Post Job Free
Sign in

Maintenance Crane Operator

Location:
Houston, TX, 77034
Posted:
June 25, 2013

Contact this candidate

Resume:

ANTHONY WILLIAMS

***** ********* ***** *****

apt# 1809

Houston, Texas 77034

832-***-****

********@*****.***

OBJECTIVE: I am a confident worker with experience in off shore drilling.

As an employee with your company, I will focus on accuracy, drilling, with

emphasis in safety. The quality and quantity of work productivity is of

great importance to me as detailed in my experience described below. It

also entails a picture of what I can offer your company. I will appreciate

an interview with you.

EDUCATION

Alief Hastings High School, Houston, TX 1994-1998; GED

EXPERIENCE:

Seadrill Houston,Tx 07/2012 - Present

Roustabout:

. Carry out cargo handling duties, housekeeping, maintenance and other

manual labor as instructed;

. Carry out lifting operation duties as directed;

. Maintain all equipment and perform housekeeping as instructed;

. Ensure all tools and equipment are stowed appropriately at the end of

each tour to avoid safety hazards for other operations;

. Assist in the maintenance of the crane, rig's machinery and equipment

using correct tools and following safety procedures;

. Provide assistance in the mixing of mud chemicals, pit / tank

cleaning, and pump room maintenance;

. Perform regular steel preparation and painting to maintain the unit;

. Assist in the care, protection, maintenance and preparation of

tubulars on the pipe deck;

. Carry out helideck duties as instructed;

. Ensure that approved rig operating procedures are adhered to at all

times. Report all unsafe activities, situations, and potential hazards

to supervisor;

. Actively participate in the Safety Management Systems;

. Perform all emergency duties as per designation on the station bill;

. Actively participate in safety, departmental, pre-tour, client

meetings, etc;

. Effectively use all safety and environmental tools employed by

Seadrill (4-point check, OBS cards, PTW etc.);

. Complete training requirements in a timely manner as per Seadrill

training matrix.

Floorhand:

. Operate drill floor equipment, handle tubulars and handling tools on

the rig floor for the purpose of supporting drilling

operations;Section 3 - Responsibilities

. Operate and perform first line maintenance on rig floor drilling

equipment;

. Maintain drilling equipment, tubulars, handling equipment etc as per

rig specific procedures;

. Examine all safety equipment on the rig floor prior to use ensuring

they are in safe operating condition;

. Actively participate in the Safety Management Systems;

. Inspect all tools and equipment prior to use ensuring they are in safe

operating condition;

. Maintain rig floor in a clean and tidy manner;

. Actively participate in well control drills as required;

. Make certain all loads leaving the rig floor with the crane are slung

/ rigged correctly and clean;

. Assist in maintaining and running the mud processing solids control

equipment;

. Perform regular steel preparation and painting to maintain rig floor

equipment and structure;

. Actively participate in all pre-job plans and meetings for drilling

operations;

. Obtain training to safely and competently operate hoisting devices for

equipment and personnel;

. Actively participate in weekly rig and departmental safety meetings;

. Provide assistance with deck operations as and when required;

. Ensure that approved rig operating procedures are adhered to at all

times. Report all unsafe activities, situations, and potential hazards

to supervisor;

. Assist in running and retrieving marine riser and BOP;

. Effectively use all safety and environmental tools employed by

Seadrill (4-point check, OBS cards, PTW etc.);

. Assist the Derrickman in mud mixing operations;

. Perform all emergency duties as per designation on the station bills;

. Complete training requirements in a timely manner as per Seadrill

training matrix

Ensco International Deepwater Drilling, Broussard, La 05/2010 - 07/2012

Roustabout, floorhand

. Operating and proper maintenance of Air/Hyd Hoist and Man Riders.

. Proper use of work baskets and personnel baskets.

. Proper use of Anti-fall devises, safety belts, SRL's

. Caring for and maintaining tubulars.

. Assisting with the handling of all tubulars on deck, Drill Pipe,

Casing, Production Tubing, Chrome Tubing, Drill Collars, etc.

. Mixing and storing of chemicals for drilling and completion fluids.

. Drifting and measuring of tubulars.

. Proper use of hand tools, chain tongs, pipe wrenches, sledge hammers,

etc.

. Proper use of air operated tools, Needle Gun, Buffers, Grinders,

Chippers, etc.

. Mopping, cleaning, scrubbing and painting Drilling equipment, Decks,

Cranes, Quarters, and equipment compartments.

. Assisting in loading and back loading of supply boats.

. Assisting in loading and back loading of helicopters

. Assisting in handling take on hoses.

. Assist Deck Forman and Crane Operators with the Lifting Gear Registry

and lifting gear change out.

. Assist in handling tubulars, down hole tools on Bucking Machine.

. Assist in cleaning of Confined Spaces, mud pits, P-Tanks, Shaker

Processing Pits.

. Assist in fire support during emergency operations.

. Assist when needed in the mud pump room when Derrickman/Pumpman is

repairing mud pumps.

. Assist when needed the Drill Crew on the rig floor during any

operations.

. Assist Drill Crew and Sub-Sea Engineers in the moon pool area during

BOP or Production tree operations.

. Assist in securing/binding cargo, tubulars, and equipment through out

the Ship/Rig.

Hercules Offshore Drilling, Houston, TX 07/08 - 1/09

Floorhand - Shakerhand

. Rig floor operations adhering to safety policies

. Involved in multi operations on rig floor under

supervision of A/D and Driller

. Making up and testing B.O.P

. Preparing and Skidding derrick for rig move

. Working on shakers and mud pumps

Operate tongs, wrenches and other equipment required for making up or

breaking out tubular - perform other tasks necessary to drill a well.

- Use manual and automated means to move, position, lift, pull, push,

remove, and install tubular and other equipment as needed to perform the

operation.

- Manually set and remove slips from the rotary bore and around tubular

as required.

- Wash down rig floor areas using high-pressure water, steam, air,

solvents, and cleaning chemicals as required.

- Actively participate in pre-job meeting with the drilling crew for all

non-routine drilling operations and safety matters.

- Ensure all loads leaving the rig floor with the crane are slung

properly and have tag lines attached.

- Signal Crane Operator in bringing equipment to and from the rig floor

in a safe and effective manner.

- Grease, lubricate, and perform minor repairs to rig floor equipment and

inspect machinery that are directly related to the drilling operation.

- Change tong and slip dies using hand tools and personal protective

equipment and ensure tools and equipment are in a safe operating

condition.

- Clean and service drilling subs and equipment before removing from rig

floor.

- Carry out regular painting to maintain rig floor equipment - prepare

metal surface for paint using scrapers, portable air operates tools, wire

brushes, et cetera.

- Assist in maintaining the shale shakers in optimum operating condition

and perform any required maintenance or minor repairs.

- Perform daily inspection and preventive maintenance on derrick

structure while using safe operating procedures and proper personal

protective equipment.

- Assist the Derrickhand in mud mixing operations and checking the

properties of drilling fluid.

- Assist with deck operations when required.

- Assist in nippling up or down the Blow Out Preventer (BOP) stack and in

running and retrieving risers and BOP.

- Relieve Derrickhand on shale shaker duty and derrick if required.

Rowan Companies, Houston, TX 05/04 - 06/08

Roustabout - Floorhand - Shakerhand

. Tripping

. N/up B.O.P, N/Down B.O.P

. Rigging up and running casing

. Running completions and Shaker hand duties

. Assisting service hands and adhering to safety policies

. Operate tongs, wrenches and other equipment required for making up or

breaking out tubular - perform other tasks necessary to drill a well.

- Use manual and automated means to move, position, lift, pull, push,

remove, and install tubular and other equipment as needed to perform the

operation.

- Manually set and remove slips from the rotary bore and around tubular

as required.

- Wash down rig floor areas using high-pressure water, steam, air,

solvents, and cleaning chemicals as required.

- Actively participate in pre-job meeting with the drilling crew for all

non-routine drilling operations and safety matters.

- Ensure all loads leaving the rig floor with the crane are slung

properly and have tag lines attached.

- Signal Crane Operator in bringing equipment to and from the rig floor

in a safe and effective manner.

- Grease, lubricate, and perform minor repairs to rig floor equipment and

inspect machinery that are directly related to the drilling operation.

- Change tong and slip dies using hand tools and personal protective

equipment and ensure tools and equipment are in a safe operating

condition.

- Clean and service drilling subs and equipment before removing from rig

floor.

- Carry out regular painting to maintain rig floor equipment - prepare

metal surface for paint using scrapers, portable air operates tools, wire

brushes, et cetera.

- Assist in maintaining the shale shakers in optimum operating condition

and perform any required maintenance or minor repairs.

- Perform daily inspection and preventive maintenance on derrick

structure while using safe operating procedures and proper personal

protective equipment.

- Assist the Derrickhand in mud mixing operations and checking the

properties of drilling fluid.

- Assist with deck operations when required.

- Assist in nippling up or down the Blow Out Preventer (BOP) stack and in

running and retrieving risers and BOP.

- Relieve Derrickhand on shale shaker duty and derrick if required.

Perform all duties assigned during deck/maintenance operations.

. Proceed safely, and correct or notify persons of any unsafe acts and/or

conditions.

. Attend pre-tour, post tour, and special operations and weekly safety

meetings.

. Rig maintenance such as chipping, scraping, painting, scrubbing, and

cleaning.

. Assist in keeping the deck free of all unnecessary tools and equipment.

. Relieve on the drill floor as required in order to gain experience for

promotion.

. Assist the Crane Operator with the loading and unloading of supplies.

. Flag Crane Operator during lifts, install tag lines to prevent accidents

or damage.

. Assist in maintaining the general appearance of the drilling rig.

. Keep the paint locker neat and orderly, ensure all containers are sealed,

and all combustible materials are properly stored.

. Be familiar with company paint specifications and procedures for use and

care.

. Participate in the development of newly appointed crew members.

. Participate in training both onshore and offshore.

. Assist the Helicopter Landing Officer during helideck operations.

. Assist the Welder as needed.

Certificates Include:

Floorhand Well Control Training, CPR, SafeGulf Training, IADC Rig Pass,

Passport, TWIC Card,Bosiet & Huet Training, Basic Fire Fighting, Rigger

Qualification, FRC Training, Advanced Fire Fighting, 2101 Intro, 2102 (HMI)



Contact this candidate