim metal components using heat,fire and electricity
Monitor works inviromnt for hazard and maintain healthy ventilation level to avoid particle or gas inhalation
Follows safety protocol,including wearing heat resistant gloves,protective mask and safety shoes
Work in the construction and mnufacturing
Company :Aveon offshore ltd
Position:tig welder gtaw/smaw carbon&duplex
Date:October 7,2014-June 12,2017
Location:portharcourt nigeria
Project:egina OLT buoy,egina SPS module & foundation
Egina manifold and jumper spool
Job discription
Assesses equipment,structure,material and job specification for appropriate welding positions and method.work in the construction or manufacturing industries.
follow the procedure of asme IX performing weld piping and structural welding carbon steel ibeam,channel,tubular,plate.structural fabrication
repair and weld manual welding 6g WPS pre U-U-2-G-A-C (AWS)D1.1 filler rod E-7016-1+E7018-1 thickness 5mm unlimited
and also performed welding in piping manifold and jumper duplex and super duplex material WPS 10H-10H-1-G-A(LT)065(AWS)Err2594-Er2209 thickness21.95mm diameter 2”6”14” ASME IX 2013 and GS PVV614 rev06 all pipe welding.are subjected for radio graphic,ultrasonic test and magnetic penetrantinspection as per required by the client
Company:Sonamet industries S.A.R.L
Position:tig welder gtaw/smaw carbonsteel,inconel,cladding pipe,stainless and duplex
Date:April 2,2012-July 1,201
Location:Lobito angola africa
Project:clov surf,south nimba jacket&piles clov buoyancy clov subsea
Job discription:
Used my ability to weld carbon steel,angle iron,channel,tubular,plate structural fabrication
repair and weld performed manual welding 6g WPS SMA-300 AWS -D1.1 thickness12.7mm diameter 8”
perform welding in fabrication and jobsite welding in piping using tig and arc WPS-CRX-582 (AWS)API-1104 thickness 13.43mm diameter 4”
WPS BRT-621 (AWS) API 1104 thickness 19mm diameter 12” WPS CRA-590A (AWS) OS F10,API 1104 thickness 22mm+3mm diameter 329.5 mm
perform welding in jacket,buoyancy surf nimba using gtaw/same sunjected all pipe and structural 100%radio graphic
Company:Hyundai/IWI engineering & construction
Position:tig welder gtaw/smaw carbon,stainless and titanium
Date:July 25,2011-feb 8,2012
Location:habshan 5 Abu Dhabi
Project:habshan IGD-05 utilities and offsite project
Job discription:
Iwas trained one month to trained how to weld titanium pipe
after I passed the training I performed welding titanium pipe WPS HD-Ti-M001 (AWS)ASME sec IX thickness 2.77mm diameter 2”
and also I perform welding in fabrication shop of habsan carbon steel gtaw/small WPS CRX -582 (AWS)API-1104 thickness 17.1mm
WPS HD-WPS-cs-m001 (AWS)ASMW sec IX thickness 5.54mm diameter 2”
welding pipe support,structural fabrication,welding pipe tig in rootpass and smaw for filling capping subjected 100%radio graphic test
Company:Sonamet industries S.A.R.L
Position:tig welder gtaw/smaw carbon steel,inconel cladding,duplex, stainless
Date:July 4,2006-may 30,2010
Location: Lobito angola africa
Project:HRT poly urethane guide frame,water injection,53 subsea structure,production loop
Spool and well jumper,manifold and piles
Job discription
Used my ability to weld carbon steel,angle iron,channel,tubular,plate structural fabrication
repair and weld performed manual welding 6g WPS SMA-300 AWS -D1.1 thickness12.7mm diameter 8”
perform welding in fabrication and jobsite welding in piping using tig and arc WPS-CRX-582 (AWS)API-1104 thickness 13.43mm diameter 4”
WPS BRT-621 (AWS) API 1104 thickness 19mm diameter 12” WPS CRA-590A (AWS) OS F10,API 1104 thickness 22mm+3mm diameter 329.5 mm
perform welding in jacket,buoyancy surf nimba using gtaw/same sunjected all pipe and structural 100%radio graphic
Company:Qatar engineering and construction co.wll
Position:tig welder gtaw/smaw carbon steel,stainless,Monel
Date:dec13,2004-feb 7,2006
Locatio:salwa messaged Doha Qatar
Project:qapco ethylene plant expansion,oryx girl
Separation unit asu
Job discription:
Installation of 8”-20” with 375 thickness pipe line from NGL Plant to Qapco EPL
. Re assigned and weld in fabrication of carbon steel,stainless and Monel alloy steel in Salwa fabrication shop
.After finished job in fabrication I transfer in jobsite prior to install all the stainless and Monel pipe WPS P-3210 AWS class no Er 308L thickness 10.97 diameter 6”
WPS M01 AWS class no ERNiCU-7 thickness 12.7mm diameter 8”
WPS P4111 AWS class no ER 70s-3 thickness 5.5mm diameter 2”
all pipe welder subjected 100% radiographic as per required by the client
Company:Kenana sugar company
Position: welder /fabricator
Date:July 15,2003-Jan 14,2004
Location south Khartoum Sudan
Project:expansion of kenana sugar company
Job discription:
Assigned in pipe rack as tig and arc welde. Qualified of
carbon steel, stainless steel and alloy steel,
welding butt
joints which are subject for NDT examination as per
requirements in welding procedure
specification in ASME
IX welding code.
Company: Akkila company limited
Position:pipe welder
Date:oct 21,2002-Jan 19,2003
Location: Fujairah Abu Dhabi
Project:Fujairah water and power pipe line
Job discription:
Assigned to performed welding and repair in carbon steel 60” pipe diameter
welding in lay down and pipeline in the desert using smaw all pipe weld subjected 100%radio graphic test
Company: hiap sheng/thong sheng Engineering ltd
Position: foreman,tig welder,carbon steel,stainless
Inconel,alloy,Crome,lowtemp and copper
Date:march 9,1996-September 1,2001
Location:Singapore
Project:Sakra power plant,bukom power plant Exxon mobile
Job discription:
I was worked in Singapore 1996 as a tig welder gtaw/smaw complete welding
start from pipe rock structure to piping job and welding in refinery shut down and construction welding in high pressure pipe line
high pressure pipe steam turbines,digester area for full welding duplex pipe and stainless,welding in heater,and boiler tie in,low and high pressure line steam
assisting in the maintenance and repair
after two years I'm promoted into welding foreman to supervised and trained welders to improve quality of work performed to enchanted welding procedure led in development of new procedure
consistently ensure that the job were done with the best quality as well as being on budget and schedule and job were safe for the welder
and that all welder were following safety rules
Company:EEI Corporation
Position:tig welder gtaw/smaw carbon steel
Alloy,stainless steel
Date:march 23,1994-Jan 12,1995
Location: pagbilao Quezon Philippine
Project:pagbilao coal fired power plant 600mw
Job discription:
I was qualified to performed welding using tig and arc in high quality pipe spool from the colum vessel,boiler
full welding of butt joint with diameter of 2”-42” with schedule of 40-80 along the pipe rack with 100% radio graphic test
Training/seminar:
Company:Sonamet industrial S.A.R.L
Topic/course:confine space
Address:Lobito angola africa
Date:nov 11,2013
Company:Sonamet Industrial S.A.R.L
Topic/course:work at hieght
Address: Lobito angola africa
Date:march 13,2013
Company:EEI Corporation
Topic/course: Total Quality Management
Address:imus cavite Philippine
Date:Augustus 10,1994
Company:EEI Corporation
Topic/course:welding course gtaw/smaw
Address:imus cavite philippine
Educational background.
Grade school:Maybunga Elementary School Pasig
Date:1977-1983
High school: Rizal High School Pasig
Date:1983-1987
Personal background.
Nick name:Edwin
Birth date/ April 15,1970
Age:47
Hieght:5’6
Civil status:Married
Religion:Roman catholic
Nationality:Filipino
Passport no:EB7856674
Expired:April 11,2018
Place issues:Manila Philippine
I hereby certify that the above information are true and correct to the best of my knowledge and belief
Eduardo T Velasco
Contact this candidate