Engineer Project

Mail ID : *******.*******@*****.***

MOB : +919*********

Objective

To work in progressive and challenging environment in CAE domain that

provides an opportunity to be a key performer and a substantial contributor

towards achieving organizational objectives.

Experience Summary:

Organization Designation Duration

Axiom Consulting, Bangalore Project Engineer (CAE) January 2011 - Till

date

CADMAXX Solutions Trainee Engineer (CAE) October 2010 - January

2011

Essential Engineering Trainee Engineer (CAE) March 2010 - October

Solutions, Bangalore 2010

Trelleborg Sealing Solutions, Asst. Engineer (Sales) March 2008 - February

Bangalore 2010

Educational details:

Course Institution Duration

B.E (Mechanical University Visveswaraya 2004-07

Engineering) College of Engineering,

Bangalore

Diploma In S.J.Polytechnic, 2001-04

Mechanical Bangalore

Engineering

SSLC Karnataka Vidya Shala, 2000-01

Bangalore

Softwares expertise:

CAE : Hypermesh, LS-Dyna,

Optistruct

CAD : CATIA, AUTOCAD

List of Projects Handled at Axiom:

Project: Tablet PC (For leaders in s/w, h/w and gaming sector headquartered

in US)

> Evaluation of structural integrity of the Tablet PC under different

drop conditions like Corner drop, Face drop and few other

orientations from a height of 49 inches onto a Rigid floor and Hard

wood floor.

> Meshing of various components and the pre processing was carried out

using Hypermesh.

> Structural analysis was performed using LS-Dyna.

> Post-Processing of results was done using LS Pre-post.

> Drop tests for different upgraded design versions from V2 to V5 were

also carried out similarly.

Project: Air purifier (For a leading consumer goods company, headquartered

in US)

> An air purifier has been developed at axiom, which is used to purify

the air inside a room. The purifier has got an impeller which sucks

the dusty air in while rotating and send out the fresh air. The inner

part of the impeller has a filter cloth which traps the dust.

> A drop test from a height of 1.5m was done in order to check the

structural stability of the product.

> A knob press test was carried out to make sure that the knob does not

come in contact with the impeller or other inner components of the air

purifier when a person is operating the knob.

> Failures were observed during drop tests. Hence various design

modifications were suggested and also validated by subsequent drop

tests.

> Meshing of different components and deck preparation was done using

Hypermesh.

> Structural analysis carried out using LS-Dyna.

> Post processing of results was done using LS Pre-post.

Project: Wella display kit (For a leading consumer goods company,

headquartered in US)

> Wella display kit is an enclosure that contains hair color. The

enclosure has two halves which are connected by a series of snap fits.

The force required for the snap fit was analyzed at Axiom.

> A structural analysis was carried for determining the force required

for snapping and unsnapping the assembly.

> The snap fits were working fine but some stability issues were

observed. This was solved by providing locators to aid proper snapping

direction.

> Meshing and pre processing done using Hypermesh.

> Structural analysis carried out using LS Dyna.

> Post-processing of results was carried out using the LS Pre-post.

Project: Wine bottle analysis (For a leading spirits company headquartered

in Hamilton)

> Burst test on the wine bottle was carried out to understand the

failure of bottle when it is filled with fluid at high pressure.

> Top to bottom crush and side crush tests were done in order to check

the maximum force that the bottle can withstand when it is stacked one

upon the other.

> Drop test under two different orientations from a height of 1.2m were

carried out to check the structural stability of the bottle.

> Meshing and pre processing was done using Hypermesh.

> Structural analysis carried out using LS-Dyna.

> Post processing of results using LS Pre-post.

Project: Retail Ready Package (For a leading packaging company based in

Virginia)

> Various drop tests were carried out on the corrugated fiber board

packages to check the structural stability of the package when it is

dropped from a height of 1.5m.

> Tearing tests were done to determine the force required to tear the

package along the perforations that are provided for tearing, so that

the products can be kept for display in the same package.

> Top and side load tests were carried out in order to determine the

load that the package can carry when it is stacked one above the other

while transporting.

> Meshing and pre-processing were carried out using Hypermesh.

> Structural analysis carried out using LS-Dyna.

> Post processing of results was carried out using LS Pre-post.

Project: Structural stability of control panels (For a leading electrical

company based in Saudi)

> The structural integrity of the control panel was analyzed by carrying

out a number of drop tests and crushing simulations.

> The main objective was to make sure that all the components in the

assembly stayed intact when it is dropped from a height of 1.5m on to

a rigid wall.

> Crushing simulations were carried out to make sure that the outer

cover was strong enough to carry the stacking loads during

transportation from one place to another.

> Meshing and deck set up was carried out using Hypermesh, solved using

LS Dyna solver and post processing was done using LS Pre-post.

Project: Switch mechanism analysis (For a leading electrical company based

in Saudi)

> A switch actuation simulation was carried out to determine the force

that is required for actuating the switch (On/Off).

> Also the force between the moving contact and fixed contact were

determined by the same analysis.

> Meshing and deck set up was carried out using Hypermesh, solved using

LS Dyna solver and post processing was done using LS Pre-post.

List of Projects Handled at Caddmax and EES:

Project: Meshing of various components for automotive clients.

> 3D hexahedral meshing of dampers, anti vibration pads and various

brake and engine components.

> 2D midsurface meshing of door components, dash board components, front

and rear body components, many other BIW components for major

customers like Ford, GM, Honda, Tata etc.

PERSONAL PROFILE :

Father's Name : Karunan.P.

Date of Birth : 15th September 1985

Age : 27

Marital Status : Single

Languages : English, Hindi, Malayalam,

Tamil, Kannada

DECLARATION

I hereby confirm that the information furnished above is

true to the best of my knowledge and belief.

Place: Bangalore

Date:

(BINEESH KUMAR.K.P)

BINEESH KUMAR.K.P

No.27, "Shruthilayam",

6th A Cross, Anepalaya,

Adugodi (P.O)

Bangalore- 560 030

Contact this candidate