Engineer Project
Resume:
Clarence Coney Jr.
******.*****@***.***
Home: 414-***-****
Milwaukee, WI. 53223
Cell: 801 505-
1863
Summary Of Qualifications
More than 30 years of experience in Construction Management and Civil
Engineering.
18 years of experience managing and supervising Major Construction
Projects.
With Emphasis on Power, Nuclear (DOE), & Fossil Fuel Projects, Including
Airports,& FAA, Building Infrastructure, as well as Transportation
projects. Those named combined with a strong emphasis on Claims Management
work, Refinery, Chemical plants, Food Industry, Transmission & Distribution
work and Telecommunication projects.
20 years of experience in Project Controls Management & Engineering,
Planning/Scheduling & Cost Management combined with EVM talents, as well as
Forensic Scheduling handling Claims Mitigations.
Education
Illinois Institute of Technology
Bachelor of Science, Civil Engineering, BSCE, 1979
University of Wisconsin Madison, WI.
Masters of Science, Construction Management
Department of Engineering Professional Development
Technical Skills
Primavera Project Planner versions 3.0, 3.1, and Primavera P5/P6, versions
7, and 8.
Primavera Enterprise 5.0 6.0, 6.1, 6.2, 7.0 Primavera Expedition 8.0, 8.5,
& 9.0
Primavera Team Play, Primavera Sure Trak, Primavision, MS Project, MS
Office,
Lotus Notes, Lotus, Excel, and Power Point
Primavera Systems Integration between P3, P3e, and P3e/c
Professional Overview
As a Project Controls Professional my duties have consisted of the
following, the preparation of Engineering and Construction schedules. These
schedules have consisted of the following articles of work, Cost Analysis,
CPM Analysis, Manpower and Man-hours, Earned Value Management, Monitoring
project progress, Resource loading, and up-dating schedules. Work has also
consisted of clarifications of contract documents, as well as field
supervision helping to resolve any and all problems through Architects,
Designers, or the Project Managers, and the Program Management Team and or
the Owner or his Representative. I have also prepared Preventive
Maintenance schedules for any and all equipment especially tooling
equipment utilized. These schedules also reflect Equipment Reliability
showing Schedule Maintenance.
As a Civil Engineer, I have performed design work on both roadway and
highway projects. This would also include design work for site development,
Process design of the Course Screen Facility for the Metropolitan Sanitary
District of Chicago.
Career Objective
To establish and Implement a new and Innovative mix of professional
practices, utilizing my leadership, analytical, and communicative skills.
All of which would enable me to successfully function as a Director of a
Project Controls Department, while working in the Operations sector of a
firm utilizing my skill sets as a Claims Specialist Professional.
Rocky Mountain Power/Pacificorp Inc. Project Controls Specialist
(11/2010- 4/2012)
My duties consist of monitoring and identifying deviations to plan for the
Project Manager, and recommend resolutions. To also comply with corporate
governess, provide project controls support as a team member on multiple
project teams, and to develop key performance indicators for critical
department metrics to monitor performance and identify areas of
improvement. Salt Lake City, UT.
Buveck Consultants, Inc Project Controls Manager
(6/2009 - 9/2010)
I was in charge of the
Project Scheduling group, and the Document Controls group. I utilized both
Primavera P6, and Primavera Contract Manager. I am currently doing both
scheduling, and cost control work on the WisDot I-94 N/S Freeway project.
Software being used is Primavera P6 and Primavera Contract Manager,
formally known as Expedition. Milwaukee, WI.
PCTCS Corporation Project Controls Specialist
(9/2008 - 4/2009)
BP Oil Platform drilling located in the Corp office in Houston, Texas. The
software used was P5, and P6 software.
TN & Associates Corporation Project Controls Manager
(6/2008 - 9/2008)
Army Corp of Engineering projects Milwaukee, WI. The software used was P3,
3.1, P3e/c, & P5, and P6 software.
ARES Corporation Principal Project Controls Specialist
(1/2008 - 6/2008)
Syncrude Oil Mining Corporation located in Alberta, Canada. The software
used was P3, 3.1, & P5, and P6 software.
Balfour Beatty Corporation Forensic Scheduler/Claims Specialist
(9/2007 - 11/ 2007)
Construction Claims Division located in Atlanta, Georgia. The software used
was P3, 3.1, & MS Project, P5, and P6 software.
Parsons Corporation Principal Project Controls Specialist
(6/2006 - 8/2007)
New 787 Boeing Aircraft Project located in Everett, Washington. The
software used was P3, 3.1 & MS, P5, and P6 software.
Black & Veatch Corporation Project Controls Analyst
(12/2005 - 5/2006)
Power Plants & Fossil Fuel Projects Located in Overland Park, Kansas, also
worked in the capacity of a Claims Specialist, using P3, 3.1, P3e/c, P5,
and P6 software.
Fluor Government Group (FEMA/TRS) Project Controls Engineer
(9/2005 - 11/2005)
Hurricane Katrina Project located in Baton Rouge, Louisiana. The software
used was P3, 3.1 software
Basulto Management Consultants Sr. Project Controls Engineer
(8/2004 - 12/2004)
South Florida Water Management Projects located in W. Palm Beach, Florida.
I worked as a Claims Specialist using P3e/c, MS Project, and Expedition
software.
Spear Group Incorporated Project Controls Engineer
(3/2004 - 8/2004)
Oil Refinery & Light Rail Projects located in St. Paul, Minnesota &
Hornell, New York. I have Used P3, 3.1, MS Project, and P3e/c software.
Turnaround Management Incorporated Project Controls Engineer
(3/2003 - 3/2004)
Steam Turbine Outage & Exxon Oil Refinery located in Ottawa, Canada &
Joliet, Illinois. I have Used P3, 3.1, MS Project, and P3e software.
Atlantic Project Controls Incorporated Sr. Project Controls
Engineer (5/2002 - 2/2003)
A new 2GE207FA Combined Cycle Power Plant located in Fairless Hills,
Pennsylvania. I used P3, 3.1, and P3e software.
Connective/Pepco Power Corporation Lead Planner/Scheduler
(10.2001 - 12/2001)
Maintenance and rehabilitation work on Power plants located in Newark,
Delaware. I used P3, and 3.1 software.
G.E. Nuclear Energy Incorporated Sr. Project Controls Engineer
(3/2001 - 10/2001)
Worked on Nuclear Power Plant projects through the US, Located in San Jose,
California. I used P3, 3.1, and P3e software.
A.E. Power/Sun Technical Corporation Project Controls Manager
(11/2000 - 3/2001)
I maintained, and Rehabilitated 12 Power plants located in Corpus Christi,
Texas, and were also the Claims Engineer. I used P3, 3.1, and P3e
software.
Bechtel Telecommunications Division Project Controls Manager
(11/1999 - 11/2000)
Detroit, Michigan
I worked on the Metromedia Fiber Optic Network Program. A Claims Specialist
that used P3, 3.1, Sure Trak software.
Las Vegas, Nevada
I worked on the Venetian Casino Project, duties generating base
line and CPM schedules,
As well as and field supervision of crews working particularly on
the Fire Protection system Installing and testing
the devices. Other Infrastructure work included Foundation walls
and the Installation of Pre-Cast panels.
This work used P3 and Sure Track software.
Ionic's Corporation Incorporated Project Controls Engineer
(10/1998 - 10/1999)
New Water/Waste Water Desalinization Plant located in Boston,
Mass/Trinidad. I used P3, and 3.1 software.
Permanent Positions
Kraft Foods Inc., (Oscar Mayer) Madison, Wisconsin
(9/1995 - 10/1998)
Lead Planner/Scheduler and Field Engineer
Lead Scheduler In charge of the scheduling staff, of the corporate
office in Madison. Primavera P3 and Sure Track software used to
build project schedules. I produced preliminary and construction
schedules for new plants as well as plant renovation work.
Schedules were generated for project brochures for each plant,
including those that were issued for to the field for contractors
to work by. My region was that of Northeast New York State.
My duties also entailed performing structural analysis of existing
buildings, and reviewing structural design work for new additions.
I then became the field liaison person representing Kraft Foods
while work was on going at the construction site.
Unlimited Design Concepts, Inc. Indianapolis, Indiana
(7/1994 - 8/1995)
Senior Construction Manager
Managed and supervised all project aspects assigned to the Gary,
Indiana branch office. This work included contract negotiations,
planning, design reviews, cost engineering, and P3 scheduling. I
also functioned as the liaison person representing my company
between the prime contractor, city, state and federal authority's
involving the state of Indiana. My services were also called upon
to act as the claims manager, representing the previous project
owners (design build firm) against the state of Indiana. I Met with
the Gary Mayor and his staff, plus the Gary board of review once a
week to provide proof of progress, and to submit vouchers for
payment of work completed as per CPM schedule.
Bowles Company's Inc. Milwaukee, Wisconsin
(11/1989 - 7/1994)
Bowles Midwest Corp., Chicago, Illinois
Senior Project Manager
. O'Hare Automated Guide-way Project, City of Chicago - Managed
site development of a 20,000 sq. ft. MATRA Rail Facility.
Established engineering standards, field supervision
coordination, and Project Controls, using P3 Primavera
software.
. METRA 179th Street Community Rail Facility, Orland Park,
Illinois - Managed site development of a 100,000 sq. ft.
commuter train system. Prepared payment estimates, contract
modifications, and project scheduling. Coordinated crews,
with field directives, technical clarifications, and overall
contract administration. Water Reclamation District of
Greater Chicago, Stickney, Illinois - I managed and
supervised renovation of the Gas Digester Auxiliary Facility.
I maintained conformance with construction documents and
specifications. Other functions including generating base
line schedules, and acting as the purchasing agent for the
project.
Bowles Construction Services Milwaukee, Wisconsin
Project Manager
I managed the design build development of three Milwaukee schools.
This project totaled more than 1,000,000 sq. ft. of new
construction, and an additional 100,000 sq. ft. of renovation work.
I ensured contract compliance with construction documents, and
specifications. Field supervision of several construction crews
performing work on the project.
Claims Manager As a claims manager I prepared a claim against the
Milwaukee Metropolitan Sanitary District. The claim was prepared by
using field documentation, analyzing construction schedules, and
cost analysis. Bowles did in fact win the claim without having to
go to court. Amount awarded was $2 million dollars.
Raytheon Corp.,/ FAA Saginaw, Michigan
(10/1988 - 10/1989)
Resident Engineer
Resident Engineer for the FAA, Great Lakes Regional Office in
Rosemont, Il. I supervised the conversion of the Tri-City's Airport
runway lighting system Monitored by inspection of daily
construction activities. My duties entailed verification of the
Contractors compliance with the contract documents and
specifications. I prepared up-dated schedules, payment estimates,
and contract modifications. I also provided technical
clarifications to Contractors involving FAA procedure. Work
performed in compliance with Airport, and City (DPW) officials.
Obtained clearances for the work to be performed, reported to the
tri-City's airport officials and their review board on work to be
completed, Percentage of work completed, actual work completed, and
turning over As Built Drawings.
Bechtel National Inc. San Francisco, Ca. and Chicago, Il.
(7/1987 - 1988)
Cost Engineer, Planner/Scheduler
This project was known as The Nabisco Retrofit Project and
Facilities Modernization Program. I started out preparing cost
estimates for the purchase of food processing machinery and
equipment for four bakeries. I was later moved to the Project
Controls dept., where I was taught Planning/Scheduling using
Primavera in DOS format. I then prepared base line schedules for
the Richmond bakery. These schedules incorporated cost, manpower
allocations, and resources.
UBM Incorporated Chicago, Illinois
(3/1984 - 6/1987)
Resident Engineer, Field Superintendent
. O'Hare International Airport Development Program -
Responsibilities were to ensure contract compliance with the
FAA, DPW, and other City of Chicago Aviation authorities,
regarding construction projects on a airport. I had four
projects which were the installation of water and sewer
lines, electrical utilities, and a major roadway for access
to the airports Southwest corridor. Tenant work involved
design review work and monitoring all construction either
directly or through field engineers. Some aspects of work
were to jack pipe underneath several taxi ways and one
runway.
. Center for Successful Child Development Center - Renovation
of a Chicago Housing Project Building, for the use as a youth
and day care facility. Supervised construction and ensured
contract compliance. Monitored the project through the use of
Field Inspectors.
. Northwestern University Basic Industry Research Laboratory -
Prepared cost estimates, contract modifications, and
established engineering controls. Performed site supervision
for the development and structural framing of a nuclear
facility.
Prior to March of 1984 and upon graduation from college, I've held
the following responsible positions for the firms cited below
located in Chicago, Illinois.
Bevins Consultants Inc., Civil Engineer promoted to Project
Engineer (6/1981 - 3/1984)
Lester B. Knight & Associates, Civil Engineer in the Process
Dept. (6/1979 - 6/1981)
Contact this candidate