Rotating Equipment Engineer

Availability

: Open for discussion

RODERICK C. CASTILLO

Home Address:

*** ****** **, ******, ******, Philippines 4102

Phone Number: 63-46-472-**** * 63-915*******

ac03fz@r.postjobfree.com or ac03fz@r.postjobfree.com

Nickname

: Jojo

Citizenship

: Filipino

Civil Status

: Single

Sex

: Male

Religion

: Born Again Christian

Height

: 5’4”

Date of Birth

: October 13, 1975

Birth Place

: Bacoor, Cavite

Experience Summary:

a rotating equipment engineer having 15 years of experience in design & selection, FEED work, detail engineering, feasibility and conceptual studies for rotating equipment.

EDUCATION:

Bachelor of Science in MECHANICAL ENGINEERING

MAPUA INSTITUTE OF TECHNOLOGY (MIT)

Muralla St., Intramuros, Manila, Philippines

1992 ~ 1997

7th Place among Mechanical Engineering Graduating Class ‘97

Passed in Board of Mechanical Engineering Licensure Examination given by Professional Regulatory Commission of the Philippines (PRC) last Oct. 11~13, 1997

WORK EXPERIENCES:

SENIOR ROTATING EQUIPMENT ENGINEER

GS EAST ASIA MANILA, INC.

Muntinlupa, Philippines

January 2015 ~ February 2017

Objective:

To provide support for the Proposal, Conceptual (Feasibility), Detailed Engineering Works of Rotating Machineries.

Duties & Responsibilities and Rotating Machinery Handled:

Team Leader for Proposal TAP Project, UAE, 2015

Team Leader for Proposal DUQM Project, Oman, 2016

EQUIPMENT (ROTATING) ENGINEER

MITSUI ENGINEERING & SHIPBUILDING CO., LTD.

Chiba, Japan

December 2013 ~ November 2014

Objective:

To provide support for the Detailed Engineering Works of API, ANSI, Cooling Tower and High Viscosity PUMPS for the AuroraEOS Project of Exxon Mobil.

Duties & Responsibilities and Rotating Machinery Handled:

Provides and checks deliverables

Handled also the following: OH1, OH2, BB2, BB3 & VS1

SENIOR ROTATING EQUIPMENT ENGINEER

TECHNIP KL

July 2012 ~ June 2013

Objective:

To provide support for the Detailed Engineering Works of various Rotating Machineries for the FPSO of Ichthys Gas Field Development Project.

Duties & Responsibilities and Rotating Machinery Handled:

Provides and checks deliverables

Provides training to Rotating Equipment Engineer (REE)

Provides assistance to Lead Rotating Equipment Engineer (LREE) on technical aspect

Handled also the following: OH2, OH3, BB1, BB2

ROTATING EQUIPMENT ENGINEER

DAEWOO ENGINEERING & CONSTRUCTION CORPORATION

Seoul, South Korea

January 2011 ~ January 2012

Objective:

To provide support for preparing Technical Proposal and Detailed Engineering Works of various Rotating Machineries for Oil Refineries, and Petrochemical per Client’s Specifications and Standards.

Duties & Responsibilities and Rotating Machinery Handled:

Provides support for the TBE and Detail Engineering for Gas Turbine (Two-Shaft) – Centrifugal Compressor (GTC) and Gas Turbine (Single Shaft) - Generator (GTG) Packages for CPF Otumara Node Domgas Project by SPDC, Nigeria

Provides support for the preparation of Technical ProposalNote 1 for Hout Associated Gas Facilities by Al Khafji Joint Operations (KJO). Equipment Handled: Sale Gas Compressors (Two Shaft Gas Turbine – Centrifugal Compressor), LP & HP Gas Compressors (Screw Type) and Flare Package.

Provides support for the preparation of Technical ProposalNote 1 for Ras Tanura Integrated Project (RTIP) Project by Saudi Aramco and DOW Chemicals. Equipment Handled: Ethylene BOG Compressor, Ethylene Booster Compressor and Propylene BOG Compressor (All are Non-Lube Horizontal Reciprocating Type).

Provides support for the preparation of Technical Proposal for Senoro Gas Development Project by MEDCO E&P and TOMORI Sulawesi, Indonesia. Equipment Handled: Gas Turbine Generator (GTG), Steam Turbine Generator (STG), Air Compressor and Dryer Package, Flare Package.

Acts as a mentor to engineer to be more familiar in rotating machinery.

Note 1: Prepares RFQ, Checks & Reviews Vendor’s Proposal and Prepares TBE.

ROTATING EQUIPMENT ENGINEER

GS ENGINEERING & CONSTRUCTION CORPORATION

Seoul, South Korea

March 2010 ~ August 2010

Objective:

To provide support for the Detailed Engineering Works for Package 2 of Al Ruwais Refinery Expansion Project, UAE.

Duties & Responsibilities and Rotating Machinery Handled:

Provides support for the Technical Evaluation of Recycle Gas Compressor (Two Stage Dry Screw Compressor)

Prepares Data Sheet for OCT Reactor Feed Treater Regeneration Blower Service (Single Stage Dry Screw Rotary Compressor). Provides also support for the Technical Evaluation of Vendor’s Proposal.

Provides support for the Technical Evaluation of Main Air Blower (Axial Flow Compressor driven by Steam Turbine).

Provides support for the Technical Evaluation of High Pressure Pumps (BB2 & BB5 Pump Types).

Provides support for the Technical Evaluation of the following Blowers:

oMain Gas Blower (Centrifugal Compressor driven by VFD HV Motor)

oDyer Blower (Centrifugal Compressor driven by VFD HV Motor)

Provides lecture to a junior engineer to be more familiar in rotating machinery.

SENIOR ROTATING EQUIPMENT ENGINEER

TOYO ENGINEERING COMPANY

Chiba, Japan

December 2007 ~ March 2009

Objective:

To provide suitable Rotating Equipment for the Conceptual Study, FEED Packages according to Client’s Requirements.

To support Detailed Engineering Works of various Rotating Machineries for Oil Refineries, and Petrochemical per Client’s Requirements.

Project Involvements:

FEED Data and Specifications of Rotating Equipment for RFCC Project of Cilacap Oil Refinery, Cilacap, Central Java, Indonesia. Involve also in the preparation of Technical and Commercial Proposal.

FEED Data of Rotating Equipment for RELP Project of PDVSA, El Palito, Venezuela

Technical and Commercial Assistance for the Conceptual Study including Life and Cycle Cost for LCO Unit, Idemetsu Koban (Domestic Project)

Technical Assistance for the Conceptual Study of 500 MTPD Methanol Plant, Veniran, Venzuela

Remaining Works of TEC for Vendor Document’s review of Ebara Elliot Compressors for Modernization Project of Petrobraz, Brazil

Technical Support for the scope of TEC in FPSO (Top Side), Angola Project

Others: Technical and Commercial Assistance for the Other Domestic Projects

Rotating Machineries Handled:

Centrifugal, Reciprocating (horizontal) and Screw Compressors

Blower, Steam Turbines, Refrigeration Unit (chiller)

API Pumps (OH2, OH3, OH6, BB1, BB2, BB3, BB5, VS1, VS4, VS6)

ANSI Pumps, Chemical Injection Unit, Agitator, Progressive Cavity, Metering

Fire and Jockey Pumps including Diesel Engine

SENIOR ROTATING EQUIPMENT ENGINEER

TOYO ENGINEERING COMPANY (ECOVAP – JV)

Sao Jose Dos Campos, Sao Paulo, Brazil

April 2007 ~ October 2007

Objective:

Support the Detailed Engineering Works of various Rotating Machineries for PETROBRAS REVAP MODERNIZATION PROJECT, Sao Paulo, Brazil.

Duties and Responsibilities:

Prepares Material Requisitions and Data Sheets of the Equipment.

Participates in the Technical Clarification Meeting and Kick Off Meeting with Vendors and Client before and after P.O.

Reviews and Evaluates Proposal for selecting the most competitive Vendor. Provides also Bid Tabulation Report.

Reviews and Checks Vendor Documents / Drawings against Material Requisitions, Customer Requirements, Project Specifications and Applicable Standards.

Interacts with the other Disciplines by means of internal correspondences, meeting regarding their Technical Requirements.

Reviews and Evaluates comments coming from the other Disciplines against the agreement with vendors during Kick-Off Meeting and Customer’s Requirements.

Reviews and Evaluates client’s comments on Vendor Documents / Drawings and Prepares necessary actions.

Reviews and Checks client’s P & ID against Vendor’s Proposal and Prepares Notification on P & ID Changes.

Interacts with Vendors and Clients thru Meeting, Electronic Correspondence, etc.

Involves in the execution of the following rotating machineries:

API Centrifugal Pumps (Horizontal, In-line and Double Suction BB2)

Steam Turbines

SPECIALIST ENGINEER (ROTATING MACHINERY)

Sumitomo Chemical Engineering Company, Ltd (SCEC)

Chiba, Japan

February 2006 ~ March 2007

Objective:

Support the Detailed Engineering Works of various Rotating Machineries and other Mechanical Equipment for Rabigh Development Project Package 1 of PetroRabigh Refining Company (Sumitomo Chemicals Inc. and Saudi Aramco Company), Saudi Arabia.

Duties and Responsibilities:

Participates in the technical clarification meeting with clients and vendor before and after issuance of P.O.

Reviews Final Material Requisitions of the equipment and traces the history of revision.

Reviews and evaluates proposal for selecting the most competitive vendor.

Participates in the pre-inspection meeting (PIM) held at the vendor’s shop for the outstanding technical design matters.

Reviews and checks vendor documents / drawings against material requisitions, customer requirements, project specifications and applicable standards.

Reviews and evaluates with the Lead Engineer about vendor’s recommendations or proposals which are based on their experiences or know-how against the requirements of customer.

Interacts with the other disciplines by means of internal correspondences, meeting regarding their technical requirements.

Reviews and evaluates comments coming from the other disciplines against the agreement with vendors during kick-off meeting and customer’s requirements.

Reviews and evaluates client’s comments on vendor documents / drawings and prepare necessary actions.

Interacts with clients and vendors thru meeting, correspondence.

Attends and witness the mechanical running test of the equipment.

Reviews and checks client’s P & ID against vendor’s proposal and prepares notification on P & ID changes.

Provides technical support with Process Discipline during HAZOP Meeting with clients.

Prepares Loading Data; reviews and checks Equipment List.

Involves in the execution of the following rotating machineries:

Recirculation Gas Centrifugal Compressors (single stage)

Recycle Gas Reciprocating Compressors (vertical, 3 stages)

Vertical and Horizontal Centrifugal API Pumps, Axial Flow, ASME and ISO Pumps

Chiller Units

Y-Cat Refrigerators

Agitators

Rotary Valves

Elevators

PROCESS DESIGN ENGINEER

PNOC-EDC (Philippine National Oil Company – Energy Development Corporation)

Fort Bonifacio, Taguig Metro Manila, Philippines

February 2004 ~ February 2006

Objective:

To plan and design piping and instrumentation diagram for the Fluid Collection and Re-injection System of Geothermal Projects; to prepare / conduct studies of how to optimize existing and future plants.

Duties and Responsibilities:

Prepares process flow diagrams for Geothermal Fluid Collection and Re-injection System (FCRS) or Geothermal Steam Field including conceptual design schemes.

Conducts system hydraulic analysis, heat loss analysis, pressure transient analysis, heat and mass balance calculations, pressure and velocity profiles to arrive at the optimum pipe sizes, insulation thickness, equipment sizes and determine proper pressure transient protection.

Tests equipment performance to ensure smooth plant operations and design improvement.

Coordinates with concerned sections or units on data requirements such as the civil piping and mechanical design of piping and instrumentation diagrams.

Reports on the status of projects and activities by writing regular reports.

Specifies process data required for the sizing of various equipment in the FCRS (Geothermal Steam Fields) such as pumps, separators and other pressure vessels, mufflers, silencers, relief valves, etc.

Checks actual installation ensuring piping design / lay-out conform to specifications based on the piping and instrumentation diagrams.

Participates in plant commissioning activities.

Evaluates technical data in bid documents and proposals.

Conducts R & D studies to improve existing and future geothermal plant performance.

Skills:

Knowledgeable on Excel Based Two Phase Hydraulic Simulation using Duckler and Beggs & Brill Correlation Methods

Knowledgeable on HYSYS PIPESYS Software 2004 ed.

Project Involvements:

Involved in the Commissioning of Production Pad 405 (40MW Pipeline) at Leyte Geothermal Production Field (LGPF), Leyte, Philippines

Conceptualized the Preliminary Design of the following:

oDauin Geothermal Production Field, Negros Oriental, Phil.

oRangas – Tanawon Geothermal Production Field, Sorsogon, Phil.

oMontelago Geothermal Project, Oriental Mindoro, Phil.

Involved in the Evaluation of Bidder’s Proposal for 40 MW Northern Negros Geothermal Power Plant Project, Negros Occidental, Philippines

Involved in the finalization of Bid Specification for 20 MW Pal-II Optimization Power Plant Project, Negros Oriental, Philippines

Provided Conceptual Design of the following Refurbishment Projects for BACMAN Geothermal Production Field, Sorsogon, Philippines:

oPal-5RD & Pal-6RD Re-injection Well Hook-up

oPal-23D Production Well Hook-up

oSteam and NCG (Non-Condensable Gases) Balancing Line

oPal-2D Production Well Hook-up

oPal-22D Production Well Hook-up

oPressure Drop Analysis from Well to Separator Vessel at BGPF II

ROTATING EQUIPMENT ENGINEER

JGC (Japan Gas Corporation) PHILIPPINES, INC.

Ayala, Alabang, Metro Manila, Philippines

January 1999 ~ May 2003

Objective:

Support the engineering works of various rotating machineries for oil refineries, and petrochemical plants in accordance costumer’s requirements and company standards.

Duties and Responsibilities:

Prepares data sheets, requisitions, auxiliary P & ID (Process & Instrument Diagram) and NPIC (Notification of P & ID Changes) related to the rotating machineries.

Prepares report on vendor’s bid technical evaluation.

Prepares equipment data summary sheet, electrical load information and anchor bolt list.

Reviews and checks vendor’s documents against customer’s requirements and company standards.

Interacts with clients and vendors through correspondences and meetings.

Skills:

Thru In-house technical training, well-versed with the following International Standards and Codes for Rotating Machineries:

oAPI 610 – Centrifugal Pumps

oAPI 611 – General Purpose Steam Turbine

oAPI 612 – Special Purpose Steam Turbine

oAPI 614 – Oil System for Special Purpose Applications

oAPI 617 – Centrifugal Compressors

oAPI 618 – Reciprocating Compressors

oAPI 619 – Rotary Type Positive Displacement Compressors

oAPI 673 – Special Purpose Centrifugal Fans

oAPI 674 – Positive Displacement Pumps (Reciprocating)

oAPI 675 – Positive Displacement Pumps (Controlled Volume)

oAPI 676 – Positive Displacement Pumps (Rotary)

oAPI 681 – Liquid Ring Vacuum Pumps and Compressors

oAPI 682 – Shaft Sealing Systems for Centrifugal and Rotary Pumps

oAPI 686 – Recommended Practices for Machinery Installation

oANSI B73.1M – Specification for Horizontal End Suction Centrifugal Pump

oANSI B73.2M – Specification for Vertical In-Line Centrifugal Pump

oISO 5199 – Technical Specification for Centrifugal Pumps

oNFPA 20 – Stationary Pumps for Fire Protection

Project Involvements:

Involved in the Detailed Engineering of Rotating Equipment for G1 Project (Asia Silicones Monomer, Ltd., Map Ta Phut, Thailand) – June 2002 ~ April 2003

Involved in the Entire K2U Project (Thai Polyacetal Co., Map Ta Phut, Thailand) – April 2001 ~ April 2003

Involved in the Entire BAPCO Kero Merox Project (Bahrain Petroleum Company, Bahrain) – January 2000 ~ December 2001

Involved in the Detailed Engineering of Rotating Equipment for CERRO NEGRO Project (Operadora, Cerro Negro S. A., Venezuela) – June ~ December 1999

Involved in the Detailed Engineering of Rotating Equipment for PARCO Project (Pak-Arab Refinery Limited, Mahmood Kot, Pakistan) – March ~ September 1999.

Contact this candidate