Maintenance Technician

Location:

GJ, India

Posted:

July 04, 2017

Contact this candidate

Resume:

KALPESHKUMAR DAHYABHAI KHALASI

***, **** ******, ********,

PO – DUMAS, DI – SURAT,

GUJARAT, PIN – 395007, INDIA

MOB: +917*********, +919*********

EM@IL: **********@*****.***

Respected sir,

I would like to apply forSR. INSTRUMENT COMMISSIONING TECHNICIAN Position in your esteemed organization. I have worked in some of the leading companies in the oil and gas Industries. I was Involved in calibration, testing, Pre-commissioning Commissioning, start-up and normal operations maintenance special in field Instruments in various oil and gas plants in Abu-Dhabi, Oman, Qatar, Kuwait, Azerbaijan and India.

I have nearly 18 years of comprehensive experience in the field of process control Instrumentation. Relevant experience comprises rehabilitation and modernization of oil and gas facilities. Electrical and Instrumentation and control system predominantly in the field of oil and gas and in the power plants. Experience in the project activities from “concept” of the troubleshooting in the all areas.

I have worked with as a Sr. Instrument Technician in my previous companies. I am looking for another placement. Please find the below my CV for your kind review and consideration.

OBJECTIVE: To work with a firm my experience and extensive knowledge of Instrumentation and Controls and any other Industrial automation can be utilized with full confidence responding to you that can impress you. If I am given an opportunity to prove myself that I can suit to all most satisfaction of my superiors.

I am hoping for a positive response from you and I think you in anticipation your reply.

Yours Respectively,

KALPESHKUMAR D. KHALASI

MOB: +917*********, EM@IL: **********@*****.***

KALPESHKUMAR DAHYABHAI KHALASI

Juna Street, Vill: Bhimpore,

Post: Dumas, Dist: Surat,

Pin Code: 395007,

Gujarat State, India.

Mo. No.: +917*********, +919*********, Em@il: **********@*****.***

Sub:An application for the post ofSR. INSTRUMENT COMMISSIONING TECHNICIAN.

WORK SUMMARY

Skilled Instrumentation Specialist with more than 18 years of hands on experience I oil and gas Environment, Petrochemicals, Fertilizers and Power sector Development and Onshore, Offshore Projects.

CAPABILITIES INCLUDE

Electronic Equipment’s Utilization and Services

Instrument Application and Calibration

Work Planning and Man Power Control

Preparation of Technical Documents and As built Drawings

Implementation and Suggestions

ACADEMIC QUALIFICATION

H.S.C Passed with Science Stream – A Grade

Technical Certificate Course in Instrumentation from Industrial Training Institute Suart (2 years from 1989 to 1991)

Diploma Instrumentation and Control (3 years from 2003 to 2006), Authenticated by UAE Embassy

Diploma in Computer Application.

SPECIAL SKILL & STRENGTH

Experience in Configuration, Calibration Checks on new Foundation Field bus Transmitters and Control valves.

Scandura Pressure Calibration Instrument Operation and Services Scandura Portable Unit and System.

Acquired holder of Certificate for Permit to WorkSystem of British Petroleum practice and Complied with demanding requirement Safety, quality and HSE achievement.

Basic knowledge of Computer.

Understand and Interpret Construction Drawings for Field Instrument Installation Regarding to Impulse tubing, Cable Junction Boxes, Supports, Hook – Ups etc.

Understand and ability to read and Understanding Engineering Drawings such as P & IDs Loop Drawings, Single Line Diagrams, Relay Logic Diagrams, Ladder logic diagrams and block functional Diagrams.

EXTRA TRANING BY BRITISH PETROLIUM

Basic Offshore Safety Induction & Emergency Training (BOSIT)

Task and Specific Risk Assessment

Advance Safety Audit

Performing Authority

Permit to Work system (PTW)

Working at Height

RTC – 2

Manual Handling

H2s awareness and Breathing Apparatus

N2 and Helium leak test

PRESENT JOB : At Present I am working with British Petroleum Oman AS a Lead Instrument Commissioning Technician from Aug2016to continue

EMPLOYMENT HISTORY

Designation : Sr. Instrument Commissioning Technician

Duration : Dec 2014 to Aug 2016

Employer : M/s Mayu Instrumentation and Electrical Pvt. Ltd.

Client : ONGC Ltd. Surat Hazira, India

JOB DESCRIPTION

General Day to Day Installation, Calibration, pre loop checking, loop checking, pre commissioning, commissioning, functional checks, start-up and maintenance activities

Repairing and fault finding of pneumatic and electronic Microprocessor based field Instruments

Prepare loop folder and paper work as per schedule and sub system

Overhauling control valves, maintenance, lapping, replaced parts, leak test, hydro test and calibration and Installed.Servicing, Calibration, Loop checking, Trouble shooting and plant Functional testing, pre commissioning, commissioning and Start – Up activities of field and panel Instruments such as Electronics, pneumatics and microprocessor based Instruments,

Configuration, Calibration and trouble shooting of Rosemount, yew, Foxboro, ABB and Honeywell made smart series transmitters with Hart Communicators

Testing, servicing and checking of all kinds of solenoid valve (3 pots & 5 pots), ESP, Maxseal and Assco made

Testing of pressure, flow, temperature, level, limit switches and control valves fail safe action and relay such as pneumatics and Interposing

Installation and calibration of smart valve positioner

Installation and calibration of Guided wave radar type level transmitters, DCS Honeywell Experian PKS.

Designation : Sr. Instrument Commissioning Technician

Duration : April 2014 to August 2014

Employer : ENERFLEX Middle East LLc

Client : OOCEP Block 60 Gas processing project, Oman

JOB DESCRIPTION

Servicing, repairing and calibration of all kinds of master test equipment like pressure calibrators, temperature calibrators, dead weight testers, Unomates, fluke temperature source, decade Box, MA sources, MV sources, Hart communicators 275, 375, and 475, and Master gauges in the calibration shop.

Repairing, servicing and calibration of all kinds of Transmitters like (PT, LT, FT, and TT) also control valves and valve accessories like valve positioner, Volume busters, pneumatic relays, I/p, and SOVs. Calibration and repairing all kind of Switches ( FS, LS, TS, PS )also repairing and calibration of O2 Gas analyzer, NitrogenGas analyzer, PH meters, Conductivity analyzer, H2s Meters etc. in calibration lab and field.

Maintain and preparing of field calibration and workshop calibration reports,

Loop checking, Trouble shooting and plant Functional testing, pre commissioning, commissioning and Start – Up activities of field and panel Instruments such as Electronics, pneumatics and micro processor based Instruments,

Configuration, Calibration and trouble shooting of Rosemount, yew, Foxboro, ABB and Honeywell made smart series transmitters with Hart Communicators 475

Testing, servicing and checking of all kinds of solenoid valve (3 pots & 5 pots), ESP, Maxseal and Assco made

Testing of pressure, flow, temperature, level, limit switches and control valves fail safe action and relay such as pneumatics and Interposing

Installation and calibration of smart valve positioner

Installation and calibration of Guided wave radar type level transmitters, DCS Honeywell Experian PKS.

Designation : Sr. Instrument Commissioning Technician

Duration : March 2012 to August 2013

Employer : Brunel Energy and Al Sultan Oil and Gas Ltd.

Client : ADCO BTG Project, Habsan – 2, Oil & Gas field, Abu Dhabi

JOB DESCRIPTION

Repairing, servicing and calibration of all kinds of Transmitters like (PT, LT, FT, and TT) also control valves and valve accessories like valve positioner, Volume busters, pneumatic relays, I/p, and SOVs. Calibration and repairing all kind of Switches ( FS, LS, TS, PS ) also repairing and calibration of O2 Gas analyzer, Nitrogen Gas analyzer, PH meters, Conductivity analyzer, H2s Meters etc. in calibration lab and field.Maintain and preparing of field calibration and workshop calibration reports,

Carried out Day to Day Maintenance, Commissioning and annual shut down activities of process field Instruments and Process control system of ABB XA 800 DCS system.

Commissioned Production Wells, Water Injection wells, Water Injection Clusters, Remote Degassing Stations (RDS) and BAB Central Degassing station in Habsan 2 BTG oil and gas project.

Handling oil Manifolds, N2 package, Emergency Diesel Generator, Flair Ignition package and Different types of Process Control Instruments.

Designation : Sr. Instrument Commissioning Technician

Duration : June 2010 to April 2011

Employer : Spie Oil & Gas Inc.

Client : SBM Deep Panuke Encana Project, Abu Dhabi

JOB DESCRIPTION

Carried out Preventive Maintenance, Break down Maintenance, annual Maintenance and Commissioning activities of process control field Instruments and process control system of Siemens DCS system

Repair and maintenance of different types of packages and process control field Instruments and system.Repairing, servicing and calibration of all kinds of Transmitters like (PT, LT, FT, and TT) also control valves and valve accessories like valve positioner, Volume busters, pneumatic relays, I/p, and SOVs. Calibration and repairing all kind of Switches ( FS, LS, TS, PS ) also repairing and calibration of O2 Gas analyzer, Nitrogen Gas analyzer, PH meters, Conductivity analyzer, H2s Meters etc. in calibration lab and field.

Servicing, repairing and calibration of all kinds of master test equipment like pressure calibrators, temperature calibrators, dead weight testers, Unomate, fluke temperature source, decade Box, MA sources, MV sources, Hart communicators 275, 375, and 475, and Master gauges in the calibration shop.Maintain and preparing of field calibration and workshop calibration reports,

Designation : Sr. Instrument Commissioning Technician

Duration : September 2009 to March 2010

Employer : Honeywell through Qatar Kentz WLL.

Client : Pearl GTL Shell Project, Ras Laffan Industrial City, Doha Qatar

JOB DESCRIPTION

Involved in Pre Commissioning, Commissioning and Start – Up of new Honeywell EPKS process control system.

Configuration, Firmware upgrade and calibration checks on new foundation field bus process Instruments

Designation : Sr. Instrument CommissioningTechnician

Duration : April 2009 to August 2009

Employer : Eastern Bechtel Company Ltd.

Client : GASCO ASAB, at Abu Dhabi

JOB DESCRIPTION

Involved in Pre Commissioning, Commissioning and start – up of AGD – 2 Project of GASCO Asab site at Abu Dhabi.

Attend Tool Box meeting, distribution of job, Work according to Permit to Work system in time limit.

Handling loop checking, Pre Commissioning, Commissioning and start – up activitiesRepairing, servicing and calibration of all kinds of Transmitters like (PT, LT, FT, and TT) also control valves and valve accessories like valve positioner, Volume busters, pneumatic relays, I/p, and SOVs. Calibration and repairing all kind of Switches ( FS, LS, TS, PS ) also repairing and calibration of O2 Gas analyzer, Nitrogen Gas analyzer, PH meters, Conductivity analyzer, H2s Meters etc. in calibration lab and field.Maintain and preparing of field calibration and workshop calibration reports,

Designation : Sr. Instrument CommissioningTechnician

Duration : March 2005 to April 2008

Employer : Kentz Caspian Ltd. Baku Azerbaijan

Client : British Petroleum

JOB DESCRIPTION

General Day to Day preventive, Corrective and routine maintenance activities

Development of British Petroleum Projects CWP, PCWU and TPG 500 oil and gas Offshore platform in Baku, Azerbaijan

Involved in calibration of all kind of field Instruments such as Rosemount 3051C, 2088, 1151 smart transmitters using Hart Communicator 475, 375, 275. ABB – KENT Introl control valves, Biffi ON OFF and Motor Operated Valves.

Carried Out loop checking on ABB Advant 800 DCS System. Also checked F & G System Installation and calibration, loop checking and commissioning, performed Pre commissioning, commissioning and plant functional test.

Also engaged in start – up and maintenance activities

Designation : Sr. Instrument CommissioningTechnician

Duration : January 2001 to Jun 2003

Employer : C. C. I. C

Client : Qatar Chemical, Dukhan oil and Gas field, Doha Qatar

JOB DESCRIPTION

Servicing, Calibration, Loop checking, Trouble shooting and plant Functional testing, pre commissioning, commissioning and Start – Up activities of field and panel Instruments such as Electronics, pneumatics and microprocessor based Instruments,

Configuration, Calibration and trouble shooting of Rosemount, yew, Foxboro, ABB and Honeywell made smart series transmitters with Hart Communicators

Testing, servicing and checking of all kinds of solenoid valve (3 pots & 5 pots), ESP, Maxseal and Assco made

Testing of pressure, flow, temperature, level, limit switches and control valves fail safe action and relay such as pneumatics andInterposing

Installation and calibration of smart valve positioner

Installation and calibration of Guided wave radar type level transmitters, DCS Honeywell Experian PKS.

Designation : Instrument Maintenance Technician

Duration : 20/11/1999 to 01/12/2001

Employer : ATSCO, Kuwait

Client : K. N. P.C., Kuwait at Shuaiba Refinery

JOB DESCRIPTION

Day to Day maintenance activities in Shuaiba Refinery

During period Routine, Corrective, break down and annually maintenance activities

Involved in calibration of all kind of field Instruments such as Rosemount 3051C, 2088, smart family transmitters by using HART-275 and HART-375 Communicators, Fisher control valves, Different kind of switches, and testing of Neles On/Off valves.

Carried out fault find, Repairing and Overhauling of Different types of field Instruments

Carried out loop checking, Commissioning, functional test, start-up and maintenance activities

Designation : Instrument Maintenance Technician

Duration : 12/02/1997 to 05/06/1999

Employer : IMCO, Kuwait

Client : Ministry and Electricity and water Al Zour power plant at Kuwait

JOB DESCRIPTION

General Day to Day maintenance activities in field areas

During period corrective maintenance, break down maintenance, annually maintenance and routine checks and maintenance

Involved in Inspection of newly Installed field Instruments as per standards and classification of Hazardous zones

Perform loop checking, Includes fault Diagnostics & Rectification

Hands on Experience in Bentley Nevada Vibration system (3300 & 3500 series)

Perform plant Operation functional test on Honeywell (TDC-3000) DCS system

Checked calibration, maintenance and replaced parts of Different types of fire and Gas Instruments

Designation : Instrument Commissioning Technician

Duration : 25/06/1995 to 10/02/1997

Employer : M/s TICB Ltd.

Client : Reliance Industries Ltd., Hazira, Suart, Gujarat, India

JOB DESCRIPTION

General Day to Day Installation, Calibration, pre loop checking, loop checking, pre commissioning, commissioning, functional checks, start-up and maintenance activities

Repairing and fault finding of pneumatic and electronic Microprocessor based field Instruments

Prepare loop folder and paper work as per schedule and sub system

Overhauling control valves, maintenance, lapping, replaced parts, leak test, hydro test and calibration and Installed.

Designation : InstrumentMaiintenance Technician

Duration : 01/08/1991 to 31/08/1994

Employer : International Engineering & Marine works

Client : ONGC Gas processing complex Hazira, Suart, Gujarat, India

JOB DESCRIPTION

General day to day corrective maintenance, routine checks and repair, replaced and calibration activities

Maintenance, overhauling, repairing, fault finding, trouble shooting and replaced all kinds of electronics and pneumatic process control Instruments

Repairing and replaced parts of control valves, Transmitters, switches, T/C, RTDs

Modification of control wiring panel as per required

Designation : Instrument Commissioning Technician

Duration : 02/09/1994 to 20/06/1995

Employer : ICB LTD.

Client : Supreme Petrochemical LTD. Maharashtra, India

JOB DESCRIPTION

General Day to Day Installation, Calibration, pre loop checking, loop checking, pre commissioning, commissioning, functional checks, start-up and maintenance activities

Repairing and fault finding of pneumatic and electronic Microprocessor based field Instruments

Prepare loop folder and paper work as per schedule and sub system

Overhauling control valves, maintenance, lapping, replaced parts, leak test, hydro test and calibration and Installed.

DUTIES AND RESPONSIBILITIES

Offering over 18 years of wide and Intensive working experience from different field in Instrumentation, witnessing the final Loop and Instrument testing & Commissioning and Maintenance.Mainly Involved in Oil & Gas industries & Petrochemical Industries. Duties performed include quality assurance in the implementation of quality system packages for the construction and maintenance works in accordance with the project contractor documents through inspection, surveillance and preparation of quality system procedure in compliance with project requirements. Review of construction plot plan drawing and project specifications.

Quality monitoring ensure that Instrument Installation.

Responsible for planning and supervising the installation, maintenance, repair, test and calibration of a wide variety of Electronic and pneumatic instruments, systems and analyzers. Additional responsibilities will include but are not limited to:

Planning day to day Commissioning and maintenance of control equipment.Schedule and assign Commissioning and maintenance tasks. Supervise all work on plant instrumentation & control systems. Supervise work on plat safety systems, field Instruments, valves & well head control system, RTU, RDS and CDS Commissioning, preventative maintenance, corrective maintenance and shutdown activities. Troubleshoot of complex & more routine faults. Uphold company HSE standards. Ensure work orders and check lists are completed. Plan, supervise & execute of major equipment/plant turnarounds & shutdowns. Supervise activities of assigned personnel.Worked with computer maintenance and materials systems (CMMS).

Also involved in SAT procedure. It is assumed that the following Pre-commissioning / Commissioning and Inspection test have already been conducted and signed-off by the customer during the earlier phases of the project.

Cable Trunking Inspection report

Panel and Termination Inspection Report

Cabling Inspection and Test report

Impulse Pipe Inspection and test report

Instrument Calibration report

Loop check report - Analog

Loop check report – Digital

As mentioned earlier SAT test for RTU and SCADA system is not done in isolation. This activity is to be closely coordinated with Mechanical, Electrical and other contractors so that all inputs, signal processing, logics and corresponding outputs can be tested for the desired plant operation philosophy.

Experience works that Includes Inspection, Installation, Calibration, Loop checking, Functional test, Pre-commissioning, Commissioning and Maintenance activities, Trouble shooting and Repair.

I have capability include like electronic equipment utilization and service work planning and manpower control, preparation of technical document& suggestions Instrumentation in Oil and Gas field, Gas refinery and Petrochemical projects, dealing with Inspection, Installation, Calibration, Construction, testing, Pre-commissioning and Commissioning of pneumatic, electronic, electro-pneumatic, Optical, Ultrasonicand Smart type process Instruments and Fire & Gas Instruments like smoke detectors, H2s detectors, combustible gas detectors, flame detectors, fire water system, open path detectors, fusible plugs etc.

Instruments maintenance of the process units and Fire & Gas Instruments, Loop checks and commissioning of all kind of field Instruments, Experience with calibration and functional checks of all types of smart instruments, sensors and final control elements, Testing and commissioning of logic and Interlocks, Field modifications, fault diagnosis and trouble shooting, Well conversant with process flow diagrams and P & IDS, Monitoring the job execution with QA and QC, Erection, pre commissioning and commissioning activities, Instrument Data Sheets verification, Interpretation of loop drawing, Instrument cabling and termination, cable schedule, hook up drawing and P & IDS, Extensive trouble shooting experience for all kinds of field Instruments during loop checks, commissioning and start up activities, Generate and maintain all types of process and Fire & Gas Instruments for quality control checks, Including calibration, leak checks and other Inspection, Punch list create and clearance, Day to day activities ( job description, safety talk, permit authorization etc ) with CCR persons, List of control system handled, Familiar with foundation field bus system, Machine monitoring system of Bentley Nevada 3500 series, Rolls Royse, Man turbo, GE package in seal gas system and machine monitoring system.

Instrument Worked on

Micro process control system, Honey Well TDC 2000, TDC 3000 EPKS, ABB XA 800 systems,

Smart Transmitters electronics and pneumatic like Rosemount, Foxboro, Yokogawa, ABB, Honey Well.

On-off valves, control valves with digital (HART) valve positioner of Fisher DVC 6010, 6020, & 6030, Siemens, Neles James bury ND 800/900, Valtake, Masoneilan SVI, ABB Introl and MOV’s of Biffi and Rotork

Level troll (Displacement Transmitter) of Magnetrol, Masoneilan and Fisher with Hart ability.

Switches like pressure, Flow, Temperature and Level of ASCO, Ashcroft, SOR, Switzer, Magnetrol and Andress+Housser.

Personal Details

Full Name : KALPESHKUMAR DAHYABHAI KHALASI

Date of Birth : 18th July 1972

Permanent Address : 482, Juna Street, Bhimpore, post: Dumas

Dist: Surat, pin code: 395007, Gujarat, India

Em@il : **********@*****.***

Passport No. : Z2232515

Date & Place of Issue : 20/08/2013 at Surat

Date of Expire : 19/08/2023

Immigration Status : Immigration Clearance Not Required

Skype : kalpeshsrt

Notice Period : Not Required

Computer knowledge

MS WORD

MS EXCEL

POWER POINT

Contact this candidate