Engineer Manager

OMAR S. EL SAYED ATWA

Commissioning Manager/Engineering manager/Protection and Control Manager

Nationality Egyptian

Year of Birth 1965

Profession Electrical Engineer

Specialisation Power Stations and Substation construction, testing and

commissioning

Position in Group Commissioning Manager-GHD Consultant, Australia

Year of joining Group 2011

Mobile no. +201*********

E-Mail:

****************@*******.***

UK Resident

for 3 Years 2007-2010 Work Permit

In Australia

2012 for 6 Months 457 Visa

KEY QUALIFICATIONS

Skills in managing / maintaining building / site electrical systems;

electrical power, equipment and instrumentation; and energy management

experience

EDUCATION AND PROFESSIONAL STATUS

MSc in Digital Distance Protection, Cairo University Egypt, 1995

BSc in Electrical Power and Equipment, 1988

TP141 NG Authorisation Relay Setting Engineer in the UK, 2008 up to

May.2011

EDSA Software for Power System Load flow and protection coordination

ETAP POWER STATION 4.0

Project Management Professional Course

Clients I have approval and worked with :

-Egyptian Electricity Company

-Al Ezz factory for steel in Sewez Gulf in Egypt.

-GECOL Libia

-SEC EAST saudia

-SEC Central saudia

-SEC West Saudi -Generation

-Saudi Aramco Eastern Region

-Sabic Eastern Region

-DEWA Dubai UAE

-TRANSCO Abu Dhabi

-ADDC Abu Dhabi

-NATIONAL GRID United Kingdom-Central Allaince

-EDF United Kingdom

-PWC Australia

EXPERIENCE RECORD 24 years :

1-2012 up to Now Electrical Consulting work-freelancer-Egypt Cairo.

6.2012 Up to 11.2012 Substation Commissioning Manager-GHD Consultant-

Australia.

Manage Commissioning Activities at sites, prepare testing Plans,

Commissioning Schedules, Coordinate with stakeholders the testing

activities, tend commissioning panel meetings, 66kV Siemens GIS Testing

witnessing in behave of power Water Company Australia.

2011 Electrical Consulting work-freelancer-Egypt Cairo.

2011 ABB UAE, Site Commissioning Manager Supervise and manage

commissioning activities, MST, Commissioning Team at site ESCAN 33/11kV S/S

ADDC& FEWA Project 132/33/11 kV 5 Substations this include the followings:

-Manage a group of Sir-protection and commmissioning engineers about 20

engineers

-Prepare the Overall commissioning programe for substations To ADDC and

FEWA

-Prepare Three week commissioning schedule

-Follow all commissioning activities in Subsation and interface work with

all subcontractors. Including ABB GIS,ABB Protection Relays and ABB SCMS.

-Prepare Commissioning Method Staements as required for busbar Protection

Upgrading

-Manage the cost of manpower resources based on the project requirements .

2010 -2011 MOTT MACDONALD GROUP Senior Consultant Protection Engineer -

Transmission and Distribution Division, UAE Approved By TRANSCO and ADDC

- Commissioning Resident Engineer at Saadiyat Island following the

commissioning activities of

132/22 kV Substation Protection System -Siemens Busbar Protection

Type 7SS522/7SS523

Siemens Transformer Protection 7UT 513, 7SJ612, Feeder Line

Protection 7SD522 and other

Substation commissioning activities including GIS 132 kV, GIS 22

kV and 132/22kV

Transformers.

- Commissioning of Substation Control System Siemens-SICAM PAS-6MD9

- Commissioning of ABB Busbar Protection Type REB 500

2007 - 2009 ABB COMPANY, UK Commissioning Team Leader

- Commissioning activities for 400&275 KV substations including producing

test sheets for NG protection Such as RED670, REC561, P545

Relays in power system Division, Also Producing the relay setting

calculations for NG (TP 141 Relay setting Engineer Authorization).

- Assist the Commissioning Manager in the co-ordination and Management of

Company commissioning process (NICAP 2 project-West Burton AIS 400 KV

Project-South Manchester 275kv Alliance Project)

- Carry out fault level and protection setting-TP 141 Relay setting

Authorization include Nicap 2 Relay setting, West Burton EDF Busbar

Protection and Backup Directional relay for Generating units, South

Manchester 275/132 kV Mesh corners, SGT Protection, High Impedance

Busbar Protection Calculations. Up loading of Setting Sheets (MARS)

and Relay Configuration Files to NGT Live Link System.

- Produce NGT Thermal Rating Sheets, Protection DAR schedules.

- Produce NGT Switching Programmes.

2006 - 2007 GENERATION TECHNICAL SUPPORT SERVICES (GTS), Jeddah, KSA

Senior Protection Engineer

Provide Technical expertise to review, update & unify Protection

Maintenance procedures & standards across West Generation Region in Kingdom

of Saudi Arabia.

Review system disturbances & investigation all protection mis-operations.

Work with Area Protection Staff to review protection coordination issues;

provide training & guidance to all Protection Maintenance Staff.

Provide bi-weekly report to SEC Technical Service Manager; perform related

duties as assigned by the SEC Technical Service Manager.

The Job Include Generator, Step-Up Transformer Protections such As REG-216

From ABB also Multilin DGP and G60 from GE and Micom342 from Areva, 7UM61

from Siemens and other classical Static Relays from BBC Generator

Protection and induction type from GE. The Job includes the following Power

Stations in West of Saudi Arabia:

1- SHOAIBA POWER PLANT 7x393 MW.

2- Jeddah Power Plant GT units.

3- Rabigh Power Plant ST Units, GT units and CCST Units.

4- Madinah & yanbu Power Plants 6x205MW, 2x30MW, 3x45MW GT Units.

5- TABOUK Power Plant, GT Units.

2005 - 2006 DUBAI ELECTRICITY & WATER AUTHORITY, DEWA, Dubai, UAE

Senior Transmission and Maintenance Protection Engineer

Testing and supervision of Protective Relays of different types for

feeders, Transformers, Busbars 400kv and 132kv systems use the more recent

test equipments as Omicron, FRIJA 300.

Review system disturbances & investigation all protection mis-operations.

Work with Area Protection Staff to review protection coordination issues;

provide training & guidance to all Protection Maintenance Staff.

Provide bi-weekly report to DEWA Protection maintenance Manager; perform

related duties as assigned by the DEWA Protection maintenance Manager

2002 - 2004 TOSHIBA/MITSUI CO, Riyadh KSA

Senior Protection Coordinator

- Managed all drawings submission and approval with the customer SEC-CRB

and fully coordinated with subcontractors ABB Saudi and SST Company,

including all site activities supervision and remote end protection

modifications at 17 Remote Ends Substations.

- Provided technical negotiations with the customers, with full knowledge

of international standard of protection relays and customer

specifications.

- Followed up of protection relays commissioning for the main substation

and remote end substations.

2001 - 2002 SIEMENS, Egypt

Senior Protection/Commissioning Engineer

Commissioning Protection Engineer for PT, CT, Control Circuit, Tap change

control, power transformer testing, interface circuit for power transformer

220/33 kV in Al Ezz factory for steel in Sewez Gulf in Egypt.

Commissioning of distance relay Siemens make type 7SA513, Alstom make type

EPAC 220kV lines in Libya.

1999 - 2001 SIEMENS-WESTINGHOUSE, Dammam, Saudi Arabia

Senior Design Protection Engineer

- Project with SCECO-E (Saudi Arabia) for modification of protection

schemes of replacement of distance relays in 3 S/S and phase comparison

relay replacement with line differential relay type LFCB Alstom made.

- The project also covered distance relay settings, C.T and P.T sizing,

SCADA point list, SEC point list, Fault Recorder point list, Single

line diagram, relay and control line diagram; and testing and

commissioning of the protective relays.

1999 SIEMENS AG, Egypt

Site Manager

Malawi West S/S 220/66/33/11kV, Customer was E.E.A-Egypt. The scope of work

covered complete installation and testing of S/S.

1996 - 1998 CEGELEC, Egypt

Protection/Commissioning Engineer

Commissioning of Taba S/S 500/400/220/22kV (interconnection cable between

Egypt and Jordan) GEC Alstom Relays.

Commissioning of Luxor S/S 220/66/11kV GEC Alstom Relays.

1995 - 1996 ISCOSA (Siemens Westinghouse), Saudi Arabia

Protection/Commissioning Engineer

Covered the following job sites:

- 1996 King Saudi University S/S protective relays.

- Modification and installation of directional over current relays and

i.e. relays of 69kV grid station for SCECO-E in Saudi Arabia.

- Sept-Oct 1995 Commissioning relays of gas turbine generators for low

rate radar base, Panesma Co for Saudi Air Force.

- Jul - Sept 1995 Westinghouse Kuwait (Head Office in Orlando USA)

- Project for Sabah El Salam 'C' S/S GIS SF6 132/69/11 kV. Complete

testing and energization of S/S (Reyrole protections, GEC busbar

protection MBCZ 10).

-

1989 - 1995 EGYPTIAN ELECTRICITY AUTHORITY (EEA)

Protection/Commissioning Engineer Protection Maintenance Department

_ Cairo North I Combined Cycle Project (750 MW),

Including all Switchgears, MCC, GIS, Batteries, Unit

Transformers and Station Transformers, Scada Systems

_ Cairo West Thermal Power Plant 2x350 MW

including all Switchgears, MCC, GIS, Batteries, PS, Unit

Transformers and Station Transformers, Scada Systems

- Provided supervision, installation and commissioning of power stations

and substations protective relay and control systems.

- Basaten S/S extension third transformer 220/66/11 as representative of

E.E.A for testing and commissioning.

- Abu Zabal 500/220kV Mitsubishi made GEC relays.

- Bahtem S/S extension for the third transformer AEG made. Cairo North

- Provide Technical expertise to review, update & unify Protection

Maintenance procedures & standards across Cairo Electricity Zone in

Transmission system.

- Review system disturbances & investigation all protection mis-

operations.

- with Area Protection Staff to review protection coordination issues;

provide training & guidance to all Protection Maintenance Staff.

- Work with Technical Institutes to ensure Protection Trainees follow

latest standards & procedures

- Provide bi-weekly report to Protection Maintenance Manager; perform

related duties as assigned by the Protection Maintenance Manager.

- SUPPLEMENTARY INFORMATION

Courses:

- Course in Protective Relays by Jack Royals and Steve Pickering Alstom-

GEC 1994

- Course in Protective Relays 66/11 kV Substation and Busbar Protection

RADSS-ABB made by ELECTROIMPEX Co Sofia Bulgaria 1994

- Course in Protective Relays Cairo University Egypt 1994

- Avantis.pro training course for CMMS (Computerized Management

Maintenance System) for two weeks Jeddah Saudi Arabia 2006

- CDM training by SAFTY& RISK MANAGEMENT 14.9.2007

- Construction Design Management Regulation 20.3.2008

- Safety Rules Training by NG 29.3.2009

- Personal Training NGT EAK 17599 Energy Utility Skills Register EUSR ID

EUSR105474 up to 02 Apr 2011

- TP 141 Relay Setting Authorisation From 2008 Valid up to 2011

- A course in PCM600 2.3,RED 670,RET 670,REB500 ABB Sweeden at Dubai

From 24.4.2011 to 15.5.2011

- EDSA Software for Power System Load flow and protection coordination

- ETAP POWER STATION 4.0

- Project Management Professional Course

Related Skills, Achievements & Qualifications

Ability to test the following relays:

- Distance relays L8B ABB made RAZFE-ABB, RAZOA-ABB, LHY3-ABB, SD35C-AEG,

PD551-AEG, OPTIMHO-ALSTOM, MICROMHO-ALSTOM, REZ-1-ABB, Micom Relays

P442, Sel Relays, and 7SA513 Siemens Relays, 7SA522 Siemens.

- Over current relays MCGG22-ALSTOM, RACID-ABB, VIGRACK-G.SHNIDER, MCO-

ABB, Micom Series Areva, and ARGUS-1 REYROLE.

- Directional over current relays: MCGG22+METI 13 ALSTOM D.E.F. with PLC

Schemes ABB, 2DAP, ARGUS-2 REYROLE.

- Generator Protection: Loss of Field - ABB, Out of step-ABB, Reverse

Power BASLER U/O Frequency Relays - BASLER LPG111/Alstom Negative Phase

Protection - BASLER Power factor Protection BASLER O/C Protection MCO-

ABB, MX3IPG1A Areva, and 7UT512 Tr. Differential Prot SIEMENS, 7UT513

SIEMENS.

- Phase Comparison Relay: P10 Alstom, SOLKAR RF REYROLE, MBCI, LFCB103

GEC.

- Busbar Protection: MBCZ 10 Alstom B.B. Protection - AEG made, SIEMENS

B.B P Type 7SS522/7SS523, RADSS-ABB, TRANSFORMER DIFFERENTIAL RELAY

DUBIAS M.

- PLC Schemes Applied for Distance Protection Blocking and Tripping

Schemes.

- Fault Recorders: ENERTIC - FRANCE, HATHAWAY - USA.

- Troubleshooting of control circuits of Desil Generators and substations

control and interlocking of C.B. and D/S, E/S.

- Battery and Battery chargers simplex type (Floating and boost

charging).

- Goof knowledge about GIS SF6 maintenance gas filling machine DELO, Dew

Point, management, etc.

- Transformer testing up to 500kV, oil filtering machine (knowledge),

transformer oil test (breakdown test).

LANGUAGE CAPABILITY

Arabic: Mother tongue

English: Spoken - fluent, written - fluent, reading - fluent

German: Spoken - basic

Contact this candidate