RESUME’ FOR ROGELIO DELA CRUZ ABIOG
Date Prepared: January 20, 2013
E-mail Address: **************@*****.*** Address: 4811 Ebenezer Road
Phone Number: 443-***-**** Nottingham, Maryland 21236, USA
POSITION DESIRED:
SR. CONSTRUCTION INSPECTOR, FIELD or OFFICE ENGINEER, PROJECT ENGINEER,
PROJECT MANAGER, QC MANAGER, QA MANAGER
OBJECTIVES:
- To work as Project Manager/QC Manager/QA Manager for construction or infrastructure
project using the knowledge and skills of project management theory and practice.
- To work as Field or Office Engineer, Project Engineer and to perform engineering works
associated with the planning, design and construction; site and laboratory testing of
materials; inspection as to compliance to code, design manual, plan, specifications and
construction standards with application of thorough civil engineering and surveying
knowledge.
-To work as Sr. Construction Inspector and to ensure that construction works comply
with applicable contracts, designs, plans, specifications and manuals, testing of
materials, and engineering practice and standards
- To perform duties and responsibilities with a highest professional standards, and to strictly
adhere to the policies and guidelines of the company.
.
SUMMARY OF QUALIFICATIONS:
- Experienced Sr. Construction Inspector working on the construction of road and highway,
bridge, storm management pond, retaining wall, gravity wall, MSE wall, box culvert,
overhead sign, traffic light signal, light pole and road warning sign for Federal Highway
Administration, Virginia Department Of Transportation, Maryland State Highway
Administration and Howard County
- Certified Project Management Professional (PMP) by Project Management Institute (PMI).
- Career Service Executive Eligible- CSC Resolution No.030142
- Registered Geodetic Engineer ( Philippines Professional Regulation Commission).
- Registered Civil Engineer (Philippines Professional Regulation Commission).
- 10 years experience as Department Head of Municipal Planning and Development Office in
the Philippines.
- 4 years experience as Center Manager for a Philippine- European Union Joint Project.
- 10 years experience in zoning regulation and inspection in the Philippines.
- Certified Construction Quality Control Manager by USACE
- Certified Temporary Traffic Control Traffic Manager by the SHA/MTBMA.
- Certified Concrete Field Technician by ACI/MARTCP
- Certified Hot Mix Asphalt Field Technician by MARTCP
- Certified Erosion and Sediment Control Responsible Personnel by State of Maryland
- Have experience, knowledge and skills in construction stakeout and surveying using Sokkia
Set 510 Total Station and TDS Ranger Data Collector - Survey Pro Windows Mobile 2003
- Knowledgeable and familiar with the Design Manual And Construction Standard Of Howard
County, Virginia Dept. of Transportation Roads and Bridges Specifications and Maryland
State Highway Administration Standard Specifications for construction and material.
- Knowledgeable and familiar with Manual for Uniform Traffic Control Device (MUTCD),
AASHTO - Policy on Geometric Design of Highways and Road, Hot-Mix Asphalt Paving
Manual and Handbook, American Concrete Institute Workbook and Traffic Engineering
Handbook
- Computer Literate (ARC GIS 1 & 2, Spatial Analysis, 2002 Microsoft Project Level 1 & 2)
EDUCATIONAL BACKGROUND:
- Bachelor of Science in Civil Engineering
Mapua Institute of Technology, Intramuros, Manila, Philippines, 1990
EMPLOYMENT EXPERIENCE:
I. Company: KCI Technologies, Inc.
Address: 936 Ridgebrook Road, Sparks, Md 21152, USA
1. Date: September 18, 2012 to Present
Client: USA- Maryland State Highway Administration-Dist. 3
Position: Assistant Project Engineer/ Supervising Inspector
Position Description:
- Supervises or oversees inspection staff on a daily basis;
- Give guidance and assistance to the SHA Inspectors assigned to the project;
- Reviews Inspectors documentation and ensures that daily activities are properly
documented;
- Resolves and coordinates issues on the field between and among SHA Inspectors and
contractor crews;
- Schedules and directs the work of SHA Inspectors working in the project;
- Attends weekly, monthly and other meetings being called by SHA or contactor;
- Get involves in the resolution of issues regarding construction, design, administration and
management of the project with Project Engineer, contractors and other stakeholders;
- Performs office Engineer's work as directed;
- Performs complex engineering and inspection task;
- Fill-in the role of Project Engineer in his absence.
Project Description:
The project consist of the design and construction of a new interchange at the existing
Van Dusen Road crossing I-95 with the cost of $33,000,000.00. The minimum scope of
the project includes a 4-lane bridge crossing I-95 supporting the proposed 1-95
collector/
distributor (C/D) roads. The C/D roads are to be built by others and are not included as
part of this contract. In addition to the bridge, the minimum contract includes two loop
ramps and two directional ramps in the south-wwest and south-east quadrants of the
inter- change. The ramps will tie-in to the C/D roads to be built by others. The minimum
contract also includes approximately 3,700 feet of Contee Road Relocated new roadway
construction.
The maximum contract limits include approximately an additional 1,300 feet of new
roadway construction to the east, including a new construction with Van Dusen Road; and
approximately an additional 1,450 feet of a new roadway construction to the west
towards Old Gunpowder Road.
The utmost importance to the Administration for this project is to complete the
demolition of the existing Van Dusen bridge over I-95 on or before the required date in
the RFP while designing and constructing the maximum project limits and associated
improvements feasible, within the maximum price established for the project.
Maximum project roadway improvements include new full depth construction,
construction of roadway tie-ins, reforestation, closed/open drainage systems, erosion and
sediment control, maintenance of traffic, signal work, roadway lighting, signing and
marking, earthworks, SWM quality and quality facilities and utilities relocations.
2. Date: June 8, 2011 to September 17, 2012
Client: USA-Maryland State Highway Administration-Dist. 3
Position: Sr. Construction Inspector/ Lead Inspector
Work Description:
This is an advanced technical or senior project management of work performing a
variety of complex engineering support tasks. Specific duties include as Project Engineer
for large sized construction and maintenance projects; overseeing complex maintenance
activities; overseeing the development and advertisement of maintenance contracts,
overseeing budget allocation statewide. Other duty is to give guidance and assistance to
less experienced employees and may supervise a project team, crew or unit.
Routine work responsibilities are to do reviews and give comments on design submittals
from consulting engineers to ensure compliance with standards; meet with consultants to
resolve problems; provides information to and works with architects, engineers,
contractors, developers, and the like to ensure adherence to proper standards and codes;
oversees or performs plan preparation and review during construction and maintenance of
roadways, structures and traffic control devices for conformance to plans and
specifications; compiles, documents and reviews construction reports including cost and
other data; reviews special provisions, design agreements, and continuity of plans as
necessary, assists in determining if contract plans adhere to current standards and
practices.
3. Date: April 16, 2009 to June 7, 2010
Client: USA- Federal Highway Administration -Eastern Federal Land Highway Division
Position: Sr. Construction Inspector/ Lead Inspector
Work Description:
- Supervises the group/team of inspectors working for the project.
- Prepares and updates monthly administrative cost
- Facilitates interactions between/among QC, QA, and IA
- Resolves and refers to proper stakeholders issues, conflicts and variances in
the project
- Participates and attends meetings with clients, contractors, subcontractors and
other stakeholders.
- Conducts review and analysis of project schedule (CPM-PS), material
submittal, Request for Information (RFI), shop drawings, environmental
control, traffic control, material register, as-built drawings and project
files.
- Performs complex and challenging engineering and construction inspection.
Project Description:
The Parkway Project (Phase I & II)- Consists of constructing a four-lane divided
limited access highway to complete the missing link of the Fairfax
County Parkway. The project corridor begins at Rolling Road/Franconia-
Springfield Parkway and proceeds southeastward on a new alignment and ends
east of Fullerton Road. This corridor is approximately 1.5 miles long and a
majority of the new alignment is located on the southern portion of the BNA. The
work involved in the Parkway Project includes grading, drainage, paving,
bridges, noise walls, lighting, traffic signals, landscaping, signing and striping.
The total budget for Phase I & II is ~124M with ~$75M for the design/build
contract.
Phase III–Consists of all work to the west of the Donegal Lane intersection. This
work includes Franconia-Springfield Parkway interchange
improvements, relocated Hooes Road, relocated Rolling Road, and Ramp D from
existing eastbound Parkway onto the new Phase III of the Parkway. This
phase includes bridge B-692 and noise walls for relocated Rolling Road and
noise walls along Ramp D. The delivery of this Phase is through a separate
design-build contract that was awarded on January 13, 2010. The final design
plan submission was approved in October 2010, with construction beginning
in November. The Phase III Project is scheduled for completion by July 20
(Cost ~ $22M).
Phase IV – Consists of all work on Boudinot Drive and the associated
interchange. This phase includes bridge B-693 at Accotink Creek and has been
identified as the higher priority by the local public, with the Fairfax County
Board of Supervisors passing a resolution to formally support this. This Phase
was added under a contract modification to the current design-build contract for
Phases I and II (Cost ~ $23M). The final design plan submission was completed
in January 2010, with a completion of construction by July 2011.
4. Date: June 2007 to April 15, 2009
Client: Municipal Government of Howard County, MD, USA
Position: Construction Inspector
Work Description:
-Responsible for the inspection of construction projects more particularly in
areas of utilities such as water, storm drain, sewer, underground water storage
tank for Fire Department and some developers road.
Inspected installation, laying and connection of water main pipes, fire
hydrants, water valve, water main tapping, water house connection,
sewer main pipes, sewer house connection, storm drain pipes (HDPE
and (RCPC), pre-cast concrete manholes, inlets, headwall and riprap.
-Checked and verified elevation, profile and slope of road surface, sub-grade,
curb and gutter and side walk using level instrument.
-Conducted water line hydrostatic pressure test, water main tapping
pressure test, chlorine test and sewer line low pressure air test.
-Ensured that construction works comply with applicable contracts,
designs, plans, specifications and manuals, testing of materials, and
engineering practice and standards.
-Evaluated the workmanship and accomplishment of the contractor
employed by the Howard County using effective inspection techniques.
-Checked and verified construction survey stakeouts against plan, profile
and cut sheet applying geodetic engineering theory and practice.
-Conducted geo-technical evaluations, investigations, and testing
specifically road and trench compaction.
- Applied sound judgment and diplomacy on issues and problems.
II. Company: Robert H. Vogel Engineering, Inc.
Address: 8407 Main St. Ellicott City, MD 21043, USA
Date: October 4, 2006 to June 15, 2007
Position: Instrument man/ Survey Crew Member
Work Description:
- Works as member of a survey crew performing boundary, property location,
topography, construction stakeout and survey, ALTA, grade certification and wall
check.
- Maintains and operates surveying instruments and measuring devices
needed for different types of survey works.
. - Knowledge in the use and operation of Sokkia set 510 total station
- Performs Angle and distance measurement
- Performs Vertical and horizontal offset measurement
- Performs Coordinate measurement
- Knowledge in the use and operation of Data Collector( TDS Ranger -
Survey Pro Windows Mobile 2003)
- Operating job menu, survey, stakeout, leveling, and inverse menu
- Knowledge in reading, understanding, and interpreting construction
plan, site development plan, architectural plan, cross sectional plan,
survey plan /plat and map
- Knowledge in traverse control and management
III. Practicing Geodetic Engineer/ Surveyor
Brookes Point and Espanola, Palawan, Philippines, 1994 to 2006
Work Description:
- Prepared lot, subdivision and cross section plans, road profile, site
development plan, forest/ urban/rural land use plan
- Conducted topographic and subdivision survey for
residential, agricultural, commercial and industrial property and development
- Conducted construction stakeout and survey
IV. Practicing Civil Engineer
Brookes Point and Espanola, Palawan, Philippines, 1994-2006
Work Description:
- Prepared plans for residential, commercial/institutional type of buildings
- Prepared construction management plan/documents, estimates, bill of
materials and program of works
- Signed plans of various types of buildings
- Supervised and managed construction and project development of various type
` of civil engineering works
V. Municipal Planning and Development Coordinator
Municipality of Sofronio Espanola, Palawan, Philippines
Date: 1995-2006
Work Description:
- Analyzed the income and expenditure patterns, formulate and recommend
fiscal plans and policies
- Prepared comprehensive plans and other development planning documents
- Monitored and evaluated the implementation of the different development
programs and project
- Exercised supervision and control over the secretariat and activities of
Local Development Council
- Managed and supervised operation of the office including staff
- Conducted zoning inspection and prepared report.
- Prepared minuets of the meeting of the Local Development Council.
VI. Center Manager (Detailed)
South Palawan Planning & Information Center, S. Espanola, Palawan, Philippines
Date: 2002-2006
Work Description:
- Coordinated and supervised implementation of various development projects
- Acted as secretariat to the meeting of the Council (with Local Executives)
- Presided as chairman to the meeting of the Technical Working Group
- Attended meetings being called by the European Union and other agencies
- Had administrative control and supervisions to the operation of the center
including its staff
- Prepared and submitted reports to the Council
- Prepared minutes of the meeting of the Council.
VII. Engineering Assistant
Department of Public Works and Highways, Palawan, Philippines, 1990-1991
Municipal Government of Brooke’s Point, Palawan, Phils., 1992-1995
Work Description:
- Drafted various engineering plans and maps
- Prepared bill of materials and program of works
- Conducted road, subdivision, hydrographic and construction survey
- Prepared construction management documents such as PERT/CPM
- Supervised and managed various buildings, roads and bridges constructions
REFERENCES:
1.) Adam Gardner
CEI Practice Leader-Sparks Office
KCI Technologies, Inc.
Office Address: 936 Ridgebrook Road, Sparks, MD 21152, USA
Tel Number: 410-***-****
2.) Robert Barnett
Supervising Construction Inspector
Howard County Department Of Public Works
9250 Bendix Road, Columbia, MD 21045, USA
Tel. Number: 410-***-****
3.) Timothy Brown
Sr. Project Engineer
Eastern Federal Land Highway Division-FHWA
Fairfax County Parkway Project
Tel. Number: 1-865-***-****
4.) Ruel A. Sabellano, PE
Transportation Design Engineer III
Maryland Dept. Of Transportation- State Highway Admin.
Tel. Number: 443-797- 4113