Engineer Project
Resume:
LAMBENT NGUYEN
**** ******** **, *******, ** ****2
*************@*****.***
US Citizen
Ability to obtain U.S Clearance
SUMMARY OF QUALIFICATIONS
* 5 years experience in designing HVAC and Plumbing system including:
- Boilers, air handler units, cooling towers, geothermal system, heat exchangers, ductworks
- Water heaters, water pumps, domestic and sanitary piping systems.
- Natural and propane piping gas systems.
* 4 years experience in projecting, installing, and troubleshooting of semiconductor equipment, manufacture printers and basic electrical including:
- Semiconductor: Lam 2300, Exelan & Kiyo. AMAT producer and DPS
- RF plasma, frequency, and basic electrical AC/DC.
* Skills and knowledge in fuel/oil/diesel piping system design and NFPA fuel & oil code including:
- Determination of required flow rate, maximum inlet suction, discharge pressure
- Design of fuel oil piping system
- Size and select of proper control strategy, generators, pumps, tanks, etc.
* Basic to intermediate knowledge of AC/DC circuits, including: fundamentals of electricity, and basic electronic components and circuit is preferred
* Able to read and draw architecture, structure, civil, mechanical and electrical plan.
* Proficient in Microsoft Office applications and strong data collection skills.
* Strong mechanical backgrounds with hands on experience in test, diagnose, troubleshoot, repair equipment and evaluation of design.
* Demonstrate high level of initiative and problem-solving skill in complex manufacturing environment. Design and maintain quality systems for inspecting, recording, and tracking materials of incoming product, manufactured parts, and completed assemblies.
* Develop and optimize manufacturing processes, design of equipment, tooling. Establish preventive maintenance procedures for production equipment. Develop and implement continuous improvement that supports cost reduction and enhances manufacturing methods.
* Possess ethics and character of the highest caliber; credited with giving 100% effort.
* Self-motivated, reliable, professional, competent and attention to detail.
PROFESSIONAL EXPERIENCE
Equipment Engineer Micron Technology Inc
Manassas, VA 04/2011-05/2013
* Specializing in semiconductor Lam 2300 Exelan and Kiyo. Responsibility for tool improvement projects, repairing, installing and troubleshooting on: RF plasma, gas, heat units, vacuum pump, vacuum system, frequency and electrical issues.
* Monitor tool performance, schedule and perform preventative/corrective maintenance on assigned tool sets
* Use mechanical, electronic and computer application software skills to troubleshoot and repair equipment issues.
* Assist with equipment installations and tests.
* Create and modify equipment procedures.
* Increase tool uptime through systematic problem solving and troubleshooting, quality workmanship and thoroughly documenting all maintenance performed in established check sheets and tracking programs.
* Conduct routine reviews of maintenance check sheets and procedures
* Monitor, analyze and address Statistical Process Control (SPC) issues for area processes on daily basis and respond to SPC out-of-control issues.
* Assist Total Preventive Maintenance (TPM) related works and carried out TPM Continuous Improvement Project.
* Works effectively with vendors on solving problem and repairing.
* Design and develop projects to monitor, reducing time of troubleshooting and save the budget for company.
Invention: LN Clamp, Locker door.
Project: HBR cable upgrading, Auto Touch Up recipe
Mechanical Design Engineer Gauthier Alvarado and Associates
Falls Church, VA 02/2010 - 04/2011
Erdman Anthony Associates
Mechanicsburg, PA 07/2008 - 10/2009
* Specializing in HVAC, plumbing and gas piping systems for schools, hospital and post offices.
* Analyze plans, calculate, perform design and edit specifications for boilers, cooling towers, geothermal, heat exchangers, air handler units, fans and water pumps for residential, commercial, and governmental facilities
* Knowledge and experience in most every HVAC & Plumbing devices, units, equipments and systems in pass/current market.
* Reviewing and approval/disapproval of construction contractor submittals to ensure conformance with the requirements and intent of contract documents, drawings and specifications.
* Assist in coordinating all aspect of the project design with project management architects and other engineers through the completion phase of a mechanical construction project.
* Estimated mechanical costs of large commercial, industrial, institutional, and housing projects (e.g., government buildings, warehouses, factories, industrial buildings, multi-storied housing facilities, etc.). Computed costs of materials, equipment, and labor; included differentials for inflation.
* Providing start-up assistance as required.
* Continually interact with the client during the project development.
* Work closely with equipment vendors and manufactures representatives for selection and specification of appropriate equipment.
* Project accomplished including:
Wickersham Hall, Millersville University, Pennsylvania
Reston, Merrifield and Springfield Post offices.
Plumbing Design Engineer DJG Inc
Williamsburg, VA 06/2006 - 07/2008
* Specializing in Plumbing and gas piping system design for fire stations and rest areas.
* Preparation of superior quality construction documents for plumbing and fire protection design of building including calculations, drawing, specifications and reports
* Create plumbing, natural/propane gas piping system and fire protection design drawings using the AutoCAD drafting program
* Size and select appropriate equipment including plumbing fixtures, water heaters, thermal expansion tanks, pumps, etc.
* Close coordination with the client and the entire design team including owner, architects, contractors members of other disciplines, and internal support staff to ensure the design is consistent with what the client has envisioned, to ensure a fully coordinated inter-disciplinary design, and to ensure the design schedule is maintained
* Work closely with equipment vendors and manufactures representatives for selection and specification of appropriate equipment
* Work closely with utility companies as required by the project
* Perform construction administration services such as answering requests for information (RFIs), issuing addenda or proposal requests when necessary, reviewing contractor change orders requests for validity and reasonability, etc.
* When required by the project, perform pre-design site surveys and construction observations, including producing all required drawing, reports, etc. Required to acutely convey the information gathered.
* Assist in the development of proposals for new projects including definition of the project scope, budget estimates and design schedules.
* Projects accomplished including:
Plumbing and Harvest Rainwater system for New Kent Rest Area, 9000+ sf on route 64 east of Virginia
Domestic water and sanitary drainage and gas piping system for Spotsylvania Fire Stations
Manufacture Technician R.R Donnelly & Sons Company Lancaster, PA 01/2004-06/2006
* Responsible for running, maintaining, troubleshooting, developing and improving processing equipment, manufacture printers, the belt-time, stock muscle which is related to heat transfer, vibration and thermodynamics.
* Responsible for multiple simultaneous projects, including the ability to work under pressure, meet tight deadlines, and utilize problem-solving skills to ensure projects met stated goals and objectives.
* Performed multiple tasks with varying priorities, work with many departments within an organization to ensure smooth operation, productivity; identify areas of improvement and enhance procedures.
EDUCATION
Bachelor of Science in Mechanical Engineering Penn State University
State College, PA 2004
ADDITIONAL TRAINING
Air Conditioning & Refrigeration Program Certificate Trane
Harrisburg, PA 2009
Lam 2300 Exelan & Kiyo Dry Etch Equipment Certified
Fundamental and traveler of DRAM, NORD & NAND process Certified
Micron Technology Inc
Manassas, VA 2012
COMPUTER & TECHNICAL SKILLS
* Semiconductor: E3 (FDC)), LamDAanalyzer, Klarity, Toolview, ETI
* HVAC: Carrier, Trane & HAP 4.4, AutoCAD, RevitWork, MEP 3D and Solidworks
* Plumbing: Natural/Medical Gas Chart, Domestic Water chart, Pump Calculation
* Computer: Microsoft Office (Word, Excel, and PowerPoint), Adobe, Matlab
REFERENCE
Available upon Request
Contact this candidate