Mechanical Engineer

Fabian D. Trujillo

P.O. Box *** Chimayo, NM *****

(Cell) 505-***-****

Senior Mechanical Designer

Accomplished, experienced, Senior Mechanical Designer, with a solid

background in design and detail for products, in the Nuclear Weapons

industry, for the Department of Energy with 30,000 hours of

PRO/Engineer experience and 4,000 hours of Creo 2.0. Significant

abilities I bring to a work environment are great communication and

people skills and proven success when interfacing with both customers

and co-workers on a daily basis, which include tight and strict deadlines.

I accept the mentor role and also work extremely well with people of

diverse personalities.

Professional Experience

COMPA Inc. (Los Alamos National Security, Los Alamos NM) 2010-

Present

Engineering Technologist 1

• Designed the confinement for the Non Destructive Laser Gas

Sampling being used at Y12 in Oak Ridge Tennessee.

• Performed the design and detail of Confinement Vessel Entry and

Exit doors used at the LANS DHART facility.

• Focused on the design and construction of a small powerful

actuator for a throwable jumping robot. Made extensive use of

PRO/E software, rapid prototyping, and wire EDM to construct a

complex miniature spring loaded linear actuator.

Sandia National Laboratory (Albuquerque NM 871**-****-****

Principal Technologist

• Utilized PDMLink 9.0 and WildFire 4.0, to perform migration of

assemblies and drawings from Intralink.

Created a new method in developing a paperless way of checking

•

drawings and store in them in iteration history in PDMLink 9.0.

Designed and Detailed satellite components and released drawings

•

using the IMS system. I mainly dealt with customers who had me

making changes daily to the RF-Tray and Optic assemblies and

Decryption assemblies.

Lead designer developing components for the W88-AF&F. Work

•

consisted of designing a new Terminal Protection Device.

Performed changes to W76-1 MK4A-JTA, mainly design changes

•

and GD&T modifications.

LANS (Los Alamos National Security, Los Alamos NM) 2008-

2009

Designer Tech 5

• Designed detonators for weapons components used in test at

Detonation Assembly facility.

• Performed the design and detail of 1E33 and 1E38 weapon

components and assemblies.

• All design and filing of models and drawings were done in

conjunction with Wildfire and PDM/Link 9.0.

ORNL (Oak Ridge National Laboratory, Oak Ridge, TN) Spallation

Neutron Source 2007-2008:

Senior Mechanical Designer

• Performed critical designs to beam line assemblies used in the

Helicon Physics experiment.

Responsible for the design of mirror mounts used in neutron

•

scattering LEBT (Low Energy Beam Transfer).

Carried out heavy deadline of numerous designs for completion of

•

Hot Cell drawings in target area.

LANS (Los Alamos National Security, Los Alamos NM) 2004-2007:

Designer Tech 5

• Designed detonators for weapons components used in test at

DARHT facility.

• Performed the design and detail of W88 and W76 weapon

components and assemblies.

• All design and filing of models and drawings were done in

conjunction with Wildfire and PDM/Link.

SAIC (Science Applications International Corporation, Los Alamos,

NM) 2002-2004:

Senior Designer

• Responsible for the design and fabrication of all PMP (Pit

Manufacturing Process) fixtures.

Performed Inspection data graphs and comparisons between spline

•

and nominal masses on all PIT shells, using a sophisticated

software developed internally within the group.

Acted as shop liaison for all components that were being fabricated

•

within, our in house machine shop and all the parts that were being

fabricated out of laboratory.

Merrick & Company (Los Alamos, NM) 02/2001 – 3/2002:

Senior Designer

• Designed and detailed numerous Glove Boxes, for Savannah River

Site National Laboratory.

• Prepared drawings Using Pro/E Piping for generating P&ID’s at a

weapon’s facility in Los Alamos, NM.

Coherent Technologies (Boulder, Colorado 80303) 08/2000-01/2001:

Mechanical Designer

• Developed multiple mechanical engineering concepts for CAT

project, which were then utilized on B720 aircraft to determine

wind patterns in the atmosphere. CAT= (Circular Air Turbulence)

detection device.

Generated various ASME Y14.5M drawing layouts on Pro/E

•

2000i, for production of all parts that were released for

manufacturing at local and exterior machine shops.

Designed numerous components using Pro/E Cabling & Harness

•

module, for electrical harness projects and devices used in CTI

LIDAR experiments.

Los Alamos National Laboratory (Los Alamos, NM 87545)

05/1999-08/2000:

Mechanical Designer Tech 3

• Provided mechanical design support for the fabrication of all the

components and piece parts used to in all testing in Physics lab.

• Performed numerous installation of hardware for a variety of

division projects. Projects that I generated on Mechanical Desktop

3.0, were optical telescopes, gated x-ray imagers, neutron detectors

and laser diagnostics, all work obtained ASME Y14.5M-1994

Standards.

• Engineered and designed the development of piece parts used in

critical laser experiments, which involved University of Rochester

Omega laser facility.

Butler Service Group (Los Alamos, NM 87545) 11/1997-05/1999:

Designer/Drafter

• Supported a group of weapon engineers with my design

capabilities to achieve an award for safety design on a hot and

critical classified task that met its deadline.

Spearheaded the tooling responsibilities, on a project with various

•

laboratories that consisted of creating 3-D models for a

dismantlement project.

Designed several storage containers for classified assemblies that

•

were used at several DOE laboratories.

Johnson Controls Inc. (Los Alamos, NM 87544) 07/1996-11/1997:

As-built Technician

• Drafted as-builts for various government structures at LANL. The

importance of the as-built's was to provide the customer with well

defined quality product of the building and it was easier to pinpoint

certain areas and it's functions.

• Performed duties such as, drafting the Interior Brass Intrusion

Detection System for the Security and Safeguards section at

LANL.

Taxation and Revenue Dept. (St. Francis Drive Santa Fe, N.M.

87505)

(07/1993-07/1994):

Summer Internship

• Incorporated tax information using spreadsheets into a computing

system generated by the department.

• Demonstrated proper methods, to sorting out tax forms and

configuring the penalties for invalid tax information.

New Mexico Highway Department ( Santa Fe, NM 87505) (1992-

1993):

Student Internship

• Helped with the designs of bridge structures, and configured the

stresses of each support and water flow formulas.

Calculated significant data that was implemented into the upgrades

•

of bridge designs throughout the state using topographic maps.

New Mexico Motor Vehicle Division (Santa Fe, NM 87505) (1991-

1992):

Student Internship

• Incorporated penalty fees into database, using Excel

(spreadsheets).

Issued out license plates to the handicapped and senior citizens as a

•

desk clerk.

Software:

CREO 2.0/PDMLink 10.0

•

PDMLink 9.0/WildFire 4.0 Pro/Engineer

•

Windchill PDM/Link 8.0, Pro/Intralink,

•

Pro/E Cabling & Harness, Pro/E Piping

•

AutoCAD Mechanical Desktop 3.0, AutoCAD R.13, 14, 2000 and

•

2007

Microsoft Word Professional

•

Geographical Information Systems (Arcview, ArCAD)

•

Land Survey (Eagle Point)

•

Education:

Northern New Mexico Community College (08/1994-05/1996):

• Graduated with high honors and earned an Associates of Applied

Science (AAS).

• Degree: Drafting Engineering Technology (3.69 GPA).

References: Available upon request.

Contact this candidate