Engineer Project Manager

Damian Peter Rampersad

Address: No. *, *th street West, De Lamarre Avenue, Trincity, Trinidad and

Tobago

Mobile: +1-868-***-****

Skype: damian_rampersad

Email: *******@*****.***

Marital Status: Single

[pic]

Summary of Drilling Engineering and Supervision Experience:

Slant Drilling Rig (4yrs)

. Skytop Scorpion Brewster slant Drilling/Workover rig

. Service King slant Drilling rig

Jack Up Drilling Rig (9yrs)

. Transocean Constellation - Well Site Engineer

. Transocean Monitor - Operations and Well Site Engineer

. Rowan Gorilla 3 - Operations, Well Site Engineer and Day Supervisor

Drilling Supervision

. Development oil and gas wells

. Exploration oil wells up to 25,500ft

. High Pressure wells, Mud weight > 18.0 ppg

. High Temperature wells, Temperature > 300 F

. Extended reach and near horizontal wells up to 78,

. Re-drilled wells with surface inclinations ranging from 25 to 35

Completion and Workover Engineering Experience

. Completions: -

o Open and Cased hole gravel pack

o TCP and Completion Perforating Applications

o Stand alone and pre packed screens

o Premium mesh

o Barefoot

. Repair and Recompletions

. Design and installation of HDESP, ESP, Hydraulic and PCP artificial

lift

Engineering Experience:

February 2013 - Present Trinity Exploration

and Production PLC (Take over of Bayfield Energy)

Senior Drilling Engineer - (West Coast Offshore and Onshore Operations)

> HSE, Systems and Policy

. Participate and provide leadership in Management of HSE in order to

achieve a sustainable and continuous improvement in HSE performance at

the well site

. Ensure safe work practices and demonstrate equipment provided for

health and safety purposes in accordance with the Company's safety

policies

. Participate in Incident investigations and Root Cause Analysis

investigations

> Planning, Engineering & Operations

. Prepare budgetary cost estimates for Drilling & Completions operations

. Prepare detailed cost estimates for Drilling & Completions operations

. To work with a Multi-Disciplined team in the planning and execution of

drilling wells

. Generate and compile regulatory documents for well approvals

. Coordinate activities for well location preparation

. Provide guidance on detailed equipment specifications for long lead

planning and individual wells

. Ensure engineering and planning is performed in a structured manner

. Monitor Drilling &Completions operations and provide technical and

engineering support to well operations

. Promote Management of Change and associated Risk management Systems

for D&C operations

. Provide commercial and technical information as required for Joint

Venture partners

. Review drilling equipment suitability and performance for Drilling &

Completions operations

. Ensure that well plan is executed effectively and ensure learnings are

implemented moving forward

. Responsible for various Land blocks - WD2/WD5/6

. Train and mentor Junior Engineers

> Contractor Management

. Provide support to Drilling Team and Procurement department for

creation of Tenders and Contracts for Drilling & Completions

operations

. Recommend contracting strategies for selected services

. Participate in the Technical tender evaluations for selected services

. Monitor contractors, ensuring that HSE and Contractor Management

standards are maintained

May 2009 - February 2013

Bayfield Energy (Galeota) Ltd

Senior Drilling Engineer - (Drilling & Workovers, Structural Engineering,

Field Development, Maintenance & Reliability, Projects)

> Drilling and Completions

. Develop Drilling and Workover programs for platform re-drills (mature

field) and Exploration wells

. Prepare and submit all Government and Environmental documentation

required for clearance to perform sidetracks and future exploration

wells

. Manage Exploration and Development budgets and projects

. Prepare basis of design for seven exploration wells from 6,500ft to

18,000 ft TVD

. Perform all necessary Engineering calculations for Drilling Programs

. Prepare AFE's for Development and Exploration Drilling

. Host DWOP sessions and Pre-Spud meetings

. Extensive Brownfield revitalization work via workovers, redrills, and

sand control ranging from stand alone screens, open and cased hole

gravel packing, pre packed and premium mesh screens repair on wells

with surface inclinations ranging from 15 to 35

. Casing exit methods via whipstock, pilot and section milling

. Casing string recovery

. Develop and manage Drilling and Workover Rig schedules

. Modify and upgrade slant workover rig to have the capability to Drill

. Work as Operations Drilling Engineer, Well site Engineer and Day

Drilling supervisor as required

. Well site Engineer for Niko Explorations wells

. Prepare and distribute daily Drilling Reports

. Perform daily well cost tracking

. Track project KPI's

. Conduct after action reviews

. Prepare load out lists and seven day look ahead

. Perform casing tallies

. Prepare section summaries and end of well reports

. Point of contact for service providers, EMA, MEEA and Petrotrin

. Convert existing Hydraulic artificial lift slant wells to HDESP, ESP

and PCP

. Participate in well reviews and locate alternative forms of artificial

lift to move away from hydraulic pumping and power oil system

. Develop cost tracker and project management handbook for Drilling,

Workover & Structural work

. Prepare tender packages for Drilling campaign services, Platform

Refurbishment and Inspections

. Negotiate Drilling service contracts and service orders

. Develop rig maintenance schedule

> Structural Engineering

. Develop SOW for Topside and Subsea inspections of Trintes platforms

that are +40 years old

. Develop SOW for refurbishment of Trintes platforms

. Perform Platform loading calculations for drilling package per well

location

. Perform structural assessment of platforms from results of inspections

alongside Engineering firm using SACS data

. Project manager and Engineer for Cathodic Protection retrofit using

retro pod design

. Repair three leaks on existing line to shore using split sleeve clamps

. Develop SOW for replacement of existing eight inch line to shore using

surveys, sonar and production forecast data

. Assist in Basis of Design (FEED) for green field development

. Develop Platform structural monitoring schedule for twenty five years

along with corrosion treatment and prevention plan (Topsides & Subsea)

> Maintenance and Facility Engineering

. Develop equipment maintenance procedures in accordance with API 14C

standard for facilities

. Fire and Gas system detection and suppression design for Brownfield

and tank farm

. Spec and procure LACT Unit for Tank farm

. Develop Civil, Electrical and Piping Scope of Works for installation

of LACT Unit

. Acquire approvals from joint venture partner and Ministry of Energy

for facility modifications and new equipment installations in

accordance with MOC process

. Design and execute communication upgrade for platforms and Tank farm

> General Duties

. Coach and mentor Junior Petroleum, Drilling and Maintenance Engineers

. Prepare AFE's and Budget forecast for Pipelines, Facility and Tank

farm upgrades

. Company representative at TAPS (Trinidad Association of Petroleum

Scouts), Ministry of Energy, Joint Venture and SPE meetings

. Member of Tenders and Contracts committee

. Prepare presentations and updates for Board of Directors, Joint

venture partners and Ministry of Energy

. Conduct training presentations to Finance, Procurement and Junior

Engineers

. Chairman of ICT (Information and Communications Technology) committee

. Act as OIM and production supervisor

October 2004 - May 2009

bpTT

Drilling & Completions Engineer

Liaise with 3rd party service providers, during all well program stages

Writing of the Drilling and Completion programs for wells from 8,000ft

to 20,000 ft TVD

Visiting the rig for pre-spud presentations and as operationally

required

Operations/Wellsite Engineer for Ibis Deep 25,500 ft Exploration well

Working within the drilling regulations and ensuring compliance with

both local regulations and the BP Value Assurance Framework and BP Well

Engineering Management System

Operational and Well Site Drilling Engineer during the drilling phase

Compilation and editing of the end of well report

Working with the Logistics team to ensure appropriate equipment

scheduling

Offset data reviewing for relevant wells

NPT tracking

Tracking of lessons learnt

Monitoring well progress and ensuring all relevant information is

tracked

Bit selection

Support for Senior Drilling Engineer and Senior Completions Engineer

QA/QC of tools: make-ups and testing

Define Statement of requirements for material and equipment as per API

and HSE standards

Completions program development - Open Hole Gravel Pack, Open Hole,

Stand Alone Screen, Cased Hole, Expandable Sand Screen Completions

Writing and co-presenting well progress updates to the management team

Compilation and editing of the end of well report

Communication on a regular basis with the Well Examiner

Raising PO requisitions for equipment and services negotiating with 3rd

party suppliers

Manage and update completions database

Perform Job Risk Assessments, Tool Box Talks, Safety Observation

Conversations and Job Safety Analyses.

Ensure planning, and execution functions to engage work teams during

projects

Writing morning reports

Writing and issuing 5 day look ahead

Maintaining EOWR daily summary

Updating well files, e.g. TVD monitoring, general well files, etc

Casing / liner tallies and space outs

Cement, displacement & test volume calculations

Witnessing pressure tests

Hydraulics and torque & drag modeling / analyses

Toolbox safety meetings

Implementing Drilling Supervisor's daily work instructions

General assistance to Senior Drilling Supervisor

[pic]

EDUCATION:

Currently Pursuing

. Project Management Professional (PMP) Certification

Chess Ltd College of Health, Environmental & Safety Studies

. NEBOSH certificate in Health and Safety

Pt. Lisas Safety Training

. PLEA Passport Induction and Emergency Training

July 2006 - September 2008

. Masters of Science Petroleum Engineering

September 2000- September 2004

. Bachelors of Applied Petroleum Engineering

[pic]TRAINING:

. DIMS/Open Wells Reporting & Well Plan

. RIMBase

. Advanced Drilling Techniques

. Corrosion Technology

. Well Control

. HSE Leadership

. Advanced Safety Audit

. Decision Making & Risk Analysis

. Task Based Risk Assessment

. Incident Investigation

. Rig Ops & Safety

. BP First level Leader Training

. Project Management ( BP )

. Asset Management

. QA Auditing

. Financial Management

. Well Intervention

. Well Production Performance

. Drilling Fluids

. Environmental Management

. Material Selection

. Root Cause Specialist training

. Training in Planning and Scheduling using Primavera Project Planner

. Basic Safety ( B.O.S.I.E.T Basic Offshore Safety Induction and Emergency

Training )

[pic]SKILLS MATRIX

Skill Type Product Skill Years Last

Level Experien Used

1=low, ce

10=high

Software Design - Android OS 8 2 Ongoing

Drilling applications and

Excel

Well Planning Well Plan 10 6 Ongoing

Stress and Strain Well Cat 9 6 Ongoing

Modeling

Drilling and Landmark EDM 9 6 Ongoing

Completions Design Suite

Planning Primavera Project 10 7 Ongoing

Planner, Maximo,

Microsoft

Projects

Fire Detection and Water CAD, Fire 8 6 Ongoing

Suppression CAD, AutoCAD

Documentation, Microsoft Office 10 17 Ongoing

Calculations,

Spreadsheet, Email,

etc

Data Analysis, CMAS 10 6 Ongoing

Trending, Modeling

Gravel Pack SandCade 8 6 Ongoing

Simulation

Drilling Operations FracCAT 9 6 Ongoing

Job Control

[pic]

References:

Mr. Francis Tang - TETCO Engineering Services Limited - Director -

Tel: 713-***-**** - Email: *******.****@***.*** / **************@*****.***

Mr. Alfred Ollivierra - Bayfield Energy - Consulting Petroleum Engineer -

Tel: 868-***-**** - Email: ******.**.**********@*****.***

Contact this candidate