Quality Assurance Maintenance
Resume:
Clarence N. Batiste
Humble, Texas 77346
Cell:713-***-****
Email address:abya2p@r.postjobfree.com
abya2p@r.postjobfree.com
Energy International (Mar 12-Present)
Field Service Technician/Mechanic
Construct foundations for and to assemble, dismantle and overhaul
machinery and equipment, installing, maintaining, upgrading and
fabricating machinery and equipment according to layout plans,
blueprints, and other drawings in industrial establishment.
Energy package consisting of Solar Turbine Taurus50/ 60hz gearbox and
externals to provide power to wherever needed.
Performed external work and level 2 maintenance on turbines and energy
packages both diesel and natural gas, electrical work, package
installation/assembly, package breakdown, energy package prep for
shipment, test, and preventative maintenance,
performed unscheduled maintenance on package and troubleshooting,
generator maintenance and operational checks involving applying power
to generator, testing generator, performing pre op check, and overall
maintenance of generator.
Installed skid wiring,and Murphy AFR 64 PLC system on CAT and Waukesha
applications. Performed maintenance on Caterpillar and Waukesha,LPG
and Natural Gas Engines. Lockout tag out training, proper hazmat
disposal and cleanup procedures, forklift driver, and tool coordinator
Lockheed Martin (Aug 2011 Feb 2012 )
Senior Technical Trainer/Field Tech/Mechanic
. Provide classroom instructions and hands on training to Afghanistan
Air Force military personnel on Russia Mi 17/171 transport type
helicopters and Mi 35/ 24 attack type helicopters
. Assist in course development,provide hand on training on gas turbine
engines, electrical, gearbox, hydraulic systems the the use of
precision measuring tools.
. Performed major overhaul, reassembly, rigging, troubleshooting and
borescope inspections on gas turbine engine models, TV3-117MT and TV3-
117VM.
.Petroleum Helicopters Inc (Jul-2010 Feb- 2011)
Helicopter Technician
. Performed scheduled inspections and unscheduled maintenance on turbine
engines,electrical, hydraulic and main gearbox systems on Sikorsky
S76,S92 and Bell 407 helicopters
. .Performed major overhaul, reassembly,rigging, troubleshooting and
borescope inspections within Combustor/Compressor section of gas
turbine models, GE CT7-8A,Turbomeca Arriel 2S2 and Roll Royce/Allison
250-C47B
Arinc Taji Iraq (Mar 07-Apr 10)
MI-17/171 & UH-1H Huey II Phase Team Lead/Aircraft Mechanic
. Performed daily operational maintenance on bell helicopter UH-
1H/HueyII and Mi-17/171 aircraft in the country of Iraq.
. QC function to include, launch and recovery, preflight,component
removal and replacement of turbine engines, gearbox,
hydraulic,pnuematic and electrical systems; refuel/defuel and
maintenance actions required at operational or intermediate level
maintenance facilities.
. Provide training to Iraqi Air Force to ensure they are fully
qualified as maintenance technicians
. .Scope and perform broadly defined tasks that required the use of
independence, judgment and creativity. Provide technical guidance to
Iraqi Air Force and less experienced personnel.
performed complete overhaul, reassembly rigging, troubleshooting and
inspection of gas turbine engine model,Lycoming/Honeywell T53-701 and
Russia model TV3-117MT
Lockheed/DS2 Soto Cano Air Base Honduras (July 03-Mar 07)
UH-60 Blackhawk/CH-47 Aircraft Mechanic/Phase Team Lead
. Performed scheduled and unscheduled maintenance/inspection on army UH-
60/CH-47 helicopters with precision measuring instrument..
. Troubleshooting hydraulic system, flight controls, turbine
engines,pneumatic electrical,gearbox and rotor systems.
. Perfomed major overhaul, troubleshooting, rigging, disassembly of UH-
60/CH-47 Blackhawk helicopters for deployment reassembly helicopters
at arrival point.
. Performed offsite maintenance support due to aircraft system
malfunction or incident
Raytheon Aerospace Spring,Texas (Awarded U S Government Contract)
(1995 - 2003)
Aircraft Maintenance Supervisor
. 1Promoted to assume full responsibility for the entire ground support
facility to include a technical team of 25, all work scheduling,
purchasing and inventory control, quality assurance and safety
issues.
Functioned as "Off Site Consultant" to other Raytheon sites to
reorganize and streamline maintenance operations.
3Introduced a series of maintenance procedures that significantly
reduced work redundancy while improving inventory integrity.
4Certified and remained accountable for corporate office status
reporting.
Chief Quality Assurance Inspector
1Promoted to manage a team of 15 technicians while overseeing the
entire quality assurance program.
2Wrote and developed repair station manual.
3Directed, planned and authorized inspection standards, methods and
procedures in accordance with Military and FAA regulations.
4Troubleshot electrical, electronic, pneumatic, hydraulic, turbine
engines,drivetrain,flight control and main/tail rotor systems on (2)
UH-60 (2) BELL 206 (2) AS350B2,(3)CESSNA CITATION and (2) KING AIR
200/C12.Performed complete overhaul and
reassembly,rigging,troubleshooting and borescope inspections on gas
turbine models,GE T-700, Roll Royce Allison C20,Roll Royce Allison
C20F,Pratt & Whitney TurboFan JT15-4 and Pratt & Whitney PT6-42 & 62
. E-System Inc. Spring,Texas (Awarded U.S.Customs
Contract) (1986 - 1995)
Quality Assurance Inspector/Aircraft Technician
Ensured maintenance was performed according to manufacturer and
technical specifications.
Developed and implemented a highly effective OJT program.
Managed tool and supply inventory, and ensured tools were properly
calibrated.
Ensured compliance with MILITARY, FAA, EPA and OSHA regulations.
Inspected aircraft to ensure all flight operating standards were met
Ensured forms and records were appropriate for aircraft maintenance
procedures
Assisted in troubleshooting mechanical and technical issues on
Blackhawk UH-60,BELL 206 Bell AH-1G, Bell UH-1M,EurocopterAS350B2
helicopters..
Inspected precision tools for proper certification and
condition.
Monitored engine trend,borescope inspection and oil analysis program.
..
Accolades:
1. U .S. Army Helicopter Mechanic/Crewchief Honorable Discharged
2. University of Alaska, Aviation Technology
3. Tanana Valley College, Two-year Aircraft Mechanic Technical
Program, Fairbanks, Alaska
4. FAA Licensed Certificated Aircraft Mechanic(A & P)
5. 10-Hour OSHA Hazard Training
6. MS Word/Excel/Powerpoint/Outlook
Contact this candidate