Welding Inspector Qa
Resume:
KENNETH MAYEUX
Thibodaux, La 70301
Home or Fax: 985-***-**** Cell: 985-***-****
Email: *******@***.***
OBJECTIVE: To secure a position in which I can competently and
professionally apply my welding inspector skills as well as offering 36
years of hands on metal working experience.
WORK HISTORY:
10/12-3/13 Lead Pipe Inspector for ENI Petroleum: Witnessed
pipe bends, pigging, coatings,
Dimensional checks. I Tested Procedures
and welders at Helix Spool Base in Corpus
Christy, TX. Witnessed all NDE and
Destructive Testing.
Equipment: One Plet and one Plem.
5/12-8/12 DOR (QA) Client Rep. EPIC Inspection:
Witnessed Subsea inspections, wrote
repair procedures, coordinated fabrication and
Installing repaired equipment/also
topsides inspection on several platforms.
9/11-3/12 Shell (QA) Client Rep. SAI:
Equipment: Fab. & testing of Subsea
valves for the Shell Mars Project @
Cameron in Ville Plate, LA.
6/11-9/11 DOR (QA) Client Rep. For EPIC Inspection Co.
Deck and walkway
Installations/also Subsea Inspections.
12/10-06/11 BP (QA) Client Rep. for DTI/CWI/API 1104:
Fab. Of Subsea equipment double studded
adapters & spacer spools @ T3
Energy in Houma, LA/also many pipe
spools @ Petrex in Harvey, LA.
Client: BP.
8/09-9/10 Worked in the (QA/QC) Sub Sea Inspection Dept. on
Deep Water Manifolds for BP @ Cameron in Berwick, LA.
Performed many hours of PT, MT, PMI, Hardness testing,
weld Audits & Traceability.
05/09-06/09 (QA) Client Rep /CWI:
El Paso Exploration & Production Co.
Location:
GOM Region 1: Pipeline decommissioning
from downed Platforms.
04/09-05/09 (QA QC) Piping Inspector/CWI/ API 1104:
Fab Sub-sea Equipment and Ti-ends/also
8" and 24"
Pipe Lay in the GOM.
06/08-10/08 (QA) Client Rep. /CWI/API 1104:
Fabrication of 6" X .75" flow lines to
6" X 1" Risers Oil w/GSPU field joint coatings & Gas flow
lines w/FBE [FJC] to Risers w/3 coat system [flame spray]
on pipelines prier to spooling for Callon Petroleum Co.
Stationed at Technip Spool base in Mobile, AL.
03/08-06/08 (QA) Client Rep. /CWI/ API 1104 & D1.1: Fab. & Install Cason
w/Decks, Piping & Equipment for Hall Houston Exploration
(HHE). South TX. & G.O.M.
03/07-02/08 (QA) Piping/Structural Inspector/CWI/ API 1104 & D1.1
Faze 2 of the Thunder Horse Project for BP/stationed at
McDermott
Industries in Amelia, Louisiana/ Equipment: Suction piles.
01/07-03/07 (QA) Structural Inspector/CWI/ D1.1 Moody
International
Noble Drilling stationed at Superior
Fabricators
Equipment: Leg Chord/Rack Sections.
09/06-11/06 (QA) Piping & Equipment Inspector/CWI/
API-1104/510 /570: B L D Inspection.
Shell Norco 2006 Turn Around.
06/05-09/06 Lead (QA) Piping/Structural/Vender Surveillance
/CWI/
API 1104 /510 /570 & D1.1
Competitive Management Systems, Inc.
(CMSI)
Lead Inspector for VAALCO Energy, Inc.
Fabrication & Installation of the
Avuma Field Jacket,
Line Pipe, Sub Sea Equipment and
Platforms w/equipment.
04/05-06/05 (QA) Piping/Structural Inspector/CWI/ API 1104/D1.1:
White Wing Inspection.
Blue Water, Ind. Stationed in Alabama.
08/04-04/05 (QA) Preservations and Maintenance
Coordinator/Consultant /CWI
Moody International/stationed at KOS
in Ingleside, TX.
Equipment Preservation Coordinator
on the Thunder Horse Project
For BP America, the largest deep
water development in the world.
Worked on bringing most of the equipment up from a static
mode to a process mode.
06/04- 07/04 (QA) Structural Inspector/CWI / D1.1 White Wing
Inspection
Danos & Curole at Bollinger Repair in Amelia, Louisiana.
Repairs to legs w/gear racks and pads on lift boat Ana.
01/03 - 05/04 (QC) Equipment Preservations and Maintenance Inspector /
CWI
WHITE WING INSPECTIONS / stationed at McDermott Industries
in Amelia, Louisiana. In charge of all the Top Side
Equipment on 4 Deep Water Projects while in a static mode
for BP America.
10/93 - 12/02 Supervisor of Production: CAMECO INDUSTRIES
Designed jigs and fixtures for better quality & production.
Trained other employees for Example: Engineers, Draftsmen,
Fitters and Welders.
04/84 - 10/93 Field Engineer/Accuracy Control: AVONDALE SHIPYARD
Other work performed encompassed ship fitting, quality
control, and inspector.
02/80 - 04/84 Piping/Structural/Fitter/Welder: SERVICE MACHINE, Ind.
Additional work duties included testing fitters and
welders for employment.
TRAINING: Certified Welding Inspector/ Marine Survival
Training/
EDUCATION: Production Management Course @ Nicholls State University/
CAD Course, Thibodaux Vo-Tech /High
School Graduate
KENNETH MAYEUX
144 Bayou Vista Drive
Thibodaux, La 70301
Home/ Fax: 985-***-**** Cell: 985-***-****
Email: *******@***.***
Dear Sir / Madame:
Please accept this letter as my interest in obtaining a position as a
Certified Welding Inspector with your company. My resume is enclosed for
your review.
In the past 36 years I have had experience in Manufacturing/Fabrication /
Supervising/ designing and inspection. In the passed I've worked on four
of the worlds' largest Deep Water developments for BP America.
I would appreciate the opportunity to meet with you at your convenience to
further discuss my qualifications and how my knowledge and skills may
benefit your company.
I may be contacted at 985-***-**** or cell 985-***-****.
Thank you for your time and consideration. I look forward to hearing from
you.
Sincerely,
[pic]
Kenneth Mayeux
Enclosure: Resume
Contact this candidate